钢球轧辊孔型设计咨询专家系统——BRES

本文介绍供钢球轧辊孔型设计初始参数选择的设计咨询专家系统BRES的设计思想、总体结构和功能,并讨论了该系统的知识库和推理机的构造技术。文中给出了BRES结合孔型优化CAD的设计应用实例,表明本系统能面向一般用户,在专家水平上进行复杂的斜轧钢球轧辊的螺旋孔型设计,为提高设计水平,缩短设计计算周期,推广斜轧零件工艺,提供了一个初步智能化的工具。     

浅谈排球正面上手传球教法

本文采用实验比较法,针对目前体育系学生的实际情况,对排球正面上手传球常规方法中的击球手型、击球点和全身协调用力三个主要环节的练习时间及练习次数等方面作了适当调整。使学生能较好、较快掌握适用正面上手传球技术,达到教学要求。     

滚珠丝杠副摩擦力矩影响因素的分析

滚珠丝杠副是数控设备中的一个重要元件,其摩擦力矩特性直接影响设备的动态性能.本文应用力学分析及几何分析的方法,建立了摩擦力矩的理论模型,分析了丝杠及螺母的螺纹半径误差、导程误差及滚道的形状误差等制造误差以及滚珠进出反向器时的冲击等因素对摩擦力矩的影响.     

球磨中B_2型FeAl的嵌镶碎化和长程有序度

研究了Ｂ２型金属间化合物 ＦｅＡｌ在机械球磨过程中的嵌镶碎块尺寸与长程有序度之间的关系。发现随球磨时间的增长，嵌镶碎块尺寸和长程有序度同时减小。由于嵌镶碎化主要由位错亚晶粒造成，应用Ｃｏｔｔｒｅｌｌ气团模型可建立嵌镶碎块尺寸与长程有序度之间的关系式。所得的这个关系式表明，长程有序度的降低主要是由位错与点阵原子的相互作用引起的。     

研磨条件对Ni_(50)Ti_(50)合金非晶化过程的影响

采用机械合金化方法将元素粉末制成Ni_(50)Ti_(50)非晶合金。X射线衍射用来跟踪非晶化进程,差热分析用来测定非晶的晶化结晶温度。实验结果表明,当采用15∶1的球料比和1.7～2.8m/s的研磨速度时能够获得典型的X射线衍射谱线。杂质铁每小时平均增加速率约为0.03%。差热分析测得的晶化结晶温度为530℃左右,但当加热时间为1h时,晶化结晶温度降至428℃左右,说明等温退火明显降低非晶的稳定性。     

四维复空间的超复数和单位球

利用克里复德式数在四维复空间中引入两类超复数。讨论两类复空间的几何性质,用四维球谐函数推导出单位园的体积及面积的计算公式。     

Milling of Organic Solids in a Jet Mill. Part 2: Checking the Validity of the Predicted Rate of Breakage Function

The particle size distribution of fine chemicals in the solid state, like active pharmaceutical ingredients, is often a critical parameter. To achieve the desired particle size distribution, milling of such materials is usually the method of choice. Since these chemicals are often scarcely available, experimental optimization of milling is not possible. Therefore, a model to predict the milling conditions has been developed. The model estimates the rate of breakage function, and needs mechanical properties like hardness and yield strength as input to calculate the rate of breakage function. This paper attempts to check the validity of the model by a series of experiments. A comparison of the experimental results with the outcomes of the model using five different model compounds has been performed. It appears that the rate of breakage function can be estimated by: The model is able to rank the compounds by degree of fracture as an effect of milling. It was also possible to perform a quantitative prediction of the impact of milling pressure on the milling behavior. Finally, it appeared that the prediction of the large particles in the distribution was significantly better than small ones. Because the oversized material is usually the most critical parameter, the conclusion is that the model has acceptable practical applicability.     

A Littlewood-Paley type inequality

In this note we prove the following theorem: Let u be a harmonic function in the unit ball and . Then there is a constant C = C(p, n) such that

基于绿色设计准则的塑料门窗铣削机设计

介绍了绿色设计在技术先进性,环境、材料和结构等方面的准则,并运用于塑窗锯铣加工中心的铣削机设计中,表明绿色设计可从技术上保证安全,可靠,经济地实现产品的各项功能和性能,同时只有在设计阶段将产品的“绿色度”作为设计目标,才能取得理想的设计结果。     

旋转球的动力学分析

角球在飞进中产生了两种压差阻力,在其合力的作用下,球体被迫改变了正常的轨道,从而形成了“香蕉形”的轨迹。