Surface Modification of GTA Crosslinked Collagen‐based Composite Scaffolds with Low Temperature Plasma Technology

In this study for preparing the better performance scaffold materials for peripheral nerve repairing, the collagen‐based composite scaffolds are crosslinked with glutaraldehyde and their structure and performance are investigated. The results of FTIR indicated that the collagen and chitosan are certainly crosslinked through GTA without any significant change in the chemical property. It was observed under a scanning electron microscope (SEM) that the crosslinked collagen‐based composite scaffolds had a porous three‐dimensional cross‐linked structure. The experiments showed that the biostability of the scaffold is greatly enhanced, but the GTA crosslinking induces the potential cytotoxicity and poor hydrophilic nature. To overcome these disadvantages, the low temperature plasma technology is utilized to modify the surface of the cross‐linked collagen‐based composite scaffolds in this study. Measurements of water contact angle showed that hydrophilic nature of surface of the scaffolds was improved after low temperature plasma technology modification. The cell proliferation experiments revealed that the modified collagen‐based composite scaffolds still kept their bioactivity and benefited the proliferation.     

Optimization of the HPLC enantioseparation of 3,3′‐dibromo‐5,5′‐disubstituted‐4,4′‐bipyridines using immobilized polysaccharide‐based chiral stationary phases

The HPLC enantioseparation of nine atropisomeric 3,3′,5,5′‐tetrasubstituted‐4,4′‐bipyridines was performed in normal and polar organic (PO) phase modes using two immobilized polysaccharide‐based chiral columns, namely, Chiralpak IA and Chiralpak IC. The separation of all racemic analytes, the effect of the chiral selector, and mobile phase (MP) composition on enantioseparation and the enantiomer elution order (EEO) were studied. The beneficial effect of nonstandard solvents, such as tetrahydrofuran (THF), dichloromethane (DCM), and methyl t‐butyl ether on enantioseparation was investigated. All selected 4,4′‐bipyridines were successfully enantioseparated on Chiralpak IA under normal or PO MPs with separation factors from 1.14 to 1.70 and resolutions from 1.3 to 6.5. Two bipyridines were enantioseparated at the multimilligram level on Chiralpak IA. Differently, Chiralpak IC was less versatile toward the considered class of compounds and only five bipyridines out of nine could be efficiently separated. In particular, on these columns, the ternary mixture n‐heptane/THF/DCM (90:5:5) as MP had a positive effect on enantioseparation. An interesting phenomenon of reversal of the EEO depending on the composition of the MP for the 3,3′‐dibromo‐5,5′‐bis‐(E)‐phenylethenyl‐4,4′‐bipyridine along with an exceptional enantioseparation for the 3,3′‐dibromo‐5,5′‐bis‐ferrocenylethynyl‐4,4′‐bipyridine (α = 8.33, R_s = 30.6) were observed on Chiralpak IC.     

Properties of two amide‐based hydrophilic interaction liquid chromatography columns

Hydrophilic interaction liquid chromatography is a separation technique suitable for the separation of moderately and highly polar compounds. Various stationary phases (SPs) for hydrophilic interaction liquid chromatography are commercially available. While the SPs based on the same type of ligand are available from different providers, they can display a distinct retention characteristics and separation selectivity. The current work is focused on characterization and comparison of the separation systems of two amide‐based HPLC columns from two producers, i.e. XBridge Amide column and TSK gel Amide‐80 column. Several characterization procedures (tests) were used to investigate the differences between these columns. The chromatographic behavior of selected analytes indicates that multimodal interactions are responsible for retention and separation on these columns. Multiple testing approaches were used in order to reveal subtle differences between the SPs. Both amide‐based columns showed certain differences in retention, selectivity, and plate counts. Based on the tests used in this study, we conclude that the investigated columns provide a different degree of H‐bonding interactions.     

Comparison of various silica‐based monoliths for the analysis of large biomolecules†

In the present study, three types of silica‐based monoliths, i.e. the first and second generations of commercial silica monolithic columns and a wide‐pore prototype monolith were compared for the analysis of large biomolecules. These molecules possess molecular weights between 1 and 66 kDa. The gradient kinetic performance of the first‐generation monolith was lower than that of the second generation, for large biomolecules (>14 kDa) but very close with smaller ones (1.3–5.8 kDa). In contrast, the wide‐pore prototype column was particularly attractive with proteins larger than 19 kDa (higher peak capacity). Among these three columns, the selectivity and retention remained quite similar but a possible larger number of accessible and charged residual silanols was noticed on the wide‐pore prototype material, which led to unpredicted small changes in selectivity and slightly broader peaks than expected. The peak shapes attained with the addition of 0.1% formic acid in the mobile phase remained acceptable for MS coupling, particularly for biomolecules of less than 6 kDa. It was found that one of the major issues with all of these silica‐based monoliths is the possible poor recovery of large biomolecules (principally with monoclonal antibody fragments of more than 25 kDa).     

Preparation and characterization of octadecyl acrylate monoliths for capillary electrochromatography by photochemical,thermal, and chemical initiation†

Monolithic stationary phases based on octadecyl acrylate for CEC using different initiating systems (UV irradiation, thermal, and chemical initiation) in the presence of lauroyl peroxide as initiator were synthesized. For each initiation mode, the influence of the porogenic solvent composition on both the morphological and electrochromatographic properties of the resulting monoliths was investigated. Under optimal conditions, excellent efficiencies for the photochemically and chemically polymerized monoliths (minimum plate heights of 6.9–10.7 and 6.5–12.6 μm, respectively) were achieved. Thermally initiated columns gave lower efficiency values, permeabilities, and longer analysis times compared to these initiating systems. The produced monolithic stationary phases were evaluated in terms of reproducibility and gave RSD values below 9.2, 10.6, and 9.8% for UV, thermally, and chemically initiated columns, respectively.     

High‐Efficiency Conversion of Trimethylsilyl Ethers to Their Corresponding Ethers using Carbon‐Based Solid Acid as a New Catalyst in Heterogeneous Mixtures

Carbon‐based solid acid was used as a new catalyst for conversion of trimethylsilyl ethers to their corresponding ethers in heterogeneous mixtures. The experiments were done moderately at room temperature, and high yields in suitable times were obtained under these conditions.     

Mild conversion of propargylic alcohols to α,β-unsaturated enones in ionic liquids (ILs); a new ‘metal free’ life for the Rupe rearrangement

A mild and selective transition metal free protocol for the conversion of propargylic alcohols to cyclic and acyclic α,β-unsaturated enones via the Rupe rearrangement is reported. The method utilizes the Brønsted acidic ionic liquid [BMIM-SO₃H][OTf] as catalyst and [BMIM][PF₆] as solvent and offers the potential for recycling and reuse of the IL solvent. The feasibility to synthesize bicyclic fused cyclopentenone derivatives via a Rupe → Aldol → Nazarov sequence utilizing this protocol has also been demonstrated.     

Synthesis of Some Unusual (1,2,4‐Oxadiazole)‐Linked Hexenopyranosides and Mannopyranosides

A copper‐catalyzed reaction of propargyl 4,6‐di‐O‐acetyl‐2,3‐dideoxy‐α‐D‐erythro‐hex‐2‐enopyranoside with 3‐(4‐azidophenyl)‐1,2,4‐oxadiazoles gave the corresponding hexenopyranosides bearing an 1,2,4‐oxadiazole subunit in the aglyconic part of the molecule. The same reaction between ethyl 4‐azido‐2,3,4‐trideoxy‐α‐D‐erythro‐hex‐2‐enopyranoside and acetylenic 1,2,4‐oxadiazoles afforded the corresponding hexenopyranosides carrying a triazole and a 1,2,4‐oxadiazole ring at C‐4 of the carbohydrate. Combination of the two sequences gave hexenopyranosides displaying two 1,2,4‐oxadiazole subunits, each one being embedded in the C‐1 and C‐4 frameworks, of the carbohydrate moiety. A simple dihydroxylation reaction of these unsaturated carbohydrates yielded a series of mannopyranosides bearing one or two 1,2,4‐oxadiazole subunits at C‐1 or C‐4. These new compounds were evaluated for their cytotoxic activities against two cell strains: NCI‐H₂₉₂ (lung carcinoma) and Hep‐2 (larynx carcinoma), some of them presenting impressive cell growth inhibitions.     

Design and Synthesis of a γ1β8‐Cyclodextrin Oligomer: A New Platform with Potential Application as a Dendrimeric Multicarrier

We report the synthesis and characterization of a water‐soluble, star‐shaped macromolecular platform consisting of eight β‐cyclodextrin (β‐CD) units anchored to the narrower rim of a γ‐CD core through bis(triazolyl)alkyl spacers. The efficient synthetic protocol is based on the microwave (MW)‐promoted Cu‐catalyzed 1,3‐dipolar cycloaddition of CD monoazides to CD monoacetylenes. The ligand‐hosting capability of the construct has been assessed by relaxometric titration and nuclear magnetic relaxation dispersion (NMRD) profiling, which showed it to be good, and this was supported by molecular dynamics simulations. To demonstrate the feasibility of obtaining supramolecular structures with high hosting ability, we designed a dimeric platform, formed by joining two nonamers through the γ‐CD cores through a bis(lithocholic acid) linker. With a view to the potential biological applications, cytotoxicity and extent of binding to human serum albumin were assessed. The properties of this dendrimeric multicarrier make it suitable for pharmaceutical and diagnostic purposes, ranging from targeted drug delivery to molecular imaging.