偶联剂修饰纳米磁性粒子红外光谱及相关分析

以三氯化铁水溶液作前驱体，采用部分还原沉淀法，通过控制一些影响反应的参数，制备纳米磁性粒子(magnetic nanoparticles，MNes)，并分别用Z-6020，Z-6030和Z-6040硅烷偶联剂对其进行表面修饰．利用红外光谱、古埃磁天平、可见光分光光度计等手段，对MNPs的表面包覆官能团、磁化率、稳定性等进行表征．红外光谱分析表明，选用不同的偶联剂修饰MNPs，可以在其表面包覆各种活性的有机基团，除都含有大量-OH之外，用Z-6020修饰的MNPs还含有-NH2和-NH；用Z-6030修饰的，还含有-C-O和-C-C；用Z-6040修饰的，还含有-C-O，-C-O-C和-C-OH．同时，用Z-6020修饰的MNPs磁化率最高，稳定性较差；用Z-6040的，磁化率次之，稳定性最好；用Z-6030的，磁化率最低，稳定性最差．     

A Criterion for Spectrum Decomposition

We obtain a necessary and sufficient condition for the decomposition of the spectrum of an arbitrary nonsymmetric potential whose least value is attained at finitely many points.     

磁化合成铁氧体催化机理的探讨

本文用磁化合成法制取了一种新型高效铁氧体催化剂,用高分辨分析电镜,测定了其晶体结构、化学组成和原子级的显微形貌;提出了一种催化机制的新见解和一个研制催化剂的新方法.     

富马酸烷·3-PG酯抗氧化和防霉性能

在对没食子酸丙酯 (PG)的抗氧化活性、富马酸酯的防霉活性进行分析和预测的基础上 ,对其分子结构进行改造 ,设计出一类新型化合物———富马酸烷·3-PG酯 .对五种目标产物进行抗氧化和防霉性能测试的结果表明 ,它们均同时具有与没食子酸丙酯相当的抗氧化性能和与富马酸二甲酯相当的防霉性能 ,打破了以往抗氧化剂和防霉剂需分别添加的传统     

蒙特卡罗哈密顿新方案及其检验

蒙特卡罗哈密顿方法(MCH)是研究量子理论的数值模拟新方法, 其优点是可求出超出基态的能谱和波函数. 旧MCH方案需要自由粒子的信息, 较难推广应用于格点规范理论. 本文提出克服这个困难的新方案. 首先介绍这一方案的思想, 并以1维量子力学模型V(x)=μ²x²+λx⁴(其中μ²< 0,λ>0)为例说明实现这一新方案的具体计算步骤和方法.     

Analysis of Radiation Phenomena in a Wedge Ended Dielectric Slab Waveguide

Radiation phenomena observed in a wedge shape ended dielectric slab waveguide are analyzed using mode matching technique. The case of transverse electric polarization (TE) being parallel to dielectric slab waveguide is assumed. In order to describe the fields in the wedge region, a stack of dielectric plates is assumed and in each layer the fields are expanded in terms of the mixed spectrum of guided and radiated modes. A similar expansion is used in the constant thickness slab waveguide while in free space medium a continuous-radiation mode expansion is used. Then a mode matching approach is applied, incorporating the orthogonality properties of mixed spectrum modes, in order to compute the wave fields inside the dielectric slab waveguide and wedge medium. Mode matching is achieved by discretizing the continuous radiation mode spectrum leading into a numerically stable solution provided a sufficient large number of points are used to convert integrals into finite summations. Numerical computations are carried out for various wedge geometries and shapes including linear and exponential profiles.     

The semiclassical limit of a quantum Fermi accelerator

A classical Fermi accelerator model (FAM) is known to show chaotic behavior. The FAM is defined by a free particle bouncing elastically from two rigid walls, one fixed and the other oscillating periodically in time. The central aim of this paper is to connect the quantum and the classical solutions to the FAM in the semiclassical limit. This goal is accomplished using a finite inverted parametric oscillator (FIPO), confined to a box withfixed walls, as an alternative representation of the FAM. In the FIPO representation, an explicit correspondence between classical and quantum limits is accomplished using a Husimi representation of the quasienergy eigenfunctions.     

布尔“复合函数”的Walsh循环谱和自相关函数

本文利用布尔随机变量联合分布的分解式给出了布尔“复合函数”和某布尔函数符合率的分解算式,由此求得了布尔“复合函数”的 Walsh循环谱和自相关函数的计算公式,公式清楚地表明了“复合”所得布尔函数的 Walsh循环谱与起“复合”作用的函数和被“复合”的各函数所有线性组合的 Walsh循环谱之间的关系、“复合”所得布尔函数的自相关函数与起“复合”作用的函数谱和被“复合”的各函数的谱及相关函数之间的关系,这两个公式在布尔函数的密码学性质研究中会有广泛的应用.     

Dialdehyde starch‐crosslinked chitosan films and their antimicrobial effects

For improved mechanical and water‐swelling properties of chitosan films, a series of transparent films were prepared with dialdehyde starch as a crosslinking agent. Fourier transform infrared and X‐ray analysis results demonstrated that the formation of Schiff's base disturbed the crystallization of chitosan. The mechanical properties and water‐swelling properties of the films were significantly improved. The best values of the tensile strength and breaking elongation were 113.1 MPa and 27.0%, respectively, when the dialdehyde starch content was 5%. All the crosslinked films still retained obvious antimicrobial effects toward S. aureus and E. coli, and they showed potential for biomedical applications. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 993–997, 2003     

玻璃中CdSeS纳米晶体的室温光致发光谱

对掺有过饱和的镉、硒和少量硫的玻璃在500～800℃分别退火4h,生长了不同尺寸的CdSe_1-xS_x纳米晶体。测量了纳米晶体的室温吸收光谱和光致发光(PL)光谱,550℃生长的样品在300～800nm的范围没有观察到吸收和发光峰,表明温度低于550℃玻璃中不能形成纳米晶体。生长温度在600～650℃,纳米晶体的PL光谱主要为两个宽的发光带,即带边激子发光带和通过表面态复合的发光带。随着生长温度的升高,带边复合发光的蓝移减小,通过表面态的发光逐渐消失,并出现了叠加于宽发光带上的一系列明显的弱发射峰。不同温度生长的样品中,叠加峰的能量相同。同一样品中叠加峰的能量不随激发光波长的变化而变化。