原子荧光光谱法测定固体废弃物——氧化皮中的砷

建立了固体废弃物——氧化皮中砷的测定方法。氧化皮粉末样品经盐酸溶解,在溶液中添加硫脲和抗坏血酸预还原砷,以盐酸(2+98)为载流,硼氢化钠(10g/L)和氢氧化钾(5g/L)混合溶液为还原剂,砷与硼氢化钠、盐酸反应生成砷化氢,砷化氢利用氩气导入石英炉原子化器中原子化,以空心阴极灯为激发光源,测量砷产生的荧光强度。测试氧化皮中砷含量的相对标准偏差为不大于4.8%,检出限为0.12μg/L,回收率为97%～103%,结果准确度较好。方法具有试剂消耗少、快速、检出限低的优点。     

Application of Ball Milling Technology to Carbohydrate Reactions: I. Regioselective Primary Hydroxyl Protection of Hexosides and Nucleoside by Planetary Ball Milling‡

Dry ball milling of hexosides with trityl chloride in the presence of DABCO or Na₂CO₃ has been found to result in their complete conversion to the respective 6‐O‐trityl ethers. Further wet grinding of the reaction mixture with Ac₂O in the presence of DMAP led to the respective fully protected hexosides in good to excellent yields after isolation. It has been found to be an effective one‐pot two‐step synthesis under solvent‐free condition. The speed of homogenization has been shown to highly influence the rate and outcome of the reaction, and commercially available planetary ball mill has been proved to be very convenient for carrying out the reaction under standardized and reproducible conditions.     

Enhancing the enzymatic hydrolysis of cellulosic materials using simultaneous ball milling

One of the limiting factors restricting the effective and efficient bioconversion of softwood-derived lignocellulosic residues is the recalcitrance of the substrate following pretreatment. Consequently, the ensuing enzymatic process requires relatively high enzyme loadings to produce monomeric carbohydrates that are readily fermentable by ethanologenic microorganisms. In an attempt to circumvent the need for larger enzyme loadings, a simultaneous physical and enzymatic hydrolysis treatment was evaluated. A ball-mill reactor was used as the digestion vessel, and the extent and rate of hydrolysis were monitored. Concurrently, enzyme adsorption profiles and the rate of conversion during the course of hydrolysis were monitored. α-Cellulose, employed as a model substrate, and SO₂-impregnated steam-exploded Douglas-fir wood chips were assessed as the cellulosic substrates. The softwood-derived substrate was further posttreated with water and hot alkaline hydrogen peroxide to remove >90% of the original lignin. Experiments at different reaction conditions were evaluated, including substrate concentration, enzyme loading, reaction volumes, and number of ball beads employed during mechanical milling. It was apparent that the best conditions for the enzymatic hydrolysis of α-cellulose were attained using a higher number of beads, while the presence of air-liquid interface did not seem to affect the rate of saccharification. Similarly, when employing the lignocellulosic substrate, up to 100% hydrolysis could be achieved with a minimum enzyme loading (10 filter paper units/g of cellulose), at lower substrate concentrations and with a greater number of reaction beads during milling. It was apparent that the combined strategy of simultaneous ball milling and enzymatic hydrolysis could improve the rate of saccharification and/or reduce the enzyme loading required to attain total hydrolysis of the carbohydrate moieties.     

Characterization of sugar juice heat exchanger tube deposit

Fouling of heat exchanger surfaces during sugar manufacture reduces productivity and increases energy demand. This study characterizes a deposit (including its internal structure) formed in a sugar factory's evaporator unit using a variety of X‐ray diffraction and scanning electron microscopy techniques (including X‐ray powder diffraction, X‐ray fluorescence, elemental mapping with energy dispersive spectroscopy and backscattered electron imaging). Calcium sulfate dihydrate, calcium oxalate mono‐ and dihydrate, hydroxyapatite, amorphous silica and organic matter are present in the deposit. The composition of the deposit (which contains three layers) varies along the height of the tube. There are noticeable differences in the composition and porosity among the layers in the deposit. A porous structure consisting of a mixture of amorphous silica, calcium oxalate dihydrate and organic matter is attached to the surface of the deposit in contact with sugar juice, while a denser morphology of amorphous silica and hydroxyapatite is attached to the tube wall. Elemental mapping identifies an association between Si, Al, Mg, Fe and O, suggesting the presence of a silicate compound as a minor component in the deposit. An attempt is made to rationalize the formation of the observed phases. Copyright © 2010 John Wiley & Sons, Ltd.     

Biosynthesis and characterization of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) copolymer from wild-type Comamonas sp. EB172

Poly(3-hydroxybutyrate) [P(3HB)] homopolymer and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [P(3HB-co-3HV)] copolymer was produced by Comamonas sp. EB172 using single and mixture of carbon sources. Poly(3-hydroxyvalerate) P(3HV) incorporation in the copolymer was obtained when propionic and valeric acid was used as precursors. Incorporation of 3HV fractions in the copolymer varied from 45 to 86 mol% when initial pH of the medium was regulated. In fed-batch cultivation, organic acids derived from anaerobically treated palm oil mill effluent (POME) were shown to be suitable carbon sources for polyhydroxyalkanoate (PHA) production by Comamonas sp. EB172. Number average molecular weight (M_n) produced by the strain was in the range of 153-412 kDa with polydispersity index (M_w/M_n) in the range of 2.2-2.6, respectively. Incorporation of higher 3HV units improved the thermal stability of P(3HB-co-3HV) copolymer. Thus the newly isolated bacterium Comamonas sp. EB172 is a suitable candidate for PHA production using POME as renewable and alternative cheap raw materials.     

Benign‐by‐Design Solventless Mechanochemical Synthesis of Three‐, Two‐, and One‐Dimensional Hybrid Perovskites

Organic–inorganic hybrid perovskites have attracted significant attention owing to their extraordinary optoelectronic properties with applications in the fields of solar energy, lighting, photodetectors, and lasers. The rational design of these hybrid materials is a key factor in the optimization of their performance in perovskite‐based devices. Herein, a mechanochemical approach is proposed as a highly efficient, simple, and reproducible method for the preparation of four types of hybrid perovskites, which were obtained in large amounts as polycrystalline powders with high purity and excellent optoelectronics properties. Two archetypal three‐dimensional (3D) perovskites (MAPbI₃ and FAPbI₃) were synthesized, together with a bidimensional (2D) perovskite (Gua₂PbI₄) and a “double‐chain” one‐dimensional (1D) perovskite (GuaPbI₃), whose structure was elucidated by X‐ray diffraction.     

Mg／Mgl．8La0．2Ni纳米复合材料的吸放氢性能研究

应用高能球磨法制备Mg-x％Mg1.8La0.2Ni（x=10、20和30）纳米复合储氢材料．X射线衍射（XRD）、透射电镜（TEM）和选区电子衍射（SAED）测试表明，该复合材料具有纳米晶和非晶态混合结构的性质，吸氢温度降低，较好的吸放氢动力学性能，在423K，2．5MPa氢压的条件下，50s内即可达到最大吸氢量．     

水热法制备锂电池Si@C负极材料的工艺优化研究

水热法是广泛应用于锂离子电池Si@C电极材料的一种制备方法,其反应条件是影响产物最终形貌和性能的重要因素, 采取最佳的反应工艺可以大大提升材料的电化学性能。本研究中, 使用葡萄糖作为碳源, 光伏切割废料硅为硅源, 探究了水热法制备核壳结构Si@C电极材料的最优工艺, 分别研究了温度、 原料浓度、 反应时间和原料比例对产物的形貌、 性能的影响以及相互之间的关系, 并得到最佳反应条件。在该条件下(葡萄糖浓度为0.5 mol·L^-1, 硅与葡萄糖重量比为0.3:1, 反应温度190 ^oC, 反应时间9 h), 得到了包覆完整、 粒径适中的Si@C电极材料(CS190-3), 对以该样品为负极的扣式半电池进行电化学测试, 在655 mA·g^-1的电流密度下, 其首圈放电比容量为3369.5 mAh·g^-1, 经过500次循环剩余容量为1405.0 mAh·g^-1。倍率测试中, 在6550 mA·g^-1的电流密度下,其剩余容量为937.1 mAh·g^-1,当电流密度恢复至655 mA·g^-1时,电池放电比容量仍可恢复至1683.0 mAh·g^-1。     

Solvent-Free Synthesis of Core-Functionalised Naphthalene Diimides by Using a Vibratory Ball Mill: Suzuki,Sonogashira and Buchwald–Hartwig Reactions

Solvent-free synthesis by using a vibratory ball mill (VBM) offers the chance to access new chemical reactivity, whilst reducing solvent waste and minimising reaction times. Herein, we report the core functionalisation of N,N’-bis(2-ethylhexyl)-2,6-dibromo-1,4,5,8-naphthalenetetracarboxylic acid (Br₂-NDI) by using Suzuki, Sonogashira and Buchwald–Hartwig coupling reactions. The products of these reactions are important building blocks in many areas of organic electronics including organic light-emitting diodes (OLEDs), organic field-effect transistors (OFETs) and organic photovoltaic cells (OPVCs). The reactions proceed in as little as 1 h, use commercially available palladium sources (frequently Pd(OAc)₂) and are tolerant to air and atmospheric moisture. Furthermore, the real-world potential of this green VBM protocol is demonstrated by the double Suzuki coupling of a monobromo(NDI) residue to a bis(thiophene) pinacol ester. The resulting dimeric NDI species has been demonstrated to behave as an electron acceptor in functioning OPVCs.     

现代分析仪器在高中化学教学中的应用*——以“防晒霜的防晒效果实验探究”为例

从高中化学原子、分子等抽象性的知识教学出发,以防晒霜的防晒效果实验探究为例,探讨了现代分析仪器在高中化学教学中的应用。通过利用现代分析仪器紫外可见分光光度计,结合紫外线变色球实验探究防晒霜的防晒效果,分析并认识防晒霜中化学防晒的机理。结果表明,防晒霜的厚度越大、SPF越高,防晒霜的防晒效果越好,并且防晒霜的防晒效果可以持续一段时间,但是不同类型的防晒产品存在一定差异。在化学教学中渗透现代分析仪器的应用,为学生进一步了解化学学科在改变学习方式、拓宽学科知识领域、推动自身全面与可持续发展方面打下坚实的基础。