安装误差对正交弧齿锥齿轮副接触区影响的分析

本文从理论上分析了正交弧齿锥齿轮副的各种安装误差对啮合接触区的单独影响和综合影响,建立了安装误差作用下齿面接触区的数学模型,并通过具体实例讨论了各项安装误差对啮合接触区单独影响和综合影响的程度以及综合影响的“叠加效应”和“互补效应”,提出了满足接触要求前提下降低安装要求的措施.     

稀土富勒烯生成的影响因素初探

采用某些特殊的放电和提取方法，如反向放电和甲苯高温高压提取等可以有效地提高稀土富勒烯的生成效率［‘，‘’，并已先后成功高效地合成了许多含稀土富勒烯「‘’．对其提纯、表征、衍生和应用也进行了研究［‘－’j．但对影响稀土富勒烯生成的因素研究较少．在石墨律中同时填入La，Y，Sc的稀土氧化物，对其稀土富勒烯生成效率的情况进行了研究，认为稀土元素的第一电离能是影响稀土富勒烯生成的主要因素‘’，’‘．Moro等采用激光和热解吸质谱对稀土富勒烯的研究结果表明，稀土元素的氧化态是影响稀土富勒烯生成的决定性因素”’．本…     

Polyynes and cyanopolyynes synthesis from the submerged electric arc: about the role played by the electrodes and solvents in polyynes formation

The products of the electric arc between graphite electrodes have been investigated by high performance liquid chromatography-diode-array detector (HPLC-DAD) analysis in various media: distilled water, liquid nitrogen, methanol, ethanol, n-hexane and benzene. In distilled water, hydrogen capped polyynes H-(CC)_n-H were the unique products demonstrating that carbon is supplied by the graphite electrodes while hydrogen is supplied by the solvent plasmalysis (in this case water plasmalysis). Arcing graphite electrodes in liquid nitrogen produces cyanopolyynes: NC-(CC)_n-CN demonstrating that in this case the end groups of the polyyne chains are supplied by molecular nitrogen plasmalysis caused by the electric arc. Graphite arcing in methanol and ethanol produces very clean solutions (by-products negligible or absent) of hydrogen-capped polyynes with C₈H₂ as the main product accounting for more than 70 mol percent of the total polyyne concentration. By replacing graphite electrodes with titanium electrodes in methanol or in ethanol, polyynes are not formed at all; only trace amounts of polycyclic aromatic hydrocarbons (PAHs) were detected. When arcing with graphite electrodes is conducted in n-hexane or in benzene, polyyne formation is accompanied by a significant production of PAH, especially in benzene. These results have been rationalized in terms of carbonization or coking tendency of a given solvent. The effect of using titanium electrodes in place of graphite electrodes has been investigated also in n-hexane and in benzene as well as the effects of very high electric current intensity employed to ignite and sustain the submerged electric arc.     

Hierarchical Structure‐Within‐Structure Morphologies in A2‐star‐(B‐alt‐C) Molecules

We employ dissipative particle dynamics (DPD) to examine the self‐assembly behavior of A₂‐star‐(B‐alt‐C) molecules. We successfully observe various types of hierarchical structure‐within‐structures, such as A‐formed spheres in the matrix formed by B and C alternating layers, hexagonally packed A‐formed cylinders in the matrix with B and C segregated layers, B and C alternating layers‐within‐lamellae, coaxial B and C alternating domains within hexagonally packed BC‐formed cylinders in the A‐matrix, and co‐centric BC‐alternating domains within BC‐formed spheres in the A‐matrix, by increasing the A composition. Generally speaking, the small length‐scale B and C segregated domains are in parallel to the large length‐scale structures. This hierarchical periodicity along the same axis as well as the various characteristic structures, that the A₂‐star‐(B‐alt‐C) copolymers display, are quite different from those in A‐block‐(B‐graft‐C) coil‐comb copolymers. Moreover, it is interesting to find that when the copolymer chain length increases, though the hierarchical structure type is maintained, the number of small length‐scale lamellae that can form within the large length‐scale structure increases. These hierarchical structures under various compositions are reported theoretically for the first time in the copolymer systems consisting of the alternating blocks, and are in good agreement with the most recent experimental work by Matsushita and co‐workers (Macromolecules 2007 , 40, 4023).     

Numerical analysis of the behavior of hydrogen added into a free-burning arc

The objective of the present work is to investigate the behavior of hydrogen in an atmospheric-pressure free-burning argon are when a small amount of hydrogen is added into the arc. A two-dimensional model calculation is carried out under the assumption that the ionization reaction of argon is in equilibrium and the reactions among hydrogen molecules, atoms, ions, and electrons are not necessarily in equilibrium. This calculation gives the following conclusion. The hydrogen mass fraction of 0.001 is too small to affect the flow and temperature fields markedly, and the concentration ratios among the hydrogen species are in equilibrium in the greater part of the arc region except for same parts with a steep temperature gradient. The hydrogen mass Junction, however, is not uniform in the me and, especially in the high-temperature region near the cathodes, over three dynes mass fraction of the hydrogen accumulates and flows downstream to cause a high flux of hydrogen atom toward the anode. This phenomena can be explained by the large difference between the diffusivity of hydrogen atom and that of hydrogen ion in argon ion.     

华北克拉通恒山地区晚太古代变质火山岩的地球化学特征及构造意义

对恒山地区出露的变质火山岩开展岩相学、地球化学、锆石U-Pb年代学和Hf同位素研究,旨在确定其形成时代,探讨岩石成因及地球动力学意义。锆石U-Pb定年结果表明,这些变质火山岩喷发于新太古代晚期(2508±20Ma)。地球化学分析结果显示,恒山变质火山岩由变质玄武岩和变质玄武安山岩组成,SiO₂(45.51%～62.67%)、FeO_T (4.43%～15.72%)和MgO (3.75%～8.14%)含量变化幅度大,是幔源岩浆经单斜辉石、角闪石和磁铁矿分离结晶的产物。这些变质火山岩富集轻稀土(LREE)和大离子亲石元素(LILE),亏损重稀土(HREE)和高场强元素(HFSE),具有相对高的Th含量和Th/Yb比值,呈现钙碱性岛弧火山岩的特征。结合不相容元素比值Nb/Yb,Zr/Yb和(Nb/La)_N的特点,推测其来源于俯冲带具流体交代特征的富集地幔源区。结合区域构造背景,推断恒山变质火山岩形成于新太古晚期大陆弧环境。     

诱导法曲率对圆弧齿线双圆弧齿轮接触强度的影响

根据齿轮啮合原理,分析并比较了圆弧齿轮双圆弧齿轮与普通双圆弧齿轮啮合特性,通过推导这种新型齿轮齿面诱导法曲率,分析了接触强度得以提高的原因。同时用切齿法进行研究后得出,该齿轮还具有较高弯曲强度。     

Three-Dimensional Modeling of the Turbulent Plasma Jet Impinging upon a Flat Plate and with Transverse Particle and Carrier-Gas Injection

Modeling results are presented concerning the turbulent thermal plasma jet impinging normally on a substrate and with transverse injection of feedstock particles and their carrier gas from a single injection tube. The k- two-equation model is employed to model the turbulence, and particle dispersion is studied considering the interaction between the moving particles and turbulent eddies and considering the effect on particle trajectories of the random variation of the turbulent fluctuating velocities in their magnitude and direction. A well-validated three-dimensional (3-D) computer code is used in the modeling. The 3-D effects due to the carrier gas injection on the jet flow field and thus on the particle trajectories and heating histories are shown to be appreciable. The radial location of the injection tube with respect to the plasma jet is shown to be a critical parameter for the study of 3-D effects, besides the carrier-gas/plasma stream mass flux ratio. Particle dispersion considerably widens the distribution of the particle trajectories and heating histories. In addition, although pertinent swirl number is often rather small, swirling may also affect the modeling results.     

Nafion化学修饰圆盘预富集-石墨炉 原子吸收联用法对牛血超氧化物歧化酶中铜、锌分布状态的研究

本文研究了Nafion化学修饰钨丝圆盘预富集-石墨炉原子吸收(GFAAS)方法测定牛血超氧化物歧化酶(SOD)中游离态Cu～(2+)及Zn～(2+)的方法,并用GFAAS法直接测定SOD中铜、锌的总量,证实了牛血SOD中金属辅基铜、锌原子个数比为1:1,初步探讨了一定浓度的牛血SOD中Cu～(2+)、Zn～(2+)的表观离解平衡常数。为提高SOD的活性和稳定性的研究,提供了一种有效的方法。     

Effects of Oxygen and Water Vapor on Volatile Organic Compounds Decomposition Using Gliding Arc Gas Discharge

The combined effects of oxygen and water vapor on three typical volatile organic compounds, i.e. tetrachloromethane, n-butane and toluene, decomposition efficiency under gliding arc gas discharge conditions are studied. The electron density and the density of the reactive radicals such as O and OH are modified by addition of oxygen and water vapor. Consequently, the decomposition process can be enhanced or suppressed, depending on the involved chemical structures and reaction channels. The addition of oxygen and water vapor suppresses the tetrachloromethane decomposition which indicates that this process is mainly controlled by the electron dissociation reactions. By contrast, the n-butane and toluene decompositions are enhanced, which shows that they can be mainly ascribed to the radical induced reactions. Especially, in a moist atmosphere the OH radicals are supposed to play the most important role in the n-butane decomposition process.