Cellulose nanofibrils derived from pulp as a high performance separator for lithium-ion batteries

Cellulose nanofibrils (CNFs) from hardwood bleached kraft pulp (HwBKP) are produced via enzymatic, chemical, and mechanical treatment. A nanoporous structured CNF-based separator is produced, and the electrochemical performance, morphology, and thermal stability analyses are performed in comparison to the commercial polyethylene separator. The results obtained show that the electrolyte-philic CNF separator has capacity retention of 88.6% over 200 cycles and very good ionic conductivity and wettability results due to its high hydrophilic nature. At 140°C, the CNF separator was resilient to heat and remained intact. The CNF separator reflects high thermal resistance and good electrolyte uptake properties that are among the mandatory requirements of a separator hence, a promising contender for use in lithium-ion batteries.     

Upgrading of paper grade pulps to dissolving pulps by nitren extraction: yields,molecular and supramolecular structures of nitren extracted pulps

Different paper grade pulps were extracted with nitren in order to produce dissolving pulps and polymeric xylan. The yield and molecular structure of the extracted pulps were investigated by carbohydrate analysis and HPSEC combined with fluorescence labelling in order to additionally monitor the carbonyl and carboxyl group profiles of the pulps. The supramolecular structure of selected pulps were further studied by solid state ¹³C-CP/MAS-NMR and wide-angle X-ray scattering (WAXS). These supramolecular data of nitren extracted pulps were compared to samples extracted with NaOH and a conventional dissolving pulp in order to classify the properties of nitren extracted pulps. Nitren extraction results in selective xylan removal without noticeable degradation or oxidation of the cellulose fraction. The resulting dissolving pulps have high molar masses, a narrow molar mass distribution and the typical contents of carbonyl and carboxyl groups. The supramolecular structure of cellulose is less affected by nitren compared to strong NaOH, and the resultant dissolving pulps still have the cellulose I structure. All laboratories are members of the European polysaccharide network of excellence EPNOE.     

柑橘果肉果胶的流变和结构特性

以柑橘果肉为原料,采用稀酸提醇沉法提取果胶粗品,研究了果胶溶液的浓度及热处理温度对果胶溶液流变学性质的影响.采用DEAE Cellulose-52柱对柑橘果肉粗品进行洗脱得到3个多糖组分(P-0,P-1和P-2),对其分子量、半乳糖醛酸、单糖组成及酯化度等进行分析,并利用红外光谱及核磁共振氢谱等对各组分进行结构特性分析.结果表明,柑橘果肉果胶为典型的剪切稀化型非牛顿流体;P-0,P-1和P-2组分分子量存在显著差异;柑橘果肉果胶为富含糖醛酸的酸性多糖,且是发生部分乙酰化的低酯果胶,其单糖组成以半乳糖醛酸、半乳糖、阿拉伯糖、鼠李糖和岩藻糖居多,且均以Ⅰ型聚鼠李半乳糖醛酸(RG-Ⅰ型)结构为主;3种组分糖环类型均是吡喃糖,糖苷键既有α型,又有β型.     

湿法超微粉碎程度对白蕉鲈鱼鱼骨架浆理化性质及内含成分的影响

以白蕉鲈鱼鱼骨架为研究对象,分析湿法超微粉碎程度对白蕉鲈鱼鱼骨架浆理化性质、内含成分、微观结构和感官品质的影响。实验采用pH计、紫外分光光度计、色度仪、质构仪、激光粒径分析仪分析鱼骨架浆的基本理化性质,氨基酸自动分析仪测定氨基酸的种类和含量,扫描电镜观察其微观结构。结果显示:经过湿法超微粉碎之后,大于100目的样品粒径主要分布在50~100μm,而小于等于100目的样品主要分布在100~300μm。随着粉碎程度的增加,鱼骨架浆的pH值、紫外吸光度、白度、堆密度逐步增加,凝胶强度则呈现先增加后减少的趋势。当粉碎程度从20目增大到180目以上,钙溶出量从151.23mg/kg增长到270.06mg/kg,胶原蛋白的含量由0.01%增长到0.04%,游离氨基酸的含量从181.07ng/μL增长到462.70ng/μL,盐溶性蛋白含量从6.95mg/g增长到16.12mg/g,水溶性蛋白含量从2.15mg/g增长到7.13mg/g。扫描电镜结果显示:大于100目的样品颗粒较为平整均一,而小于等于100目的样品可以明显看到鱼刺。挥发性盐基氮的含量符合国家有关标准。综合感官评价认为,100目以上的鱼骨架浆可作为鱼粉、鱼丸等产品配料,而100目及以下的鱼骨架浆只适合添加到汤料包、酱料等原料颗粒大的产品之中。     

光注入半导体激光器产生可调谐高频微波

利用光注入半导体激光器产生的单周期振荡,实验获得了61—129 GHz范围内频率连续可调的微波光信号.同时利用半导体激光器速率方程,对光注入半导体激光器产生高频微波进行了数值模拟.模拟和实验结果均表明微波信号产生于注入光和激光器腔模之间的拍频现象,其频率随着注入光强度和波长失谐的增大而增大,模拟结果预测该方法可以产生频率大于40 GHz的高频微波. 关键词： 光通信 光生微波 拍频 半导体激光器     

Reactivity of Dissolving Pulp for Processing Viscose

Summary : Pulp reactivity is a kinetic term and is always connected with a certain derivatization process. The quality and hence the market value of the pulp is determined by such characteristics as α- cellulose content, solubility, brightness, ash content, as well as the amount of soluble material in dichloromethane. However, solubility data, especially S₁₈ and S₁₀ values do not characterise dissolving pulp reactivity. These are indicative of pulp solubility and provide some information regarding losses of material during pulp processing. One way by which the pulp reactivity for viscose making can be characterised is the investigation of the mercerisation step. Following the mercerisation kinetics by help of the molecular weight distribution of cellulose II the behaviour especially of the high molecular weight cellulose gives information regarding the accessibility and therefore, about the reactivity of the pulp aside from losses in low molecular weight cellulose. This behaviour will be shown on different pulps and the physicochemical background will be discussed in relation to results obtained from wide angle X-ray scattering and Raman investigations. The influence of the behaviour of the pulp during mercerising on the viscose process, and the molecular weight distribution of the viscose including the distribution of the xanthogenate groups along the chain was investigated and will also be discussed.     

离子色谱-双阳极电化学氢化物发生-原子荧光光谱法测定Ⅰ型牙髓失活材料中的砷形态

将自制的双阳极电化学氢化物发生器作为离子色谱与原子荧光光谱的联用接口,建立了离子色谱-双阳极电化学氢化物发生-原子荧光光谱法在线分析砷形态系统.最佳实验条件为淋洗液6.0 mmol/L NH4H2PO4(pH 6.20),电解液0.40 mol/L H2SO4,电解液流量为阳极4.0 mL/min,阴极 1.5 mL/min,电解电流密度0.50 A/cm.2,载气流量300 mL/min,屏蔽气流量500 mL/min,氢气流量80 mL/min.在优化的实验条件下,As(Ⅲ)、DMA、MMA的线性范围为5～200 μg/L、As(Ⅴ)的线性范围为10～200 μg/L,As(Ⅲ)、DMA、MMA和As(Ⅴ)检出限分别为3.04、4.27、3.97和9.30 μg/L(信噪比S/N=3).50 μg/L的As(Ⅲ)、DMA、MMA和As(Ⅴ)混合标准溶液平行进样7次,得到的色谱峰面积的相对标准偏差(RSD)分别为415%、3.08%、519%和3.62%.将该方法用于牙髓失活材料中的砷形态分析.     

关键层理论在保水开采中的应用

在绿色开采思想的指导下,对关键层理论在保水开采中的应用进行了分析。通过算例讨论了三者的关系并分析了岩层变形一渗流耦合系统的复杂性特征,提出应用复杂系统动力学理论解释突水机制的初步设想。研究表明,在承载关键层破断前,承载关键层同时也是保水关键层;在承载关键层破断后,不再具有隔水作用,而保水关键层此时由渗流关键层充当;如果承载关键层破断,并且渗流关键层不存在,则会发生突水现象。岩层变形一渗流耦合动力学系统是具有时变边界、非线性、非均匀性和非连续性等特征的复杂系统。将复杂系统动力学引入突水防治理论研究,可以从本质上描述突水的过程。     

碱抽提强化的麦草浆ClO_2漂白及ECF漂白流程

采用常规碱抽提(E)、氧加强的碱抽提(EO)、H2O2强化的碱抽提(EP)、氧和H2O2强化的碱抽提(EOP)对ClO2脱木素(D0)麦草浆进行改性,考查不同碱抽提方式的改性效果在后续漂段(D1)的体现,并就不同无元素氯(ECF)漂白流程(D0ED1、D0P、D0A/QP、D0EP、D0EPD1、D0EPP)进行对比.结果表明:不同碱抽提方式对D0浆木素的改性效果不同,就对后续漂段D1的影响而言,4种不同碱抽提方式下纸浆的可漂性顺序为D0EOPD0EPD0EOD0E;在4种碱抽提方式所对应的D0ED1漂白流程中,D1段ClO2用量的增加对白度的提升是有限的,以0.8%~1.0%为佳;D0EPD1和D0EPP流程漂白效果优于其它流程,采用D0EPD1和D0EPP流程漂后白度可分别达到82.3%ISO和83.8%ISO,均适用于麦草浆短序ECF漂白.     

不同结构竹浆纱线的应力松弛性能研究

以2个Maxwell并联的四元件模型为基础,利用波尔兹曼叠加原理建立纱线应力松弛变化过程的理论方程,并分别对竹浆紧密纺、赛络纺和喷气涡流纺(MVS)纱线进行应力松弛实验.基于应力松弛理论模型,利用非线性回归拟合法求得纱线应力松弛的回归方程,分析了3种不同结构竹浆纱线的应力松弛机制.实验结果表明,理论值与实测值具有良好的相关性,所用模型可以预测不同结构竹浆纱线的松弛性能.在消耗各纱线断裂伸长30%形变的情况下,竹浆紧密纱应力松弛现象最严重,赛络纱次之,喷气涡流纱最小.