C_(1-x)M_x(M=Al,Si,x=0.1～0.3)复合材料的电化学嵌锂特性

用机械球磨法制备的C／Al、C／Si复合材料可作为镀离子电池的负极活性物质．研究结果表明，C_（0．7）Al_（0．3）和C_（0．8）Si_（0．2）（原子比）分别可以放出406mAh／g、和1039mAh／g的容量，远超过了原料碳的容量284mAh／g．经10次充放电循环、C_（0．7），Al_（0．3）放电容量衰退至251mAh／g．经20次充放电循环后C_（0．8）Si_（0．2）放电容量仍保持为749mAh／g．容量衰退主要是复合材料中包嵌入Al和Si部分容量衰退较快所致．     

无过渡圆角多边形孔的数控铣削方法

针对模具制造工件上有无过渡圆角的盲方孔、多边形孔不能用切削的方法加工的问题，经过对有代表性的方孔铣削工艺所进行的研究提出了在加工中心上采用专用的数控工具铣头，使主轴在作旋转的同时能与Ｘ，Ｙ两方向的伺服电机实现三轴联动来完成无过渡圆角多边形孔的数控铣削方法．     

反电势校正环在龙门刨床SCR控制系统中的应用

本文对龙门刨床可控硅逻辑无环流可逆系统换向过程中机械撞击的消除 ,提出了一个新的反电势校正软换向环节电路。能在保证机床性能的前提下 ,有效地消除撞击。并将其应用于B2 1 1 0B龙门刨铣床 ,取得了较好的效果。图 4,参 3。     

关于排球三人接发球的可行性研究

运用对比分析的方法，指出排球比赛五人、四人、二人接发球的诸多缺点，只有三人接发球才是目前最佳的接发球站位方法．并希望这一方法在排球比赛中能得到广泛的推广和应用．     

球磨机钢球充率的计算(续)

三、动态填充率的计算笔者认为,以往文献关于筒体横断面上球荷回转部分面积计算方法是正确的,而至于抛落部分与切面积 F_2的计算方法是值得商榷的.(一)回转部分切面积 F_1如图1所示,设半径为 r、增量为 dr 的环形微元面积为 d F_1,则由图1所示的几何关系知。     

Generalizing Mutational Equations for Uniqueness of Some Nonlocal 1st-Order Geometric Evolutions

The mutational equations of Aubin extend ordinary differential equations to metric spaces (with compact balls). In first-order geometric evolutions, however, the topological boundary need not be continuous in the sense of Painlevé–Kuratowski. So this paper suggests a generalization of Aubin’s mutational equations that extends classical notions of dynamical systems and functional analysis beyond the traditional border of vector spaces: Distribution-like solutions are introduced in a set just supplied with a countable family of (possibly non-symmetric) distance functions. Moreover their existence is proved by means of Euler approximations and a form of “weak” sequential compactness (although no continuous linear forms are available beyond topological vector spaces). This general framework is applied to a first-order geometric example, i.e. compact subsets of ℝ ^N evolving according to the nonlocal properties of both the current set and its proximal normal cones. Here neither regularity assumptions about the boundaries nor the inclusion principle are required. In particular, we specify sufficient conditions for the uniqueness of these solutions.      

圆锥螺旋铣刀的铣削力仿真

应用微分几何理论，给出了圆锥螺旋赞和何特性，据此导出了三维非线性铣削力模型，继而采用非线性规划识别切削力系数。     

Fly-wheel model exhibits the hither and thither motion of a bouncing ball

The to and fro motion of a bouncing ball on a flat surface is represented by a low-dimensional model. To describe the repeated reversals of the horizontal velocity of the ball, the elasticity of the ball has to be taken into account. We show that a simple fly-wheel model exhibits the observed hither and thither motion of elastic balls. The suggested model is capable of describing oblique impacts of spherical bodies, which can be important in many applications, including dynamical simulation of granular materials. We find that the behaviour of the bouncing fly-wheel is sensitive to the initial conditions, and the escape time plots are used to illustrate this observation.     

Erratum to: Characterization of the Unit Ball in C<Superscript><Emphasis Type="Italic">n</Emphasis></Superscript> Among Complex Manifolds of Dimension <Emphasis Type="Italic">n</Emphasis>

We correct the formulation of the main result in our earlier paper.      

新型螺栓球柱节点静力承载性能试验研究

在传统网架螺栓球节点的基础上,研发了一种可用于无檩网架的新型节点——螺栓球柱节点.进行了13个螺栓球柱节点的承载力试验.试验结果表明,螺栓球柱节点主要有圆柱筒壁压扁破坏、圆柱筒壁冲切破坏、螺栓拔出破坏、焊缝拉裂破坏等4种破坏模式;在压力和拉力荷载作用下,圆柱筒壁主要承受环向应力;设置加劲肋可以较大幅度地提高节点承载力和增强节点刚度.