草酸生产水洗塔设计

对目前国内合成法生产草酸所用水洗塔,采用加大水量到50m~3/h,提高塔板开孔率到19.55%(一般推荐6%～12%),降低溢流堰高为25mm,增大降液管到下层塔板间距为95mm 的办法,使洗涤后的气体达到要求。     

多夹层板壳的非线性理论及应用（Ⅲ）：扁壳的弯曲和稳定

本文根据文[1]获得的多夹层扁壳非线性基本方程，求解了各种载荷及边界条件下矩形底面多夹层扁壳的非线性弯曲问题，多夹层板、扁柱亮在轴向压力作用下的稳定问题，以及一般形状的扁壳在边界作用力下的变形．     

全息正弦式波带片特性研究

本文主要对全息正弦式波带片的形成及成像特性进行了详细的理论分析，并把它与传统的菲氏波带片及几何光学透镜作比较研究，从中获得正弦式波带片的焦距公式；ｆ＝λ１α／λ２。     

L角钢挡板塔盘吸收性能的试验研究

经氨空气水物系吸收性能试验表明,L 角钢挡板塔盘具有结构新颖简单、加工安装方便、生产能力大、板压降小、效率高、传热传质效果好等特点,是一推广应用的新塔型,并提出冒夫里板效率 E_(mv)和体积传质系数 K_(yv)的关联式.     

产生特殊聚焦图形的二元光学元件

通过面积编码将伽博（Gabor)波带片的透过率函数的余弦分布等效为二元分布，研制了能产生各种特殊聚焦图形的二元光学元件。根据透镜聚焦的物理原理制作的二元振幅型波带片可以方便地产生多种聚焦线，给出了相应的实验结果，并讨论了改善聚焦效果的优化条件。     

高压CMOS管工艺的设计、模拟和验证

模拟和验证了一种低成本的，以标准CMOS工艺为基础，无需对原工艺流程进行改动的高压工艺技术。讨论了低压器件中的各种击穿机理，相应提出了高压器件中所做出的改进，列举了该工艺技术中所用的特殊版图；对此工艺的应用性进行了二维的工艺和器件模拟；将模拟结果与实际测试结果进行了比较，验证了这种高压工艺技术的实用性。     

Charge plate technique in recoil study: Evidence for collection of recoil charged species from solid targets on metal electrodes

The occurrence of charge on recoil⁵⁶Mn produced by the (n,γ) reaction in polycrystalline potassium permanganate has been examined using the ‘charge plate technique’. From considerations of capture gamma ray decay schemes and internal conversion it appears that, in a condensed medium, the recoil atom develops charge after losing much of its initial kinetic energy which allows collection on charged electrodes. Preliminary findings were presented at the International Symposium on Radiochemistry and Radiation Chemistry, RC-41 BARC, Bombay, Feb. 4–6 (1991).     

中厚板矫直技术发展的现状与展望

介绍了国内外矫直技术与矫直设备的发展水平与方向 ,在简要介绍中厚板矫直机理的基础上 ,指出了目前我国中厚板矫直技术存在的一些差距与不足 ,为我国中厚板矫直设备的改造提供了一定的参考依据。     

Comparison of detection efficiencies of negatively charged gold-alkanethiolate-, gold-sulfur- and gold-clusters in ToF-SIMS

In order to improve quantification of high mass ions, the influence of cluster composition on detection efficiencies has been studied using a TOF-SIMS IV with the extended capability of postaccelerating ions up to 20 keV. In this experimental study, we focus on the comparison of detection efficiencies for three types of negatively charged secondary cluster ions: gold-alkanethiolate-clusters (Au_xM_y), gold-sulfur-clusters (Au_xS_y) and gold-clusters (Au_x). The clusters were sputtered from self-assembled monolayers of hexadecanethiols on gold substrates using 10 keV Ar⁺ primary ions. The detection efficiencies were derived on the basis of a function for the secondary electron yield and a fourth-order approximated Poisson probability distribution for electron propagation and amplification within the microchannel plate.In addition to the well-known dependence of detection efficiencies on ion mass and energy, which has already been studied for positively charged ions, we were able to show a similar behaviour for the investigated negatively charged secondary ions. We have observed major variations among the three types of clusters at similar mass and energy as predicted in a theoretical approach. The observed differences are due to the different composition of the investigated clusters which has a major influence on the kinetic ion induced electron emission within the microchannel plate. For the first time it was possible to experimentally verify these predictions for detection efficiencies.     

用测量模态阻尼和振型的方法对复合材料薄平板进行无损质量检测

复合材料薄平板经热压制成后,都需要进行质量检测。本文探索用测量模态阻尼和振型的方法,对复合材料薄平板的制作质量进行无损检测,作为对其它昂贵的无损检测方法的补充。略述用振动方法进行无损检测的原理,测量薄平板阻尼的方法以及提高测量精度的措施。还讨论在测量薄平板阻尼时可能遇到的一些特殊问题(如非线性刚度、拍、模态密集等问题);以云母基复合材料薄平板作为例子,从测量其阻尼和振型的结果,对这种板的制作质量进行讨论。