晶态氮化碳薄膜的低温合成

The synthesis of carbon nitride films at low temperature has been investigated using pulsed arc discharge from methanol solution with nitrogen atmosphere. Raman spectra and X-ray diffraction (XRD) analysis suggest that crystalline carbon nitride films may be prepared at low substrate temperature (220 ℃). At same time, the substrate temperature has a significantly effect on the nitrogen content and structure of the films. Increasing substrate temperature (300 ℃) would decrease the content of nitrogen in the films and result in a formation of carbon films.     

Degradation of 4-Chlorophenol using a Gas–Liquid Gliding Arc Discharge Plasma Reactor

The gas–liquid gliding arc discharge plasma is used directly to study degradation and dechlorination of 4-Chlorophenol (4-CP) in solution. The typical AC waveforms of discharge voltage and current revealed that the discharge behavior was not definitely periodic. The chemical oxygen demand (COD) abatement of 4-CP solution with stainless steel electrode is higher than that with aluminum or brass electrode; When air was used as carrier gas the COD abated from 1,679.2 to 190 mg/L (i.e., 88.68% abatement) after 76 min plasma treatment; Increasing gas–liquid mixing rate could also increase the degradation of 4-CP; adding appropriate amounts of Fe²⁺ or iron chips to the solution were found to be favorable for 4-CP degradation. The main intermediates of 4-CP degradation are p-benzoquinone, hydroquinone, 4-chlorocatechol, p-chloronitrobenzene, and ring cleavage products (acetic acid, glycol, propanone, and others). Furthermore, possible pathways of 4-CP degradation in solution are proposed.     

Selective formation of AAB- and ABC-type heterotrimeric alpha-helical coiled coils

The alpha-helical coiled coils have a representative amino acid sequence of (abcdefg)(n) heptad repeats. We previously reported that two peptides named IZ-2A and IZ-2W formed an (IZ-2A)(2)/IZ-2W heterotrimer with an Ala-Ala-Trp interaction in the hydrophobic core. In this paper, we describe the selective formation of AAB- and ABC-type heterotrimers. To increase the selectivity of the AAB-type heterotrimeric formation, Lys residues at the f position were mutated to either an Ala or a Gln residue to form IZ-2A(fA) or IZ-2W(fQ). Separately, both IZ-2A(fA) and IZ-2W(fQ) have a random structure at pH 7 and 20 degrees C. However, together IZ-2A(fA) and IZ-2W(fQ) form a 2:1 complex with a thermal transition midpoint (Tm) of 48 degrees C. This procedure was applied to prepare the ABC-type heterotrimer, in which two sets of Ala-Ala-Trp interactions were designed in the hydrophobic core. Interhelical interaction between the e and g positions and the alpha-helical propensity of the amino acid at the f position were also considered in the design. The resultant three peptides selectively formed the ABC-type heterotrimer with a Tm of 51 degrees C. Other peptide combinations had random coil properties.     

Effect of the Coil Angle in an Inductively Coupled Plasma Torch: A Novel Two-Dimensional Model

A two-dimensional model has been developed for the calculation of the electromagnetic (EM) fields generated by spiral coil currents, in order to obtain a better representation of the actual configuration used in a typical inductively coupled plasma (ICP) torch. In order to obtain the EM fields in a two-dimensional model, the change of EM field in tangential direction is neglected and the coil is assumed to be a concentric cylinder. In order to justify our assumption, the EM, flow and temperature fields resulting from five-ring coil and concentric cylinder coil are compared and the results are almost the same except for the EM field in the vicinity of the coil. In the case of the spiral coil, the coil current is inclined with respect to the horizontal plane. Therefore current in the cylinder coil is assumed to have the same inclined angle, which is split into tangential and axial components. The axial electric field and hence an axial current in plasma is induced by the axial component of the spiral coil current. Charge density is accumulated in the plasma, since the axial current cannot form a loop. In order to obtain the EM field and the charge distribution in the plasma generated by the spiral coil, the equations of axial vector potential and electrostatic potential have been derived. Due to the swirling Lorentz force (J_z×B_r) an axisymmetrical swirling fluid model is used to simulate the plasma flow in an axisymetrical configuration. With an inclined angle of the coil current being 3.7° and the frequency being 3 MHz, computational results show that the swirling Lorentz force causes plasma swirling with a maximum speed of 3.41 m/s near the plasma center when the injected sheath gas and central gas are not swirling. In these conditions, the real and imaginary parts of the maximum electrostatic potential are 0.95 V and 1.66 V, respectively. When the electrostatic field is neglected, the swirling velocity of the plasma is 3.95 m/s.     

A strategy for synthesis of polymer-protective bimetallic colloids

A strategy for the synthesis of polymer-protective bimetallic sols is proposed which has the advantage of the strong protective effect of the polymer agent on one of the composites to stabilize the bimetallic colloidal particles. This strategy is certified to be useful to the predication of the formation of stable bimetallic colloids protected by polymer and to the control of the particle size to a certain extent. A series of new PVP-protective bimetallic colloidal dispersions containing noble metal element (Pt, Rh, Pd), light transition metal element (Co, Fe), and boron are obtained from the corresponding salts by the methods of reduction by stage and coreduction, using the NaBH4 as reductant. The TEM, XRD and EPMA measurements indicate the formation of bimetallic colloids. An interesting kind of coil aggregation is observed in the systems of PVP-Pt-Co and PVP-Rh-Co prepared by the method of reduction by stage.     

Operating characteristics and energy distribution in transferred plasma arc systems

A specially designed plasma chamber was constructed to study the operating characteristics of a dc plasma-transferred arc of argon, struck between a fluid convective cathode and a water-cooled anode. The arc voltage increased markedly with arc length and with an increase in the inlet velocity of the argon flow past the cathode tip, and much less with an increase in current. Radiation from the plasma column to the chamber walls and transfer of energy to the anode were the two principal modes of transfer of the arc energy. The former was dominant in the case of long arcs and at high inlet argon velocities. At the anode, the major contribution was from electron transfer, which occurred on a very small area of the anode (～5 mm in diameter). Convective heat transfer from the plasma was somewhat less. In all cases, the arc energy contributions to cathode cooling and to the exit gas enthalpy were small. From total heat flux and radiative heat transfer measurements, it was estimated that the plasma temperature just above the anode was in the range 10,000–12,000 K. Preliminary experiments with an anode consisting of molten copper showed that the arc root was no longer fixed but moved around continuously. The arc was othwewise quite stable, and its operating characteristics differed little from those reported for solid anodes, in spite of the greater extent of metal vaporization.     

Chemical modifiers in arsenic determination in biological materials by tungsten coil electrothermal atomic absorption spectrometry

Palladium, iridium, and rhodium are evaluated as possible chemical modifiers in the determination of As in digest solutions of biological materials (human hair and clam) by tungsten coil electrothermal atomic absorption spectrophotometry (TCA-AAS). The modifier in solution was applied onto the coil and thermally pre-reduced; the pre-reduction conditions, the amount of modifier, and the thermal program were optimized. Palladium was not satisfactory, whereas Ir and Rh were effective modifiers and rendered better relative sensitivity for As by a factor of 1.4 and 1.9, respectively compared to the case without modifier. Upon optimization of thermal conditions for As in pre-reduced Ir (2.0 µg) and Rh (2.0 µg) modifiers and in the digest solutions of the study matrices, Rh (2.0 µg) was more effective modifier and was selected as such. The mean within-day repeatability was 2.8% in consecutive measurements (25–100 µg L^–1) (3 cycles, each of n=6) and confirmed good short-term stability of the absorbance measurements. The mean reproducibility was 4.4% (n=20 in a 3-day period) and the detection limit (3 _blank/slope) was 29 pg (n=15). The useful coil lifetime in Rh modifier was extended to 300–400 firings. Validation was by determination of As in the certified reference material (CRM) of Oyster tissue solution with a percentage relative error (E _rel%) of 2% and percentage relative standard deviation (RSD%) of 3% (n=4), and by analytical recovery of As spiked in CRM of human hair [94±8% (n=4)]. The methodology is simple, fast (sample readout frequency 21 h^–1), reliable, of low cost, and was applied to the determination of As in hair samples of exposed and unexposed workers.     

Radiation formation of polymeric nanogels

An alternative method of synthesis of polymeric nanogels is proposed, based not on polymerization, but on intramolecular crosslinking of polymer chains, initiated by pulse irradiation in dilute aqueous solutions. Kinetic data show that for many water-soluble polymers irradiation under these conditions result in intramolecular crosslinking. Preliminary product studies on poly(vinyl alcohol) indicate that in fact internally crosslinked macromolecules can be obtained by this technique.     

Determination of trace metals in industrial boron carbide by solid sampling optical emission spectrometry. Optimization of DC arc excitation (current, atmosphere and chemical modifier)

Graphite arc emission spectrometry has become possible as a result of the invention of novel types of optical spectrometers with Echelle-optics and semiconductor array detectors, and by the application of electronically controlled, high current arc generators. An optimization of the excitation parameters to boron carbide analysis is reported here, measuring background corrected line intensities that were integrated for the time of total evaporation of 5 mg boron carbide sample with or without added chemical modifiers. The following set of experimental conditions were compared with respect of analytical sensitivity and precision: (A) no modifier, Ar + O₂ (20%), 16 A; (B) sample + graphite powder (1 + 1), Ar + O₂ (20%), 16 A; (C) sample + CaF₂ (1 + 1), Ar, 25 A; (D) sample + CaF₂ + graphite powder (1 + 1 + 1), Ar, 25 A. The graphite powder modifier resulted in improved precision in general, and the CaF₂ was effective as a plasma ionization buffer and fluorinating agent. The best compromise was found under conditions B, when oxygen was present in the discharge atmosphere. This is likely due to the stepwise conversion of the boron carbide matrix to the more volatile boron oxide. Under conditions B, detection limits in the ranges of 0.3–9 μg g⁻¹ for Al, Ca, Cr, Cu, Fe, Mg, Mn and Si and that of 18–38 μg g⁻¹ for Ti, W, and Zr were attained. Average RSDs of 10.2 and 9.7% were found, respectively, without and with internal referencing to boron.     

电弧喷涂铝涂层的抗高温空气氧化性能

采用电弧喷涂技术在Q235钢基体上制备铝涂层。用Q235钢、铝涂层和封孔铝涂层3种试样进行400℃和500℃涂层氧化和失效试验，并绘制了氧化动力学曲线。结果表明，在500℃以下，在Q235钢基体上电弧喷涂铝涂层和封孔铝涂层可以提高试样的抗氧化能力，但只是在短期内有效。在相同的温度下，封孔铝涂层试样氧化速度最低，铝涂层试样和Q235钢试样的氧化速度大约分别是它的2倍和3倍。氧化过程中，氧化气体渗透到涂层内部，Al2O3膜不断生成、破碎和剥落，并在涂层颗粒机械结合部位堆积，产生的张应力造成涂层的内聚强度降低，塑性和密封性能变差，防腐作用减弱，这是涂层氧化和失效的主要原因。