混合型神经网络专家系统

本文在分析传统人工智能与神经网络信息处理的各自特点的基础之上,指明二者相互结合的必然性,并给出了混合型神经网络专家系统的框架。     

高炉异常炉况判断专家系统的设计与实现

探讨了高炉异常炉况判断专家系统的结构,讨论了从传感器数据中抽取高炉况特征的方法,时态黑板结构与时间知识表示,对于炉况特征的模糊量化和专家知识中的参数设定,系统采用机器学习方法自动调整,对于高炉异常炉况的操作方法,系统采用规划－动作－反应方法向用出动国作建议,并对所动作动作建议实现实时的重构解释。     

偏最小二乘-速差动力学分光光度法同时测定杀虫剂残杀威和异丙威两组分

采用速差动力学分光光度法对氨基甲酸脂类杀虫剂残杀威和异丙威进行同时测定，这两种化 的能在碱性条件下水解生成酚盐，进而与对氨基苯酚及高碘酸钾的反应产物醌亚胺发生偶联反应，生成蓝色化合物。反应的速率适中，可用于动力学分析。实验采集了多个时间点下538－700nm间的动力学－吸光度数据，构成量测矩阵，并采用偏最小二乘（PLS）法对量测数据进行解析。本文还对合成样品和环境水样中的残杀威和异丙威含量进行测定，获较好的结果。     

毛细管区带电泳法测定冬虫夏草中的腺苷、腺嘌呤和尿嘧啶

建立了毛细管区带电泳法测定天然和人工冬虫夏草中腺苷、腺嘌呤和尿嘧啶含量的分析方法。采用15mmol/L硼砂＋14mmol/L磷酸二氢钠＋5％（V／V）甲醇（pH＝9.5）作为缓冲体系，在电压为18kV和检测波长为254nm的条件下，冬虫夏草提取液中的腺苷、腺嘌呤和尿嘧啶实现了基线分离。定量分析表明，3种成分的校正峰面积与质量浓度呈较好的线性关系(r≥0.9991）。考察了缓冲溶液的pH值、浓度及有机改性剂对腺苷、腺嘌呤和尿嘧啶迁移行为的影响。     

金属配合物-寡聚核苷酸定位断裂剂研究进展

核酸切割试剂与寡聚核苷酸(ODN)偶联制得的人工核酸酶能在特定位点断裂DNA或RNA,为人工核酸酶的分子设计提供了一种新方法.本文综述了金属配合物-ODN识别切割试剂的偶联方式及其与靶分子的作用机制,并指出了今后的研究方向.     

Synthesis and Characterization of Two Novel High Valent Dinuclear Complexes with a Triphenolate Ligand Bearing Functional Groups

Two novel high valent complexes [M2(III, III)L(p--OAc)2].PF6 (M=Mn, Fe; 9) were prepared, where L was the tri-anion of 2,6-bis{[(2-hydroxy-3-(morpholin-4-yl methyl)-5-tertbutyl benzyl)(pyridyl-2-methyl)amino]methyl}-4-methyl phenol which contained additional phenolic, tert-butyl and morpholin-4-yl methyl groups compared to its parent [Mn2(Ⅱ, Ⅱ)(bpmp)(μ-OAc)2]-ClO4 (10). These improvements decreased the difference between the new model and (Mn)4 cluster (OEC in nature).     

基于支持向量机的羰基化合物红外光谱研究

设计了一个4层分等级分类系统，通过支持向量机技术对羰基化合物的红外光谱成功地进行了信息分类和提取，并与人工神经网络进行比较，结果表明：支持向量机对羰基类化合物红外光谱分类效果优于人工神经网络；另外详细探讨了表征酰胺类化合物的特征光谱峰片段对识圳伯仲叔酰胺的影响，证明了酰胺的N-H伸缩振动峰对识别伯仲叔酰胺贡献最大，为构建红外光谱智能解析系统提供了定量依据。     

人工光合作用反应中心的研究进展

本文对几种人工光合作用反应中心系统,做一个简单的综述,其中包括叶绿素和细菌叶绿素二聚体,卟啉二聚体,卟啉-苯醌共价键络合物以及其他合成中心。     

ELASTIC BEHAVIOR OF PROTEIN-LIKE SINGLE CHAIN

The conformational properties and elastic behaviors of protein-like single chains in the process of tensile elongation were investigated by means of Monte Carlo method. The sequences of protein-like single chains contain two types of residues: hydrophobic (H) and hydrophilic (P). The average conformations and thermodynamics statistical properties of protein-like single chains with various elongation ratio λ were calculated. It was found that the mean-square end-to-end distance r increases with elongation ratio,λ. The tensor eigenvalues ratio of : decreases with elongation ratio λ for short (HP)x protein-like polymers, however, the ratio of : increases with elongation ratioλ,especially for long (H)x sequence. Average energy per bond increases with elongation ratioλ, especially for(H)x protein-like single chains. Helmholtz free energy per bond also increases with elongation ratioλ. Elastic force (f), energy contribution to force (fU) and entropy contribution to force (fs) for different protein-like single chains were also calculated.These investigations may provide some insights into elastic behaviors of proteins.     

Electrodeposition of a cobalt-molybdenum alloy from an ammonia-citrate electrolyte

Kinetics of processes of electrochemical production of a cobalt-molybdenum alloy out of an ammonia-citrate electrolyte is studied. The electrolyte’s composition is similar to that used for depositing a nickel-molybdenum alloy. It is established that the cobalt-molybdenum alloy undergoes deposition at smaller values of pH (5.0–6.0) than the nickel-molybdenum alloy (7.0–9.0). The current efficiency for the cobalt-molybdenum alloy is substantially dependent on the electrolyte pH, whereas the chemical composition of the obtained deposits is practically independent of the electrolyte pH in the pH interval 5.0–8.0 at current densities of 0.025 to 0.100 A cm^?2. On the other hand, a change in the electrolyte pH produces a considerable effect on the morphology of the obtained deposits. At large values of pH (pH 8.0), one can obtain a powder-like deposit of the cobalt-molybdenum alloy with a small value of the current efficiency. The deposits that are obtained in the pH region 5.0–6.0 have some cracks, with the number of cracks increasing with the electrolyte pH.