高效毛细管电泳法检测鸡肉中青霉素类药物残留量

用4种不同的样品前处理方法,即①磷酸二氢钠萃取法(SE)、②磷酸二氢钠萃取-固相萃取法(SE-SPE)、③基质固相分散萃取法(MSPDE)和④基质固相分散萃取-固相萃取法(MSPDE-SPE)对鸡肉样品做前处理,用高效毛细管电泳测定试液中青霉素、氨苄青霉素和阿莫西林等3种药物的残留量。回收试验和色谱分离结果表明:方法②用于高效毛细管电泳法同时测定鸡肉样品中3种青霉素类药物的样品前处理更为合适。方法的加标回收率在73.1%～95.9%之间,相对标准偏差(n=5)在2.9%～9.8%之间。     

溴的生物必需性(二)

根据微量元素必需性的经典定义,从溴的生态地球化学、溴的生物学功能及溴的人体健康效应方面论述了溴是生命必需微量元素的16项理由.分3期刊出.本期发表第二部分.     

热分析动力学数据处理方法的研究进展

综述了最近几年来用热分析法研究固相反应动力学的数据处理方法的新进展,指出了现有方法的成功与局限性,介绍了几种新的动力学处理方法及一种新的热分析技术。     

N-[2-(4-甲基)嘧啶基]-N′-2-硝基苯磺酰脲的合成、晶体结构、生物活性及其与酵母AHAS的分子对接

合成了磺酰脲化合物N-[2-(4-甲基)嘧啶基]-N′-2-硝基苯磺酰脲,用元素分析、红外、核磁共振氢谱对产物进行了表征,培养并测定了其晶体结构.晶体属三斜晶系,P1空间群,晶胞参数a=0.54159(1)nm,b=1.1533(3)nm,c=1.1857(4)nm,α=83.907(6)°,β=81.048(5)°,γ=77.637(4)°,V=0.7126(4)nm3,Dc=1.572g/cm3,Z=2,F(000)=348,R=0.0659,wR=0.1217.在晶体结构中,杂环上的一个N原子与脲桥上邻近的N原子上的H构成分子内氢键.测定了对酵母AHAS的离体抑制活性,其抑制常数Ki为(2.48±0.35)×10-7mol/L.用分子对接方法,将目标化合物晶体结构对接到靶酶酵母AHAS的活性位点,发现对接完毕目标化合物的构象与复合物晶体中的磺酰脲分子构象接近,并得到了合理的生物活性预测值.该研究为进一步理解磺酰脲类的分子结构、药物活性并设计新的分子提供了帮助和指导.     

2,5-二取代-1,3,4-噻二唑衍生物的一锅法合成、结构表征及生物活性研究

采用超声波辐射与相转移催化联用技术, 一锅法合成出了8个新的2-(1-萘乙酰氨基)-5-芳氨甲基-1,3,4-噻二唑化合物, 这种合成方法具有反应条件温和、反应时间较短、产率较高等特点. 新化合物的结构利用IR, ¹H NMR, ¹³C NMR, 1D NOE, MS和元素分析进行了表征. 人环氧酶-2 (COX-2)活性抑制实验结果表明, 目标化合物5f对COX-2具有很强的抑制活性, 抑制率高达95.59%; 化合物5g对COX-2也具有一定的抑制活性. 目标化合物无抗惊厥活性.     

Thermal stability of Li2O-SiO2-CaO-P2O5-F glass

Two glasses, the first one with the composition of Li₂O·2SiO₂ and the second one with the addition of CaO, P₂O₅ and CaF₂ in the stoichiometric ratio corresponding to fluoroapatite were prepared and their tendency to crystallize has been studied by non-isothermal DTA analysis. The values of kinetic parameters calculated using the isoconversional integral method have been used to determine the temperature dependencies of both the length of isothermal induction period and the length of overall isothermal crystallization for both glasses. The estimated dependencies indicate that the glass containing CaO, P₂O₅ and CaF₂ has a lower thermal stability.     

Magnetic microsphere-based methods to study the interaction of teicoplanin with peptides and bacteria

Teicoplanin (teic) from Actinoplanes teichomyceticus is a glycopeptide antibiotic used to treat many Gram-positive bacterial infections. Glycopeptide antibiotics inhibit bacterial growth by binding to carboxy-terminal d-Ala-d-Ala intermediates in the peptidoglycan of the cell wall of Gram-positive bacteria. In this paper we report the derivatization of magnetic microspheres with teic (teic-microspheres). Fluorescence-based techniques have been developed to analyze the binding properties of the microspheres to two d-Ala-d-Ala terminus peptides. The dissociation constant for the binding of carboxyfluorescein-labeled d-Ala-d-Ala-d-Ala to teic on microspheres was established via fluorimetry and flow cytometry and was determined to be 0.5 × 10⁻⁶ and 3.0 × 10⁻⁶ mol L⁻¹, respectively. The feasibility of utilizing microparticles with fluorescence methods to detect low levels (the limit of bacterial detection was determined to be 30 colon-forming units; cfu) of Gram-positive bacteria has been demonstrated. A simple microfluidic experiment is reported to demonstrate the possibility of developing microsphere-based affinity assays to study peptide–antibiotic interaction.     

A comparative study of calibration transfer methods for determination of gasoline quality parameters in three different near infrared spectrometers

This work presents a comparative study of calibration transfer among three near infrared spectrometers for determination of naphthenes and RON (Research Octane Number) in gasoline. Seven transfer methods are compared: direct standardization (DS), piecewise direct standardization (PDS), orthogonal signal correction (OSC), reverse standardization (RS), piecewise reverse standardization (PRS), slope and bias correction (SBC) and model updating (MU). Two pre-treatment procedures, namely standard normal variate (SNV) and multiplicative scatter correction (MSC), are also investigated. The choice of an appropriate number of transfer samples for each technique, as well as the effect of window size in PDS/PRS and OSC components, are discussed. A broad set of gasoline samples representative of the Northeastern states of Brazil is employed in the investigation. The results show that the use of calibration transfer yields prediction errors comparable to those obtained with complete recalibration of the secondary instrument. Overall, the results point to RS as the best method for the analytical problem under consideration. When storage and/or physical transportation of transfer samples are impractical, MU is more appropriate. The comprehensive investigation carried out in the present work will be of value for practitioners involved in networks of fuel monitoring.     

β-TCP/HAP多孔生物陶瓷的制备

以牛松质骨为原料,采用低温煅烧工艺,通过调整浸泡溶液浓度及煅烧温度等工艺参数,制备出具有良好生物活性,并保持天然骨多孔结构的β-TCP/HAP双相生物陶瓷。并采用XRD,SEM等手段对其成分、微观结构进行表征。结果表明:所制备的β-TCP/HAP多孔生物陶瓷的大孔孔径在300~500μm之间,微孔孔径在1~5μm之间,具有良好的生物活性和生物可降解性。通过控制煅烧温度和浸泡溶液浓度,制备出含较高TCP的β-TCP/HAP多孔生物陶瓷,而煅烧温度或浸泡溶液浓度过高会导致制备的样品中TCP的含量降低,焦磷酸钙的含量增加。     

水岩耦合变形破坏过程及机理研究进展

坝址水力劈裂、煤矿和隧道突水以及水力压裂工程都是岩体损伤演化积累诱发破坏 (灾变) 的过程,然而能否正确认识和评价这些过程取决于人们对水岩耦合变形破坏过程和机理的研究程度. 阐述了岩石渗流 --变形 --破坏特性及机理研究的进程, 侧重于物理实验成果. 综述了水岩耦合变形破坏过程分析模型和数值计算, 特别是有限单元法处理裂纹的思路, 并介绍了作者课题组近年来所取得的一些代表性成果. 给出了当前理论 (数值) 研究中所面临的几个具体问题和挑战, 并对今后研究工作进行了力所能及的展望.