Direct monitoring of drug degradation by easy ambient sonic-spray ionization mass spectrometry: the case of enalapril

Using enalapril maleate as a test case, the ability of ambient mass spectrometry, namely, via easy ambient sonic‐spray ionization mass spectrometry (EASI‐MS), to perform direct monitoring of drug degradation has been tested. Two manufacturing processes were investigated (direct compression and wet granulation), and the formation of degradation products was measured via both EASI‐MS and high‐performance liquid chromatography with ultraviolet detection for a total period of 18 months. Both techniques provide comparable results, which indicate that direct analysis by ambient mass spectrometric techniques presents a viable alternative for drug degradation monitoring with superior simplicity, throughput, and reliability (no sample manipulation), and comparable quantitative results. In terms of qualitative monitoring, the full mass spectra with intact species provided by EASI‐MS allow for comprehensive monitoring of known and unknown (or unexpected) degradation products. Copyright © 2011 John Wiley & Sons, Ltd.     

Sieve-based device for MALDI sample preparation. III. Its power for quantitative measurements

The solid sample inhomogeneity is a weak point of traditional MALDI deposition techniques that reflects negatively on quantitative analysis. The recently developed sieve-based device (SBD) sample deposition method, based on the electrospraying of matrix/analyte solutions through a grounded sieve, allows the homogeneous deposition of microcrystals with dimensions smaller than that of the laser spot. In each microcrystal the matrix/analyte molar ratio can be considered constant. Then, by irradiating different portions of the microcrystal distribution an identical response is obtained. This result suggests the employment of SBD in the development of quantitative procedures. For this aim, mixtures of different proteins of known molarity were analyzed, showing a good relationship between molarity and intensity ratios. This behaviour was also observed in the case of proteins with quite different ionic yields. The power of the developed method for quantitative evaluation was also tested by the measurement of the abundance of IGPP[Oxi]GPP[Oxi]GLMGPP (m/z 1219) present in the collagen-α-5(IV) chain precursor, differently expressed in urines from healthy subjects and diabetic-nephropathic patients, confirming its overexpression in the presence of nephropathy. The data obtained indicate that SBD is a particularly effective method for quantitative analysis also in biological fluids of interest.     

Coating of titanium implant materials with thin polymeric films for binding the signaling protein BMP2

A fast and simple approach for immobilization using copolymers as interlayers is reported. The synthesized copolymers form stable self-assembled layers on implant materials like, e.g., titanium in a simple coating/drying/washing sequence and have functional groups which can bind proteins from an aqueous solution. The copolymer films have been characterized via ellipsometry and contact angle measurements and were tested for biocompatibility. An immunoassay was used to determine the amount of BMP2 and demonstrated an approximately 10-fold increase as compared to previously used self-assembled monolayers. A BMP2-responsive cell line with luciferase detection was used to determine the biological activity of the bound signaling protein.     

Functionalization of Silk Fibroin with NeutrAvidin and Biotin

New methods are needed to modify silk biomaterials with bioactive molecules for tissue engineering and drug delivery. In the present study, silk fibroin in solution or in microsphere format was coupled with NeutrAvidin via carbodiimide chemistry. Silk fibroin retained its self‐assembly features after reaction. It was found that more than four NeutrAvidin molecules bound to one silk molecule. Non‐specific binding of biotin or NeutrAvidin to silk microspheres could be reduced by pre‐treatment of the microspheres with BSA or post‐treatment with detergent. The NeutrAvidin‐coupled silk microspheres were coupled with biotinylated anti‐CD3 antibody and the functionalized microspheres were able to specifically bind to the CD3 positive T‐lymphocytic cell line Jurkat.

     

Synthesis of a difunctional orthogonal coupler for the preparation of carbohydrate-functionalized sP(EO-stat-PO) hydrogels

The synthesis and characterization of a new difunctional coupler (4) based on trimethylolpropane (TMP) are described. The coupler is used to connect biologically active N-acetylglucosamine (GlcNAc) on amino-reactive microtiter plates and on star-shaped poly[(ethylene oxide)-stat-(propylene oxide)] hydrogel layers in microtiter plates. The biological activity of immobilized carbohydrates is determined using an enzyme-linked lectin assay.     

Poly(D,L-lactide)-block-poly(2-hydroxyethyl acrylate) block copolymers as potential biomaterials for peripheral nerve repair: in vitro and in vivo degradation studies

The properties of poly(D ,L ‐lactide)‐block‐poly(2‐hydroxyethyl acrylate) (PLA‐b‐PHEA) block copolymers by means of in vitro / in vivo (rat) degradation are investigated and compared to those of PLA homopolymer. Over 12 weeks, we observe mass loss and molecular weight decrease. In vitro and in vivo findings are very similar for each polymer tested. When a short PHEA block is used (PLA‐b‐PHEA 15 000–3 000 g · mol^?1, 85/15 wt%), the degradation process is found to be very similar to that of homo‐PLA, and to be typical of a bulk erosion mechanism, with no mass loss observed until week 7 and continuous decrease of molar mass within this timeframe. For a longer PHEA block length within the block copolymer (PLA‐b‐PHEA 15 000–7 500 g · mol^?1, 65/35 wt%), the degradation mechanism is modified, with a significant mass loss observed at early times and only a slight decrease in molar mass. The latter finding is related to the pronounced hydrophilicity and softness of the material induced by the PHEA block, which allow easy diffusion and rapid leakage of the degradation residues from the material towards the aqueous medium. Schwann cells are found to better adhere on spin‐coated films of PLA‐b‐PHEA (85/15 wt%) than on PLA ones. These results show the potential of such hydrophilized PLA‐based copolymers for use in peripheral nerve repair.

     

The effect of conjugating RGD into 3D alginate hydrogels on adipogenic differentiation of human adipose-derived stromal cells

The effects of RGD peptide conjugation to alginate hydrogel on the adipogenic differentiation of ASCs was investigated. After 3 d of culture, RGD-modified alginate hydrogels significantly stimulated FAK and integrin α1 gene expressions and vinculin expression in ASCs. In addition, RGD-modified alginate hydrogels significantly enhanced the adipogenic differentiation of human ASCs to exhibit higher expression levels of oil red O staining and adipogenic genes compared to those of the control group (unmodified gels). These results suggest potential applications of RGD-modified alginate gels for adipose tissue regeneration.     

Effect of sterilization on non-woven polyethylene terephthalate fiber structures for vascular grafts

Non-woven polyethylene terephthalate (PET) fibers produced via melt blowing and compounded into a 6 mm diameter 3D tubular scaffold were developed with artery matching mechanical properties. This work compares the effects of ethylene oxide (EtO) and low temperature plasma (LTP) sterilization on PET surface chemistry and biocompatibility. As seen through X-ray photoelectron spectroscopy (XPS) analysis, LTP sterilization led to an increase in overall oxygen content and the creation of new hydroxyl groups. EtO sterilization induced alkylation of the PET polymer. The in vitro cytotoxicity showed similar fibroblastic viability on LTP- and EtO-treated PET fibers. However, TNF-α release levels, indicative of macrophage activation, were significantly higher when macrophages were incubated on EtO-treated PET fibers. Subcutaneous mice implantation revealed an inflammatory response with foreign body reaction to PET grafts independent of the sterilization procedure.     

Poly(ester urethane) guides for peripheral nerve regeneration

A biocompatible and elastomeric PU was synthesized from low-molecular-weight PCL as macrodiol, CMD as chain extender and HDI as chain linker for applications in the field of peripheral nerve repair. PU cast films supported in vitro attachment and proliferation of NOBEC. The in vitro adhesion and proliferation of S5Y5 neuroblastoma cells on the inner surface of uncoated, gelatin- and PL-coated PU guides were compared. Due to their superior in vitro performance, PL-coated PU guides were tested in vivo for the repair of 1.8 cm-long defects in rat sciatic nerves. The progressive regeneration was confirmed by EMG and histological analysis showing the presence of regenerating fibers in the distal stumps.     

Image printing on the surface of anti-biofouling zwitterionic polymer brushes by ion beam irradiation

A CMB monomer was polymerized on a glass plate with a surface-confined ATRP initiator containing a 2-bromoisobutyryl group. The glass plate modified with a PCMB brush was highly hydrophilic and showed a strong resistance against non-specific adsorption of proteins and cell adhesion. Upon ion beam irradiation, furthermore, the PCMB brush was ablated and a hollow space with a designed shape could be made to which HEK293 cells (from human embryonic kidney) and Hep G2 (from human hepatoma) cells non-specifically adhered, while no adhesion of these cells to the non-treated area on the brush was observed. The present results clearly indicate the usefulness of ion beam-printed patterns of anti-biofouling zwitterionic polymer brushes in the biomedical field.