���ܶȵ�������ģ�������˲��������

用高密度等离子体模型可以计算出一整套输运参数,并且在很宽的等离子体温度和密度范围内有合理的精度,可广泛应用于Z箍缩等离子体、激光聚变和磁约束聚变等领域,并将这个模型计算出的各种输运参数拟合成了实用的公式。     

Spherical dye-doped silica particles

Organic dyes such as water soluble porphyrins were incorporated into monodispersed SiO₂ particles using the sol-gel technique (the Stober synthesis) and their monomeric and dimeric properties were investigated by aiming at the microcavity effect. Doping efficiencies of dyes into SiO₂ particles depended on dye's hydrophilic properties. The doping efficiency of a porphyrin, TTMAPP, decreased with increasing the nominal content in the starting solution and the doping content showed the maximum value of 1.6×10^–5 mol/g SiO₂. With increasing the TTMAPP content, spectra of doped particles were changed from dimeric to monomeric nature; the absorption peak due to dimers disappeared and halfwidth of absorption at Soret band decreased. This unusual change was caused by the decrease of particle sizes by dye doping. The TTMAPP-doped sample having monomeric spectrum showed the fluorescence life time of 8.5 nsec and photochemical hole burning at about 5 K.     

建筑卷扬机卷筒端侧板强度的理论分析与试验研究

本文依据理论分析、光弹性试验、电测试验并经数学拟合,建立了卷扬机卷筒端侧板强度计算公式.     

Influence of Particle Morphology and Flow Conditions on the Dispersion Behavior of Fumed Silica in Silicone Polymers

The dispersion behavior of agglomerates of several grades of fumed silica in poly(dimethyl siloxane) liquids has been studied as a function of particle morphology and applied flow conditions. The effects of primary particle size and aggregate density and structure on cohesivity were probed through tensile and shear strength tests on particle compacts. These cohesivity tests indicated that the shear strength of particle compacts was two orders of magnitude higher than the tensile strength at the same overall packing density. Experiments carried out in both steady and time‐varying simple‐shear flows indicate that dispersion occurs through tensile failure. In the steady‐shear experiments,enhanced dispersion was obtained at higher levels of applied stress and, at comparable levels of applied stress, dispersion was found to proceed faster at higher shear rates. Experiments conducted in time‐varying flows further corroborated the results obtained in tensile cohesivity tests. Experiments in which the mean and maximum stresses in the time‐varying flows were matched to the stresses produced in steady shear flows highlight the influence of flow dynamics on dispersion behavior.     

结构可靠性设计中尺寸变差系数的确定方法

提出了在结构可靠性设计中,根据现有加工条件和设计要求确定几何尺寸变差系数的思想,并给出了当已知精度等级时,直接加工尺寸和组合尺寸变差系数的计算方法和程序。采用该方法使可靠性设计更切合实际。     

Modification to the Fringe Component of Diffraction Coefficient in TD-EEC Method

A modified formulation for fringe component of diffraction coefficient is implemented to TD-EEC method. An example of diffraction by perfectly conducting plate is used to illustrate our scheme. Comparing with the FDTD results we observe that the improved expression for fringe component is more accurate than that of Michaeli's formulation. This high frequency time domain technique is available for treating the bistatic scattering problems for millimeter waves.     

系统的分散与集中的决策：（Ⅱ）分散控制效果分析

分散集中系统是一种重要的工业过程控制系统．合适的分散度有利于提高系统的性能指标，尤其是动态响应速度和误差时间的积分值都有明显地改善．文中提出若干系统分散的选择原则，并用仿真和理论分析加以证明．     

沿非线性界面传输的TM波传播常数的解析解

本文得到了沿一线性介质与非线性介质界面传输的ＴＭ波精确的色散关系和传播常数的解析计算公式，导出了计算非线性介质中传输功率流的积分公式。本文方法计算传播常数及功率流的优点是可不必先知道电场分布。     

Measurements and simulations of particle dispersion in a turbulent flow

A particle imaging technique has been used to collect droplet displacement statistics in a round turbulent jet of air. Droplets are injected on the jet axis, and a laser sheet and position-sensitive photomultiplier tube are used to track their radial displacement and time-of-flight. Dispersion statistics can be computed which are Lagrangian or Eulerian in nature. The experiments have been simulated numerically using a second-order closure scheme for the jet and a stochastic simulation for the particle trajectories. Results are presented for non-vaporizing droplets of sizes from 35 to 160 μm. The simulations have underscored the importance of initial conditions and early droplet displacement history on the droplet trajectory for droplets with large inertia relative to the turbulence. Estimates of initial conditions have been made and their effect on dispersion is quantified.     

降低工业锅炉初始排尘浓度的对策

通过工业锅炉试验，分析研究了锅炉燃烧方式、煤种、锅炉负荷、过剩空气系数及运行操作等几种对工业锅炉初始排尘浓度有重要影响的因素，并有针对性地提出了一些能有效降低工业锅炉初始排尘浓度的方法和措施。