3D C/C复合材料的电弧驻点烧蚀及机理分析

采用电弧驻点烧蚀试验方法,测试细编穿刺毡增强体C／C复合材料的烧蚀率,并采用电子扫描显微镜观察烧蚀表面形貌。研究结果表明:在电弧驻点烧蚀试验条件下,3D C／C复合材料具有较好的烧蚀性能;C／C复合材料的烧蚀过程主要受热化学烧蚀和机械剥蚀2种烧蚀机制的共同作用,二者相互促进,以机械剥蚀为主;微观烧蚀形貌主要由热化学化蚀导致,宏观烧蚀形貌则主要是机械剥蚀所致。     

激光刻蚀银纳米粒子岛膜的SERS特性

利用激光刻蚀的方法,通过改变激光脉冲的能量,制备出一系列的纳米金属银胶体。将银胶体沉积在铝基底上形成一层银岛膜。用紫外—可见吸收光谱、SEM及拉曼光谱对银胶体和银岛膜进行了表征。研究结果表明,刻蚀所用激光脉冲的能量影响胶体中银颗粒的分布;不同能量下制备的胶体所形成的银岛膜具有不同的表面增强效果;该岛膜具有增强效果优异、制备简便等特点。     

Surface texturing of Si, porous Si and TiO2 by laser ablation

Excimer laser ablation at 308 nm has been used to texture the surfaces of a variety of materials of interest for optoelectronic and biotechnological applications. Using a range of pre- and post-processing methods, we are able to produce nano-, micro- and meso-scale features over large areas rapidly in materials such as crystalline Si, porous silicon and TiO₂. Texturing of porous silicon leads to the growth of crystalline dendritic structures, which distinguishes them dramatically from the conical pillars formed from crystalline silicon. Regular arrays of Si microdots are formed by irradiating a Si surface pre-covered with a Cr thin film grating. Nano-crystalline porous TiO₂ films are easily ablated or compacted with laser irradiation. However, at low enough laser fluence, surface roughening without complete loss of porosity is possible.     

Nanoparticles size modifications during femtosecond laser ablation of nickel in vacuum

Nanoparticles were synthesized by irradiating a nickel target with femtosecond laser pulses in high vacuum, and subsequently analyzed. The proof-of-principle experiments aim to modify the size characteristics of the produced nanoparticles. For nickel it is found that: (i) ultraviolet laser pulses lead to a remarkable change in the nanoparticles size distribution with respect to visible laser pulses; (ii) irradiation of the femtosecond pulses induced ablation plume with a second, delayed ultraviolet laser pulse can change the size characteristics of the produced nanoparticles.     

Synthesis of nanoparticles and suspensions by pulsed laser ablation of microparticles in liquid

Recent studies demonstrated that the process to produce metal and oxide nanoparticles by laser ablation of consolidated microparticles is a convenient and energy-efficient way to prepare nanoparticles. In this work, the novel process is applied to nanoparticle synthesis in the liquid environment and the results are compared with those by the gas-phase process. Metal and oxide nanoparticles are synthesized by pulsed laser ablation of the compacted metal microparticles using a Q-switched Nd:YAG laser in water. It is shown that the process is effective for preparing nanoparticle suspensions having relatively uniform size distributions. While the laser fluence and the degree of compaction strongly influence the size of the produced nanoparticle in air, the sedimentation time is shown to be the most critical factor to determine the mean size of the suspended particles.     

Investigation of metal nanoparticles produced by laser ablation and their catalytic activity

Polydiphenylsilylenemethylene (PDPhSM) thin films, which are difficult to fabricate by conventional methods because of their insolubility and high melting point, have been synthesized by using laser-ablated metal nanoparticles for the thermal ring-opening polymerization of 1,1,3,3-tetraphenyl-1,3-disilacyclobutane (TPDC) in this paper. TPDC was first evaporated on silicon substrates and then exposed to metal (Pt, Cu and Ag) nanoparticles deposition by laser ablation prior to heat treatment. The catalytic activity of Pt, Cu and Ag nanoparticles has been studied. The results showed that the mean diameter of Pt nanoparticles was the smallest, Cu nanoparticles the moderate and Ag nanoparticles the biggest, while the polymerization efficiency for Pt nanoparticles was the highest, Cu nanoparticles the moderate and Ag nanoparticles the lowest. In addition, the penetration behaviours of Pt, Cu and Ag nanoparticles into the TPDC monomer films during laser ablation were different due to the particle size or the chemical interaction between metal nanoparticles and TPDC molecules.     

一种雾天退化场景快速复原方法

针对雾天条件下图像退化的问题,提出一种新的场景复原方法.首先,结合大气散射模型与光学反射成像的特性,对大气耗散函数提出物理约束条件,利用双边滤波的边缘保持特性得到大气耗散函数的初始估计.然后,引入局部均值与局部标准差近似估计图像对比度,从而降低对比度较强的部分区域的雾浓度估计来获取更加准确的大气耗散函数.最后,求解雾图成像方程,恢复理想光照条件下的辐射强度.实验结果表明:该方法对图像的细节和颜色恢复非常有效,并能有效克服边缘残雾现象以及颜色过饱和等不足.     

Numerical Modeling of Interior Ballistics Processes in Light Gas Guns

An improved procedure for modeling the operation of a light-gas gun is proposed. The motion of working bodies in both the firing chamber and the light-gas chamber is studied within the framework of the mechanics of heterogeneous media. The problem of barrel heating taking into account its melting and removal of thermal ablation products into the medium inside the bore is solved in a coupled formulation. Heat and mass transfer and friction on the barrel surface are calculated using empirical dependences. The deformable piston is considered compressible and elastoviscoplastic. Allowance is made for the presence of a clearance between the lateral surface of the piston and the barrel bore walls and the associated gas flow between the firing and the light-gas chamber. Calculation results are given.     

双面槽线色散特性的变分分析

运用镜像法简化了偶模激励双面槽线的分析模型，基于平面传输线传播常数满足的稳定的变分公式，给出了仅以槽口切向电场为变量的传播常数满足的变分公式。该公式计算速度快，计算结果与谱域法计算结果吻合较好。     

Calibration for Elemental Dental Tissue Analysis by Laser Ablation Inductively Coupled Plasma Mass Spectrometry

Teeth retain different elements at particular stages of life. Hence, the exposure over a selected time span may be characterized by laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS). A Nd:YAG laser with emission at 266?nm was coupled to a quadrupole ICP-MS for the quantitative study of historical human teeth for Sr and Ba, elements of anthropological significance. A calibration approach incorporating the experimentally derived k coefficient is reported. The coefficients were established based on the mean concentrations of the analytes determined by pneumatic nebulization ICP-MS using acid-digested calcium phosphate standards and the intensities recorded during laser ablation of corresponding standards as pellets. The k values were 0.54?±?0.05 (µg?g^?1)^?1 and 4.49?±?1.09 (µg?g^?1)^?1 for Sr and Ba, respectively. This calibration approach provided local quantitative data and demonstrated statistically significant differences in Sr concentrations in enamel and dentine.