枝晶簇四方相钛酸钡的制备及其电场响应性能的研究

为了提高BaTiO3粒子在含水复合弹性体中的电场响应能力,本文采用简单的水热合成法,在不引入任何表面活性剂的情况下,仅通过对反应温度和溶液pH值的调控获得了新颖形貌的钛酸钡粒子。通过借助X射线衍射(XRD)、拉曼光谱(Raman)、扫描电子显微镜(SEM)及接触角(Contact Angle)测量等手段对粒子的微观结构和表面特性进行表征发现:该粒子为高纯四方相枝晶簇结构,具有良好的亲水性,而且在含水复合弹性体中对电场具有优良的响应能力。     

Effect of Particle Size on Electro-Optic Properties of Liquid Crystal Devices Doped with γ-Cyclodextrin Stabilized Barium Titanate Nanoparticles

Barium titanate stabilized by γ-cyclodextrin nanoparticles were prepared by using a microwave reactor equipped with ultrasonic nozzle mixing at 240°C in a tetraethylene glycol solution of barium ethoxide and titanium ethoxide in the presence of γ-cyclodextrin. Particles in γ-cyclodextrin-stabilized BaTiO₃ nanoparticles had an average diameter of 2.1 nm and mainly distributed within the range of about 1 to 4 nm. The γ-cyclodextrin-stabilized BaTiO₃ nanoparticles were mixed with 4-cyano-4′-pentylbiphenyl at room temperature resulting in a liquid crystal sol of 4-cyano-4′-pentylbiphenyl. The response time of liquid crystal devices in the presence of γ-cyclodextrin-stabilized BaTiO₃ nanoparticles was faster than that in the absence.     

Work function and negative electron affinity of ultrathin barium fluoride films

Thin films of barium fluorides with different thicknesses were deposited on GaAs substrate by electron beam evaporation. The aim of the work was to identify the best growth conditions for the production of coatings with a low work function suitable for the anode of hybrid thermionic-photovoltaic (TIPV) devices. The chemical composition and work function φ of the films with different thicknesses were investigated by X-ray photoelectron spectroscopy (XPS) and ultraviolet photoelectron spectroscopy (UPS). The lowest value of φ = 2.1 eV was obtained for the film with a thickness of ~2 nm. In the valence band spectra of the films at low kinetic energy, near the cutoff, a characteristic peak of negative electron affinity was present. This effect contributed to a further reduction of the film's work function.     

Y3+/Li+和Y3+/Na+双掺杂氟化钡快响应闪烁晶体

氟化钡(BaF₂)晶体是已知响应最快的闪烁晶体,在高能物理、核物理及核医学等领域有着广泛的应用前景。抑制BaF₂晶体的慢发光成分对其工程应用至关重要。本文利用坩埚下降法制备了高Y³⁺掺杂浓度5%、8%、10%(摩尔分数)的BaF₂晶体,并采用Y³⁺与碱金属离子(Li⁺、Na⁺)共掺杂的方法形成电荷补偿阻止间隙F^-的产生,制备了双掺杂型BaF₂快响应闪烁晶体,进而基于优化的5 ns和2 500 ns时间门宽测试方法,研究了Y³⁺掺杂浓度以及Y³⁺与碱金属离子(Li⁺、Na⁺)共掺杂浓度对BaF₂闪烁晶体快/慢成分比的影响规律。结果表明,生长的高浓度Y³⁺掺杂BaF₂晶体的光学质量优异,在220 nm和300 nm处透过率分别高于90%和92%;随着Y³⁺掺杂浓度由0提高至10%,BaF₂晶体的慢发光成分显著降低,快/慢成分比由0.15提高至1.21;生长的Y³⁺/Li⁺及Y³⁺/Na⁺共掺杂BaF₂晶体的慢发光成分较Y³⁺掺杂BaF₂晶体进一步降低,快/慢成分比最高分别可达1.63和1.61。研制的双掺杂BaF₂快响应闪烁晶体有望应用于高能物理、核物理前沿实验等重要领域。     

65例贲门癌不同影像学检查的比较

目的：探讨贲门癌不同影像学检查的比较。方法：65例经病理证实的贲门癌患者全部行消化道造影,30例同时行CT检查,17例同时行MRI检查。结果：65例贲门癌表现为贲门区肿块影;CT示6例淋巴结转移,1例腹壁转移;MRI示11例淋巴结转移,4例肝脏转移。能清楚显示胃壁的多层影像MRI检查有88％（15／17）,而CT为37％（11／30）;MRI检查T分期的准确率为87％（13／15）。而CT为73％（8／11）。结论：钡剂造影是诊断贲门癌首选的影像学检查方法,CT和MRI是有效的补充,能做出较准确的肿瘤TNM分期,为临床治疗方案的制定提供重要的依据。但MRI对贲门癌术前分期的准确性高于CT。     

BaF2/La2O3催化剂上甲烷氧化偶联反应活性氧物种的原位红外光谱

用原位红外光谱研究了BaF2/La2O3催化剂上甲烷氧化偶联反应的活性氧物种.结果表明,催化剂经O2预吸附后,在1 108~1 118 cm-1处出现超氧物种O2-的O-O键伸缩振动峰.经18O2同位素交换实验后,原1 108~1 118 cm-1处谱峰的强度减弱,同时在1 086和1 051 cm-1处出现(O18O)-物种和18O2-物种的吸收峰.同位素交换实验进一步确证了1 108~1 118cm-1处谱峰确为O2-物种的吸收峰.在700℃下,O2-物种能够活化CH4生成C2H4,而且O2-物种的消耗量和C2H4的生成量呈很好的消长对应关系.超氧物种O2-是BaF2/La2O3催化剂上甲烷氧化偶联反应的活性氧物种.     

钡修饰Ir/SiO2催化剂对氨分解促进作用的研究

研究了浸渍法制备的Ba修饰S iO2担载型铱(Ir)基催化剂(Ba-Ir/S iO2)在氨催化分解模型反应的作用。结果表明Ba的添加显著提高了催化剂的活性和稳定性。采用H2-TPR和H2-TPD对Ba-Ir/SiO2进行分析和研究,结果显示助催化剂Ba和活性催化组分Ir之间发生了强相互作用。Ba-Ir/SiO2在氨催化分解模型反应中的主要活性物种是零价态的Ir。     

不同添加物和制备方式对Al2O3热稳定性的影响

通过水溶液成胶和丙三醇络事助成胶制备了不同的结构的γ－Ａｌ２Ｏ３,研究了Ｌａ,Ｓｉ,Ｂａ以及Ｌａ,Ｓｉ和Ｌａ,Ｂａ双组分改性对它们结构热稳定的作用,讨论了改性元素的引入方式及硅铝比的影响。结果表明,丙三醇络合助成胶能明显提高Ａｌ２Ｏ３的比表面积和孔径,并能显著改善Ａｌ２Ｏ３的热稳定性。