乳化法—火焰原子吸收光谱法测定奶粉中的锌

用乳化剂ＯＰ将奶粉乳化成稳定的乳浊液，喷入空气－乙炔火焰中，以标准加入法测定锌，测定结果与灰化法一致，方法简便，准确。     

氨基羧酸纤维分离富集-电感耦合等离子体原子发射光谱法测定多种痕量稀土元素

本文制备了氨基羧酸纤维滤纸片作为柱填充物，成功地分离和富集了地化样品中的多种稀土元素。富集后的稀土元素采用电感耦合等离子体原子发射光谱法测定，回收率为90％～109％。本文还对基体干扰及其消除进行了研究。     

Temperature Development of Homo- and Hetero-Clustering in Saturated Vapors

Computational findings of temperature increase of clustering degree in saturated vapors are analyzed. A thermodynamic proof is presented and a simple criterion derived. Illustrations are based on saturated steam, magnesium and carbon vapor. The results are applicable to synthesis of fullerenes, metallofullerenes, and heterofullerenes, chemical vapor deposition technique, or atmospheric chemistry.     

Feasibility of using solid sampling graphite furnace atomic absorption spectrometry for speciation analysis of volatile and non-volatile compounds of nickel and vanadium in crude oil

A method for the direct determination of volatile and non-volatile nickel and vanadium compounds in crude oil without previous treatment using direct solid sampling graphite furnace atomic absorption spectrometry is proposed. The crude oil samples were weighed directly onto solid sampling platforms using a microbalance and introduced into a transversely heated solid sampling graphite tube. In previous work of our group losses of volatile nickel and vanadium compounds have been detected, whereas other nickel and vanadium compounds were thermally stable up to 1300 and 1600 °C, respectively. In order to avoid this problem different chemical modifiers (conventional and permanent) have been investigated. With 400 μg of iridium as permanent modifier, the signal started to drop already after two atomization cycles, possibly because of an interaction of nickel (which is a catalyst poison) with iridium. Twenty micrograms of palladium applied in each determination was found to be optimum for both elements. The palladium was deposited on the platform and submitted to a drying step at 150 °C for 75 s. After that the sample was added onto the platform and submitted to the furnace program. The influence of sample mass on the linearity of the response and on potential measurement errors was also investigated using four samples with different nickel content. For the sample with the lowest nickel concentration the relationship between mass and integrated absorbance was found to be non-linear when a high sample mass was introduced. It was suspected that the modifier had not covered the entire platform surface, which resulted in analyte losses. This problem could be avoided by using 40 μL of 0.5 g L⁻¹ Pd with 0.05% Triton X-100. Calibration curves were established with and without modifier, with aqueous standards, oil-in-water emulsions and the certified reference material NIST SRM 1634c (trace metals in residual fuel oil). The sensitivity for aqueous standards and emulsions was close to that for SRM 1634c, making possible the use of aqueous standards for calibration. The limits of detection and quantification obtained for nickel and vanadium under this condition were found to be 0.02 and 0.06 μg g⁻¹, respectively, for both elements, based on 10 mg of sample. Nickel and vanadium were determined in the samples with (total Ni and V) and without the use of Pd (thermally stable compounds), and the concentration of volatile compounds was calculated by difference. The results were compared with those obtained by high-resolution continuum source graphite furnace atomic absorption spectrometry by emulsion technique; no significant differences were found for total Ni and V at the 95% confidence level according to a Student's t-test.     

Tetra- and hexaatomic cyclic clusters of main-group elements (XY)2 and (XY)3: an ab initio and density functional study

The electronic and molecular structure of planar (cyclic and linear) tetra- and hexaatomic clusters (XY) _n (XY = CC, BN, BeO, LiF; n = 2, 3) was studied using the ab initio CCD(full)/6-311+G** method and density functional approach (B3LYP/6-311+G**). The stability of cyclic clusters C₆, B₃N₃, and Be₃O₃ with D_3h symmetry is mainly determined by the aromaticity of their -electron systems.     

Direct analysis of fly ash materials by inductively coupled plasma atomic emission spectrometry using slurry nebulization

Fly ash samples of cement works were analysed using slurry nebulization inductively coupled plasma atomic emission spectrometric (ICP-AES). Because of the influence of the experimental factors on the signal intensity, the optimal conditions of the analysis circumstances were determined. Control analyses (wet digestion followed by ICP-AES, and XRF of dry powders (pressed pellets)) were also carried out to compare the results. Based on the result, it was concluded that the slurry nebulization method using slurry standard of same type reference material for calibration can be applied for rapid but less precise (RSD 5–10%) determination of the elements in fly ash.     

毛细管电泳-电感耦合等离子体原子发射光谱法对田七提取液中Fe、Cu和Mg存在状态的研究

提出了以水作溶剂微波萃取提取,并以毛细管电泳电感耦合等离子体原子发射光谱(CE-ICP-AES)法测定田七提取液中Mg、Cu和Fe的形态的分析方法。实验结果表明:Mg仅以游离态存在;而Cu和Fe除了游离态以外,还存在其它三种未知的形态。此外,还测定了田七中20个微量元素的总含量,并得到了上述待测元素在水提取液中的提取率。     

金汞齐富集冷原子荧光测汞法的研究

本文介绍了一种用于测定汞的金汞齐富集热解系统。研究了该系统与冷原子荧光测汞仪联用的工作条件和干扰,在最佳条件下的检出下限为4×10~(-13)克汞,分析周期3分钟,相对标准偏差2.5%(1.5×10~(-9)克汞)。     

白血病骨髓移植病人全血微量元素铜的变化及其意义

为了研究白血病骨髓移植病人全血微量元素铜的变化及其意义 ,用原子吸收光谱法检测了正常对照组与白血病骨髓移植患者预处理前及移植后骨髓空虚期全血微量元素铜的含量。结果表明 ,正常对照组全血铜浓度与白血病骨髓移植患者预处理前全血铜浓度差异无显著性 (P >0 0 5 ) ,而与骨髓空虚期全血铜浓度有显著性差异 (P <0 0 5 ) ,说明白血病缓解后血铜接近正常对照组水平 ,而白血病骨髓移植患者预处理后骨髓空虚期全血铜含量高于正常对照组 ,说明预处理影响微量元素铜的代谢 ,本文就其影响机理进行了研究