3,6-二氯哒嗪-金鸡纳生物碱衍生物催化不对称“中断的”Feist-Bénary反应的研究

将3,6-二氯哒嗪-金鸡纳生物碱衍生物用于催化β-二羰基化合物与溴乙酰甲酸乙酯/β-取代的溴乙酰甲酸乙酯的不对称“中断的”Feist-Bénary反应, 得到了较高的化学产率(72%～97%)和最高达93% ee的立体选择性.     

胺甲基化聚丙烯酰胺阳离子交换剂的合成与表征

采用反相悬浮聚合法合成20%交联度的聚丙烯酰膀(Polyacrylamide,PAM)树脂,经过Mannich反应修饰(nacrylamide:nformaldehyde:ndimethylamine=1:1:1.2)得到高亲水性弱碱性阴离子交换剂氨甲基化聚丙烯酰胺(Aminomcthylated Polyacrylamide,APAM).随着修饰反应时间的增加,得到的APAM的弱碱交换量与蛋白质吸附量增加,在选定的实验条件下,确定Mannich反应时间以1h为宜,所得树脂对牛血清白蛋白吸附量达到433mg/g,过长的反应时间导致树脂结构有一定程度的破坏.树脂对蛋白质的吸附等温线符合Langmuir方程,实际分离牛血清白蛋白和血红蛋白效果较好,柱体积不随洗脱液中盐浓度的增加而变化.     

Molecular beacons: a real-time polymerase chain reaction assay for detecting Escherichia coli from fresh produce and water

Molecular beacons (MBs) are oligonucleotide probes that fluoresce upon hybridization. The development of a real-time polymerase chain reaction (PCR) assay to detect the presence of Escherichia coli using these fluorogenic reporter molecules is reported. MBs were designed to recognize a 19-bp region of the uid A gene, coding for an enzyme β-glucuronidase. The specificity of the MB-based PCR assay was evaluated for various E. coli strains as well as bacteria species that are present in nature. The capability of the assay to detect E. coli in drinking water and produce was demonstrated. Positive detection of E. coli was demonstrated when >10¹ CFU mL⁻¹ (colony forming unit) was present in the water samples and fresh produce after 18 h of enrichment. These assays could be carried out entirely in sealed PCR tubes, enabling rapid and semiautomated detection of E. coli in food and environmental samples.     

对甲氧基苯胺与丙烯腈的催化加成

对甲氧基-N,N-二氰乙基苯胺是一种重要的有机中间体,可由对甲氧基苯胺与丙烯腈在酸的催化下发生加成反应而得。然而芳胺与丙烯腈发生的加成反应较难进行,采用HAc,FeC l3,CuC l2,Cu2C l2,ZnC l2,蒙脱土,Cu(Ac)2·3H2O作催化剂得到的主要为单氰乙基物[1-4]。赵莹[5-10]报道了用A     

Cyclic welding behavior of covalent adaptable network polymers

Surface welding effect of covalent adaptable network (CAN) polymers enables self‐healing, reprocessing and recycling of thermosets, but little is known about their welding behaviors during repeated welding‐peeling cycles. In this article, we study the cyclic welding effect of an epoxy based thermal‐sensitive CAN. Surface roughness is generated by rubbing the sample on sandpapers with different grid sizes. The welding‐peeling cycles are repeated on the same pair of samples for five times, with roughness amplitude and interfacial fracture energy measured in each cycle. It is shown that the roughness gradually decreases during the repeated welding cycles, especially when a long welding time or high welding pressure is applied. Even though lower roughness amplitude promotes the contact area, the interfacial fracture energy reduces due to the increased BER activation energy after long‐time heating. A multiscale constitutive model is adopted, where we incorporate an explicit expression of interfacial contact area as a function of root‐mean‐square roughness parameter. The model is able to capture the evolving interfacial fracture energy during repeated welding cycles by using the measured roughness parameter, network modulus and BER activation energy. The study provides theoretical basis for the design and applications of CANs involving cyclic welding‐peeling operations. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 402–413.     

钯（0）／离子交换树脂对有机锡试剂和有机卤化物偶联反应的催化性能和结构表征

制备了强碱性阴离子交换树脂（）负载钯（０）催化剂，发现它对有机锡试剂和有机卤化物的偶联反应有很高的催化活性，分离容易，可重复使用．起催化作用的是金属态把．ＸＰＳ等实验结果表明，在催化剂中钯作为桥将功能基－Ｎ（ＣＨ３）３与ＯＨ－联结起来．催化剂中的把可以看作是两配位的和配位不饱和的，经过氧化加成、金属交换、还原消除过程完成催化反应．     

模式识别—人工神经网络在化学中的若干新应用

本文通过我们应用模式识别－人工神经网络方法预报新化合物、熔盐相图以及复杂化学反应体系的研究，展示应用模式识别－人工神经网络方法与物理化学理论相结合，研究化学现象的可能性和应用价值。     

One step synthesis of Fe4.4Ni17.6Se16 coupled NiSe foam as self-supported,highly efficient and durable oxygen evolution electrode

The development of cost-effective, durable and high-efficient oxygen evolution reaction (OER) electrocatalysts is an extremely critical technology for the large-scale industrial water electrolysis. Here, a new strategy is proposed to significantly enhance the electrocatalytic activity by forming a hybrid electrode of NiSe and Fe_4.4Ni_17.6Se₁₆ through direct selenization of porous iron-nickel (FeNi) alloy foam via thermal selenization process. The obtained self-supported Fe_4.4Ni_17.6Se₁₆/NiSe hybrid (FNS/NiSe) foam displays outstanding durability and remarkable catalytic activity in 1.0 M KOH with low overpotentials of 242 and 282 mV to achieve the current densities of 100 and 500 mA cm^?2, respectively. To the best of our knowledge, it exceeds most of the reported OER electrocatalysts in alkaline electrolytes.     

Oxygen anion (O−) and hydroxide anion (HO−) reactivity with a series of old and new refrigerants

The reactivity of a series of commonly used halogenated compounds (trihalomethanes, chlorofluorocarbon, hydrochlorofluorocarbon, fluorocarbons, and hydrofluoroolefin) with hydroxide and oxygen anion is studied in a compact Fourier transform ion cyclotron resonance. O⁻ is formed by dissociative electron attachment to N₂O and HO⁻ by a further ion‐molecule reaction with ammonia. Kinetic experiments are performed by increasing duration of introduction of the studied molecule at a constant pressure. Hydroxide anion reactions mainly proceed by proton transfer for all the acidic compounds. However, nucleophilic substitution is observed for chlorinated and brominated compounds. For fluorinated compounds, a specific elimination of a neutral fluorinated alkene is observed in our results in parallel with the proton transfer reaction. Oxygen anion reacts rapidly and extensively with all compounds. Main reaction channels result from nucleophilic substitution, proton transfer, and formal H₂⁺ transfer. We highlight the importance of transfer processes (atom or ion) in the intermediate ion‐neutral complex, explaining part of the observed reactivity and formed ions. In this paper, we present the first reactivity study of anions with HFO 1234yf. Finally, the potential of O⁻ and HO⁻ as chemical ionization reagents for trace analysis is discussed.     

Application of image analysis technique for the determination of thiophanate methyl by thin-layer chromatography

A simple and convenient thin-layer chromatography (TLC) method combined with image analysis technique was developed to determine thiophanate methyl. The detection of pesticide was based on iodine–azide reaction. Digital images of TLC plate chromatograms were analysed using TLSee software, and quantitative analysis was conducted. The linearity (0.3–3.0 µg per spot), sensitivity, accuracy and precision of the system were investigated.