Experience Gained Using Second-Moment Closure Modeling for Transitional Flows Due to Boundary Layer Separation

This paper presents detailed information on the experience gained during the attempts to model a set of transitional flows due to boundary layer separation. These flows are developed on a flat plate with a semi-circular leading edge and they have been coded by the ERCOFTAC Special Interest Group on Transition, as T3L flows. Different freestream velocities and turbulence intensities configure these transitional flows and, by consequence, govern the transition mechanism, resulting in larger or smaller transitional regions. The modeling of the T3L flows has been performed by adopting a low-Reynolds number second-moment closure turbulence model. The results showed satisfactory agreement with the experimental measurements, although some difficulties regarding successful convergence have been faced. The final conclusion is that turbulence modeling can present quite accurate results for transitional flows without any additional use of ad-hoc modifications or additional equations based on various transition models and intermittency transport modeling.     

基于特征造型的注塑件CAD/CAE研究

以某电器零件的特征造型与注塑分析模拟为例，介绍了Pro/Engineer的特点以及在注塑件产品开发中的应用。     

用VBA实现Auto CAD2002参数化三维造型设计

对参数化绘图的基本原理进行分析,介绍AutoCAD2002环境下运用VBA(VisualBa sicApplication)编程实现参数绘图的方法,实现了对渐开线圆柱齿轮三维造型设计的参数化。     

Towards understanding the increase in strength of thermotropic polyesters with heat treatment

Thermotropic copolyester fibers of oxynaphthoate and oxybenzoate have been subjected to conditions that promote solid-state polymerization as well as annealing. The annealing process causes the crystals to perfect with a simultaneous increase in heat of fusion and melting temperature. Solid-state polymerization, a reaction rate-controlled process, causes the polymer viscosity average molecular weight to increase by chain extension from about 14,000 g/mole to more than 87,000 g/mole with a simultaneous impressive increase in tenacity from about 10 g/d (1.2 GPa) to almost 30 g/d (3.7 GPa). To understand the changes in mechanical properties, we have modeled the fiber structure as short rod-like molecules poorly bonded to a continuous matrix of parallel molecules. Lengthening of the reinforcing molecules facilitates better transfer of load from matrix to molecules, resulting in higher tenacity fibers. © 1994 John Wiley & Sons, Inc.     

单片机在交流电梯控制系统的应用

本文介绍使用单片机代替交流电梯控制系统中传统使用的继电器控制系统,实现了对层呼信号或指令信号登记、自动定时关门(门联锁)、自动检测定向、顺向载车、停站和自动开门……等十多种功能,提高了运行的平稳可靠、灵活、平层准确以及可调速度、方便维修保养等有关性能.     

基于ASP技术对网上作文栏目的信息管理

通过ASP与HTML页、脚本命令和ActiveX组件组合,创建交互的Web页的应用程序,实现了网上作文栏目管理.     

Deactivation reactions in the modeled 2,2,6,6‐tetramethyl‐1‐piperidinyloxy‐mediated free‐radical polymerization of styrene: A comparative study with the 2,2,6,6‐tetramethyl‐1‐piperidinyloxy/acrylonitrile system

The competitiveness of the combination and disproportionation reactions between a 1‐phenylpropyl radical, standing for a growing polystyryl macroradical, and a 2,2,6,6‐tetramethyl‐1‐piperidinyloxy (TEMPO) radical in the nitroxide‐mediated free‐radical polymerization of styrene was quantitatively evaluated by the study of the transition geometry and the potential energy profiles for the competing reactions with the use of quantum‐mechanical calculations at the density functional theory (DFT) UB3‐LYP/6‐311+G(3df, 2p)//(unrestricted) Austin Model 1 level of theory. The search for transition geometries resulted in six and two transition structures for the radical combination and disproportionation reactions, respectively. The former transition structures, mainly differing in the out‐of‐plane angle of the N? O bond in the transition structure TEMPO molecule, were correlated with the activation energy, which was determined to be in the range of 8.4–19.4 kcal mol^?1 from a single‐point calculation at the DFT UB3‐LYP/6‐311+G(3df, 2p)//unrestricted Austin Model 1 level. The calculated activation energy for the disproportionation reaction was less favorable by a value of more than 30 kcal mol^?1 in comparison with that for the combination reaction. The approximate barrier difference for the TEMPO addition and disproportionation reaction was slightly smaller for the styrene polymerization system than for the acrylonitrile polymerization system, thus indicating that a β‐proton abstraction through a TEMPO radical from the polymer backbone could diminish control over the radical polymerization of styrene with the nitroxide even more than in the latter system. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 232–241, 2007     

Implementation and experimental study on fast object modeling based on multiple structured stripes

In this paper, a practical structured light-based system for fast object modeling and reconstruction is reported. The system consists of an off-the-shelf digital projector, a video camera and a turntable. The system calibration is implemented accurately and automatically by taking a single image of an illuminated calibration template. The multiple color light stripes emitted by the projector adopt only three colors and the color can be modified easily according to the surface texture of the object. This makes the system widely applicable in many situations, and the assumption about color neutrality, which is a limitation to other similar systems, can be largely relaxed. The registration and merging algorithm is greatly simplified by employing a turntable. The validity and high accuracy of the method are demonstrated by extensive real experiments.     

数学建模与素质教育

面对二十一世纪知识经济的挑战 ,我国高等教育模式应由应试教育 ,专业教育向素质教育转变 ,培养学生自主意识 ,效率意识 ,竞争意识 ,创新意识和民主意识 ,即高校教育应重视大学生的创新能力、实践能力和创业精神 ,普遍提高大学生的人文素质和科学素质 .本文拟就提高大学生素质的有效层面 ,对开展数学建模教学与实践进行深入分析 ,以窥探数学建模与素质教育之关系 .在深入把握数学建模教学与实践内涵的同时 ,分析得出这种以不打扰现行正常秩序的教育是提高大学生素质的有效途径之一     

中国民间美术在高校美术教育中的地位和作用

阐述了民间美术是中华民族文化的重要组成部分,也是高校美术教学内容之一,指出应以弘扬民族文化、保护和研究中国民间美术为宗旨,确保民间美术在高校的地位和作用。