固体超强酸SO_4~(2-)/SiO_2-TiO_2催化合成异维生素C钠

在异维生素C钠(D-VcNa)的合成过程中,以SO42-/S iO2-TiO2复合固体超强酸作为酯化反应催化剂,2-酮基-D-葡萄糖酸(2-KGA)和甲醇为原料,采用精馏脱水酯化工艺,不断除去酯化过程中产生的水。催化剂的最佳焙烧温度为550℃,催化剂用量为2.5%;反应时间3~4 h,产品收率为88.6%,催化剂的重复使用性较好,催化体系优于硫酸法。     

Synthesis,Characterization, and Crystal Structure of Thallium(I) Complex containing Monodeprotonated 2,6‐Pyridinedicarboxylic Acid

The reaction of an ethanolic solution 2,6‐pyridinedicarboxylic acid ( 1 , LH₂) with TlNO₃ in the presence of triethylamine led to the coordination polymer [Tl(LH)]_n ( 2 ). The complex was characterized by elemental analysis, IR spectroscopy and single‐crystal X‐ray diffraction. Crystal data for 2 at –80 °C: monoclinic, space group I2/a, a = 696.1(1), b = 1190.6(2), c = 931.0(2) pm, β = 103.28(1)°, Z = 4, R₁ = 0.0256.     

Mechanical and physico-chemical characterization of cyclodextrin finished polyamide fibers

We present the study of the cyclodextrin (CDs) finishing of polyamide fibers (PA) by means of citric acid (CTR) as crosslinking agent. We observed that the mode of grafting happened by the formation of a crosslinked polymer formed between CTR and CDs. This polymer physically adhered to the fibers network and was resistant to hot water washings. Modified fibers were characterized by evaluating the contact angle with a polar liquid and by studying the hysteresis of damping of PA fibers (Cahn balance) with various grafting rates and by studying the absorptivity of grafted fabrics via the technique of the posed drop (Digidrop^® instrument). Then a mechanical characterization of the PA fabrics grafted with various proportions of CDs was accomplished, by traction and tear tests by using a tensile-test bench Lohmergy. Finally a topographic study of PA grafted surfaces was approached by atomic force microscopy (AFM and LFM; contact and non-contact mode) which permitted to evaluate the roughness and the chemical heterogeneity of the grafted surfaces.     

Biginelli reaction in aqueous medium: a greener and sustainable approach to substituted 3,4-dihydropyrimidin-2(1H)-ones

An environmentally benign aqueous Biginelli protocol for the synthesis of substituted 3,4-dihydropyrimidin-2(1H)-ones using polystyrenesulfonic acid (PSSA) as a catalyst has been achieved. These microwave-assisted reactions proceed efficiently in water in the absence of organic solvent, with simple filtration as the product isolation step.     

弱酸树脂D113对S-腺苷-L-蛋氨酸的交换行为及分离应用研究

考察了S-腺苷-L-蛋氨酸 (S-adenosyl-L-methionine, SAM) 在弱酸树脂争光D113上的静态吸附及分离行为,利用Langmuir等温式对平衡等温线进行了拟合,实验表明,随着pH的提高,平衡交换量增加,提高温度和SAM的初始浓度在一定程度上能促进内扩散过程,利用D113树脂在f 1.7×30.0cm小型柱上从酵母提取液中分离SAM的得率为90%以上,纯度达87%以上。     

Solid Phase Synthesis of 4H-Pyrimido[2,1-b] Benzothiazol-4-ones from Resin-Bound Cyclic Malonic Ester

The solid phase synthesis of 4H-pyrimido[2,1-6] benzothizaol-4-ones has been reported.     

A Systematic Study of the Use of DL-Tartaric Acid in the Synthesis of Silica Materials Obtained by the Sol-Gel Method

DL-tartaric acid was used as a template for the formation of silica nanotubes and spheres by the sol-gel method from tetraethylorthosilicate (TEOS) as silica source. The reactions were carried out in ethanol/water mixtures in the presence of aqueous ammonia, between 0°C and 75°C, using both stirred and non-stirred conditions. TEM and SEM images show that the yield and microstructure of the silica is influenced by the synthetic conditions (temperature, ammonia (aq) concentration, gelation time, solvent mixture). It was observed that the chiral form of the tartaric acid used and the diffusion of TEOS to the template determines the eventual silica structure.     

利用电荷迁移反应测定头孢羟氨苄

提出一种基于电荷迁移反应简便可靠地测定头孢羟氨苄的分光光度法。在甲醇－乙醇介质中，头孢羟氨苄与氯冉酸于５０℃反应１５ｍｉｎ能够形成稳定的１：１络合物，其λｍａｘ＝５２８ｎｍ，线性范围为２０￣４００ｍｇ／Ｌ。用拟定的方法测定原粉和胶囊，结果与药典法一致。对浓度１００ｍｇ／Ｌ的药物１０次测定相对标准偏差为１．４％，样品的标准加入回收率为９９．０％￣１００．８％。     

羧基膦－钯－酸体系催化烯烃氢酯基化反应

以钯－膦－酸体系催化烯烃氢酯基化的反应日显重要，而膦配体是决定此反应的重要因素，用二苯基膦乙酸（ＤＰＡ）为配体的钯催化剂体系，对烯烃的氢酯基化反应作了研究。对影响反应的各种因素如反应温度、反应压力、不同的溶剂、膦配体及酸助剂的量等作了考察，发现此配体对烯烃的区域选择性有改善。并用此催化体系对不同结构的烯烃进行了研究，发现有如下的活性顺序：环烯烃＞直链端烯＞直链内烯。     

复合半导体负载金属材料光催化性能研究

CO₂和烃类光催化直接合成烃类氧化物在合成化学、碳资源利用和环境保护等方面均有重大意义。用溶胶-凝胶和浸渍-还原相结合的方法制得M/V₂O₅-TiO₂(M=Pd、Cu、Ni和Ag)光催化剂。利用XRD、TPR、IR、TPD、UV-Vis DRS和光反应器等技术研究了负载金属复合半导体的物相结构、吸附性能、光吸收性能和光催化反应性能。结果表明：金属负载在复合半导体上延迟了TiO₂由锐钛矿向金红石相的转化,增强了V与载体TiO₂的相互作用,使TiO₂光吸收限发生蓝移,对可见光部分的吸收明显增加,拓宽了催化剂的光响应范围;材料吸光性能强弱顺序Pd/V₂O₅-TiO₂ >Cu/V₂O₅-TiO₂ >Ag/V₂O₅-TiO₂>Ni/V₂O₅-TiO₂;材料的吸附性能及反应物的吸附态是反应发生的关键,CO₂在Ag/V₂O₅-TiO₂表面无法形成卧式吸附态,没有目的产物甲基丙烯酸(MAA)生成,光量子效率低;光吸收性能较好的Pd/V₂O₅-TiO₂对CO₂吸附能力过强,卧式吸附态脱附温度高,光催化效率不高;Cu/V₂O₅-TiO₂对CO₂吸附能力适中,CO₂与C₃H₆脱附温度较接近,实现了“光-表面-热”的协同作用,光量子效率最高,达15.1%。