An Antibody with a Variable‐Region Coiled‐Coil “Knob” Domain

The X‐ray crystal structure of a bovine antibody (BLV1H12) revealed a unique structure in its ultralong heavy chain complementarity determining region 3 (CDR3H) that folds into a solvent‐exposed β‐strand “stalk” fused to a disulfide crosslinked “knob” domain. We have substituted an antiparallel heterodimeric coiled‐coil motif for the β‐strand stalk in this antibody. The resulting antibody (Ab‐coil) expresses in mammalian cells and has a stability similar to that of the parent bovine antibody. MS analysis of H–D exchange supports the coiled‐coil structure of the substituted peptides. Substitution of the knob‐domain of Ab‐coil with bovine granulocyte colony‐stimulating factor (bGCSF) results in a stably expressed chimeric antibody, which proliferates mouse NFS‐60 cells with a potency comparable to that of bGCSF. This work demonstrates the utility of this novel coiled‐coil CDR3 motif as a means for generating stable, potent antibody fusion proteins with useful pharmacological properties.     

Peptide Nanotubes

The self‐assembly of different classes of peptide, including cyclic peptides, amyloid peptides and surfactant‐like peptides into nanotube structures is reviewed. The modes of self‐assembly are discussed. Additionally, applications in bionanotechnology and synthetic materials science are summarized.     

一种弹体入水冲击波阴影成像可视化系统及其试验研究

扩大成像视野对于开展充水容器中弹体入水冲击波传播及弥散方面的可视化研究具有重要的实际意义。阴影成像技术适用于大视野实验,且对流场冲击波和扰动的可视化研究具有简单性和通用性,其中直接阴影成像最为简单,但可靠点光源的缺乏是阻碍其发展应用的瓶颈。因此基于国产短弧氙灯管,自制了短弧氙灯点光源,根据阴影成像原理,设计出一种弹体入水冲击波阴影成像可视化系统,详细介绍了其组成和运行原理。利用该系统对高速弹体入水进行了试验研究,获得了弹体入水冲击波的阴影成像和冲击波信号的压力时程曲线,通过阴影成像和冲击波信号相结合分析了弹体入水冲击波的传播特性,并进行了理论验证。结果表明:该弹体入水冲击波阴影成像可视化系统具有可靠性和设计的合理性。弹体高速入水后,初始冲击波的强度最大,随着冲击波的传播,冲击波强度逐渐降低,水中冲击波的传播速度不断降低,球形冲击波的半径逐渐增大。     

三解析函数的一般复合边值问题

研究开口弧段Γ上三解析函数的Riemann边值问题与封闭的Liapunov曲线L上三解析函数的Hilbert边值问题复合而成的一般复合边值问题,利用消去法将问题转化为Hilbert边值问题加以求解,并给出可解性条件和解的具体表达式.     

X100直缝埋弧焊管断裂韧性的裂纹尖端张开位移试验研究

为了检验X100直缝埋弧焊管的断裂韧性,采用三点弯曲多试样法,在室温、-10℃和-30℃下对该焊管的母材、热影响区和焊缝部位进行了裂纹尖端张开位移(CTOD)试验.测试结果表明:在同一温度下,CTOD试验的表观启裂值δ0.05、条件启裂值δi和最大载荷值δm的分布规律为母材最好,焊缝次之,热影响区最差;采用裂纹扩展阻力和撕裂模量表征的分布规律为母材最好,热影响区次之,焊缝最差;焊接热影响区组织中含有大量呈块状分布的铁素体,而粒状贝氏体等增强相的含量较少,这会造成其韧性下降,使焊管出现局部失稳现象.     

基于时空关系的手机定位数据处理方法

应用手机定位技术进行交通信息的采集是当前国内外研究的一个热点.但是效果并不如人意,其中手机定位数据中包含了大量的“噪声”是一个重要原因.以某区域的手机定位数据作为对象,结合CELL_ID定位技术与手机切换的原理,首先根据蜂窝网基站的点数据,创建了与之对应的点、面图层;然后采用基于GIS时空关系的方法,对手机定位数据中“...     

Alternating copolymers consisting of arylalkyl methacrylates. II. Effect of coil collapse on fluorescence spectra of alternating copolymers of 2-(9-carbazolyl)ethyl methacrylate and aromatic vinyl monomers

Alternating and random copolymers of 2-(9-carbazolyl)ethyl methacrylate with aromatic vinyl monomers were synthesized and their fluorescence properties were compared in good and poor solvents. Contraction of the polymer coils induced the hypochromic effect, i.e., the mutual interaction of the ground-state chromophores, but caused little quenching of their excited state. This is sharp in contrast with the vinyl-type of polymers, exhibiting large interactions in both the ground and excited states. Introduction of bulky groups on the comonomers in the alternating copolymers further suppressed these interactions. © 1996 John Wiley & Sons, Inc.     

电弧离子镀技术中脉冲偏压对TiN薄膜的影响

用正交设计实验研究了电弧离子镀技术中采用脉冲偏压以后各种参数对沉积TiN薄膜性能的影响.研究表明,与直流偏压相比,直流叠加脉冲偏压能更好地细化颗粒,降低薄膜的表面粗糙度,提高沉积速率.对实验结果的方差分析显示:气氛和频率是降低表面粗糙度、提高沉积速率的主要因素.     

外加轴向磁场对短路过渡的影响

为提高短路过渡频率、减少焊接飞溅,分别通过施加直流与交变轴向磁场,研究了轴向磁场对短路过渡的影响规律,分析了高速摄像、电流电压信号以及熔滴在磁场作用下的短路过渡受力情况.结果表明:当直流磁场励磁电流为4 A时,短路过渡频率达到最大值;当交流磁场励磁电流为9 A、磁场频率为100 Hz时,短路过渡频率达到最大值,这与电流...     

基坑边坡稳定性计算方法的探讨

施工开挖对土体产生卸载作用,坑壁及坑底土体的应力状态和应力路径发生变化.就基坑边坡整体滑动稳定性计算所采用的圆弧法提出问题,根据卸载土体的不同状况设计二组快剪试验方案,并对其加载、卸载过程的强度特征进行试验研究.试验结果表明,土体的卸载强度与加载强度存在差异性,为完善基坑边坡稳定计算方法提供依据.