Nanosecond Time-Gated Spectroscopy of Laser-Ablation Plume of Human Hair to Detect Calcium for Potential Diagnoses

We demonstrate the nanosecond time-gated spectroscopy of plume luminescence in UV laser ablation of human hair. Clear and sharp peaks of calcium ion (Ca⁺) appear in the spectrum although the Ca content is only 0.1% in human hair. Highly sensitive detection of Ca is thus possible. In the experiment, the peak intensity of Ca⁺ was measured for human hair samples of female subjects over a wide range of age, and compared to the bone mineral density of the lumbar vertebrae of the subjects themselves. Our experimental results suggest that this specific spectroscopy has the potential for novel diagnoses including monitoring of daily Ca intake and a screening diagnosis of osteoporosis. The spectroscopic system and time transition of plume-luminescence spectra are also described.     

高温等离子体中固体弹丸消融过程的研究

本文求得了弹丸消融过程的自洽解析解。结果表明:Parks的弹丸消融理论需要修正;弹丸消融速率由消融物云和表面蒸发层共同控制;入射电子通过消融物云时慢化效应并不显著;消融物离开弹丸表面时一般呈部分电离态;聚变堆条件下,弹丸表面可能会出现激波。     

Micro-fabricated metal nozzle plates used for water-in-oil and oil-in-water emulsification

In this paper the fabrication and use of micro-structured metal nozzle plates as emulsification devices is investigated and discussed. These structured metal nozzle plates were fabricated via two distinct routes. Laser ablation, performed with a femtosecond laser, was used to drill micrometer-sized holes into stainless steel and aluminum foils. Also a conventional steel mesh with an average pore size of 2.4 μm fabricated by weaving and roll compaction of micrometer-sized steel wires was investigated. The perforated metal nozzle plates were used for oil-in-water and after hydrophobization with alkylchlorosilanes for water-in-oil emulsification as well. In both cases, two types of drop formation processes were observed. The first one is the shear-induced drop formation well known for cross-flow membrane emulsification. The second is the spontaneous drop formation known from microchannel emulsification.     

Femtosecond laser ablation profile near an interface: Analysis based on the correlation with superficial properties of individual materials

Femtosecond laser ablation of materials is turning to be an important tool for micromachining as well as for selective removal of biological tissues. In a great number of applications, laser ablation has to process through interfaces separating media of different properties. The investigation of the ablation behavior within materials and passing through interfaces is the main aim of this study. Especially, the analysis of the discontinuity in the ablation profile close to interfaces between distinct materials can reveal some of the phenomena involved in the formation of an ablated microcavity geometry. We have used a method that correlates the ablation cross sectional area with the local laser intensity. The effective intensity ablation properties were obtained from surface ablation data of distinct materials. The application of this method allows the prediction of the occurrence of a size discontinuity in the ablation geometry at the interface of distinct media, a fact which becomes important when planning applications in different media.     

Preparation and characterization of SnO2 nanoparticles using high power pulsed laser

Tin dioxide (SnO₂) nanoparticles having 3 nm size were synthesized by irradiating pure tin metal using high power Nd:YAG laser in deionized water. Formation of nano-SnO₂ crystallites was confirmed by X-ray diffraction (XRD) and AFM study. UV-vis absorption spectral studies showed a peak at 240 nm. FTIR spectrum showed a band in the range of 400-700 cm⁻¹ which was assigned to Sn-O antisymmetric vibrations. Photoluminescence spectrum of synthesized SnO₂ nanoparticles showed peak corresponding to 3.175, 2.901 and 2.613 eV respectively.     

Formation of microvias in epoxy-glass composites by laser ablation

Single CO₂ laser pulses, of 10.6μm wavelength, are used to form blind microvias (holes in electronic boards for through-plating conducting paths) in copper-clad epoxy-glass laminates. The microvia dimensions depend on pulse energy and duration, the thicknesses of the epoxy-glass laminate and copper cladding, and the distribution of glass within the epoxy-glass laminate. The useful range of laser parameters, especially pulse energy, is primarily determined by the ability to metallize subsequently the blind microvias. Several conclusions can be drawn from the data. The pulse enegy should be within ±20% of the optimum value in order to form vias with a cylindrical geometry. For 300 μm thick laminates, the thickness of the copper on the bottom should be 18 μm or more. A larger range of pulse energies could be used if the glass fibre density was more uniform and if subsequent copper metallization of the blind vias could be improved.     

Preparation and characterization of copper(II) tetrasulfonated phthalocyanine nanoparticles formed by laser ablation in poor solvents

Laser irradiation of copper(II) tetrasulfonated phthalocyanine (CuTsPc) microcrystals in poor organic solvents such as methanol, 2-methyl-2-propanol, ethanol, tetrahydrofuran, and acetone has produced CuTsPc nanoparticles with 15–112 nm in diameter. Field emission scanning electron microscopy (FESEM) images have shown the formation of CuTsPc nanoparticles in poor organic solvents used in this work. The mean diameters of CuTsPc nanoparticles obtained from transmission electron microscopy (TEM) images in methanol, 2-methyl-2-propanol, ethanol, tetrahydrofuran, and acetone were determined to be 26, 36, 35, 86, and 78 nm, respectively. A correlation between the size of CuTsPc nanoparticles and a solvent polarity could be found in this work.     

Nanocarbon-poly(methyl methacrylate) composite materials

Nanocarbon-poly(methyl methacrylate) sols were prepared by pulsed laser ablation at the interface of target submerged in flowing liquid (PLA-IT/SFL) method, and the corresponding composite films were prepared by solution-casting. Spectra results indicated that there existed interactions between nanocarbon and the polymethyl methacrylate (PMMA) matrix, which was consistent with the decrease in glass transition temperature of the composites with increase of carbon content. TEM images revealed that a carbon encapsulated core/shell structure was formed in the composites, which could ensure good dispersion of carbon nanoparticles within the PMMA matrix. The decomposition of the composites was less influenced by the introduction of nanocarbon particles. Translated from Acta Polymerica Sinica 2006, 2(2) (in Chinese)     

考虑偏好序且权重未知的群双边匹配决策

考虑匹配主体是群且成员权重未知,提出一种基于偏好序信息的群双边匹配决策方法.先给出群双边匹配、综合满意度等概念.使用极大极小离差法求出主体群的成员权重,并通过OWA算子进行集结、生成一方主体群对另一方主体群的综合满意度.以最大化双方主体群的综合满意度之和为目标,建立0~1单目标优化模型并对模型解法进行拓展,求解模型获得最优匹配方案.最后通过实例说明该方法的简单、有效性.     

Calibration for Elemental Dental Tissue Analysis by Laser Ablation Inductively Coupled Plasma Mass Spectrometry

Teeth retain different elements at particular stages of life. Hence, the exposure over a selected time span may be characterized by laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS). A Nd:YAG laser with emission at 266?nm was coupled to a quadrupole ICP-MS for the quantitative study of historical human teeth for Sr and Ba, elements of anthropological significance. A calibration approach incorporating the experimentally derived k coefficient is reported. The coefficients were established based on the mean concentrations of the analytes determined by pneumatic nebulization ICP-MS using acid-digested calcium phosphate standards and the intensities recorded during laser ablation of corresponding standards as pellets. The k values were 0.54?±?0.05 (µg?g^?1)^?1 and 4.49?±?1.09 (µg?g^?1)^?1 for Sr and Ba, respectively. This calibration approach provided local quantitative data and demonstrated statistically significant differences in Sr concentrations in enamel and dentine.