Intramolecular cyclization of 5-aryl-3-arylamino-4-benzoyl-1h-3-pyrrolin-2-ones to pyrrolo[3,4-<Emphasis Type="Italic">b</Emphasis>]quinolines

It has been shown that 5-aryl-3-arylamino-4-benzoyl-1H-3-pyrrolin-2-ones cyclize in the presence of conc. H₂SO₄ to give pyrrolo[3,4-b]quinolines.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1543–1545, October, 2004.     

Ionic liquid–modified cellulosic hydrogels for loading and sustained release of selenourea: an ensuing inhibition of tyrosinase activity

Cellulose-based hydrogel materials were prepared and modified with tannic acid and l-methionine using ionic liquid as the solvent. The gels were prepared to develop a sustained release medium for selenourea (SeU). The drug delivery characteristics of selenourea-loaded cellulose (CSeU), selenourea-loaded tannic acid-modified cellulose (CTSeU), and selenourea-loaded L-methionine-modified cellulose (CMSeU) were investigated in aqueous media and simulated gastric fluid (SGF) media. This modified gel beads have been characterized using field emission scanning electron microscope, X-ray energy-dispersive spectroscopy, Fourier transform infrared spectroscopy, thermogravimetry–differential thermal analysis and swelling properties and compared with those of the unmodified ones. We also investigated the inhibitory effects of SeU released from these gels on the activity of mushroom tyrosinase. Out of all the gel materials, CTSeU showed maximum SeU release both in water and SGF media. However, tyrosinase inhibitory action in PBS medium was comparable for all the three gel materials.     

New (1R,4R)-2-arylidene-p-menthan-3-ones with a bridging ester group in the arylidene fragment. Synthesis and behavior in liquid-crystalline systems

(1R,4R)-2-(4-Hydroxybenzylidene)- and (1R,4R)-2-(4"-hydroxybiphenyl-4-yl)methylene-p-menthan-3-ones were synthesized by condensation of (–)-menthone with O-tetrahydropyran-2-yl derivatives of 4-hydroxybenzaldehyde and 4"-hydroxy-4-formylbiphenyl, respectively, in a DMSO—base medium followed by the removal of the protective group. The reactions of these hydroxy derivatives with 4-alkylbenzoic, 4-alkyloxybenzoic, trans-4-alkylcyclohexane-4-carboxylic, and 4"-alkylbiphenyl-4-carboxylic acids afforded three series of new chiral esters. Compounds containing the arylidene moiety with three benzene rings were found to exhibit liquid-crystalline properties. The characteristic features of these compounds are discussed based on the results of studies by polarizing microscopy, differential scanning calorimetry, and small-angle X-ray scattering. It was found that the mesomorphic compounds under study can form a smectic A mesophase, twist grain boundary mesophases (TGBA), and blue phases in a wide temperature range. Upon dissolution of certain of chiral compounds in 4"-cyano-4-pentylbiphenyl, a rather high twisting power and the thermal stabilizing effect on mesophases were observed.     

Production ofL-glutamate oxidase andin situ monitoring of oxygen uptake in solid state fermentation ofstreptomyces sp. Nl

Effects of water content and carbon and nitrogen sources on the production ofL-glutamate oxidase (GOD) by solid state fermentation (SSF) ofStreptomyces sp. N₁ were investigated in a 250-mL shake flask. The results show that in the solid medium containing wheat bran 98% (w/w), KCl 0.2% (w/w), and MgCl₂ 0.2% (w/w), addition of 2.0-mL water per gram solid medium and 0.4% (w/w) (NH₄)₂SO₄ was the best for GOD production. In this work, we also developed a simple technique forin situ measuring oxygen uptake rate (OUR) and carbon dioxide evolution rate (CER) in SSF in a shake flask based on the principle of Warburg manometer. The method was successfully applied to determine OUR and CER values in SSF ofStreptomyces sp. N₁. The results indicate that the largest OUR value was detected about one or two days ahead of the highest GOD activity reached depending on the fermentation conditions, and the OUR may be used as anin situ indicator of GOD production in the SSF process.     

Preparation of Silicalite-1 Within Macroporous Silica Glass

Microcrystalline silicalite-1 was formed on the inner surface of macroporus silica glasses prepared by the sol-gel process. By heating a homogeneous precursor solution at 100°C under a hydrothermal condition, 2–5 m of plate-like particles of silicalite-1 were deposited. With an increase of mixing time of the precursor solution, the number of silicalite-1 particles increased, accompanied by the relative decrease of the particle size. Depending on the temperature and the duration of the heat-treatment of the macroporous silica, the amount of deposited silicalite-1 varied. Below 1000°C, the amount increased with the heat-treatment temperature, as a result of the competition between the precipitation of silicalite-1 and the dissolution of silica from the macroporous silica glass under a strongly basic condition. On the other hand, above 1000°C the amount of deposited silicalite-1 decreased in accordance with the decrease of the macropore diameter by the heat-treatment, because of the limited transport of the dissolved silicate species through the smaller macropores.     

1,3-Dipolar cycloaddition of cyclic α-methoxynitrones, derivatives of 2H-imidazole 1-oxide and 4H-imidazole 3-oxide

The reactions of cyclic aldo- and -methoxynitrones of the 2H-imidazole-1-oxide and 4H-imidazole 3-oxide series with isocyanates, phenyl isothiocyanate, N-phenylmaleimide, and dimethyl acetylenedicarboxylate were studied. The reactions give the corresponding 1,3-dipolar cycloaddition products. 2,2-Dimethyl-4-phenyl-2H-imidazole 1-oxide does not enter into a similar reaction with isocyanates or phenyl isothiocyanate.     

Synthesis, characterisation and evaluation of polydithiocarbamate resin supported on macroreticular styrene-divinylbenzene copolymer for the removal of trace and heavy metal ions

A new chelating resin was synthesised by the modification of styrene-divinylbenzene (2%) copolymer and incorporation of dithiocarbamate groups. The polydithiocarbamate resin was characterised by elemental analysis, thermal studies and IR studies. The analytical characteristics of the sorbent were established and optimum sorption conditions for Cu, Ni, Pb, Fe, As and Mn determined. The total sorption capacity of the resin was 37 mg g⁻¹ for Ni(II), 35 mg g⁻¹ for Cu(II), 29 mg g⁻¹ for Fe(III) and 23 mg g⁻¹ for Pb(II). The optimum pH for the removal of metal ions was 3-5 for Ni(II), 5 for Cu(II), 4 for Fe(III) and 4-5 for Pb(II). High sorption capacity was observed when compared with other conventional chelating polymers. The sorption kinetics was fairly rapid, as apparent from the loading half time t_1/2 values, indicating a better accessibility of the chelating sites.     

Detectability enhancement of spectrophotometric detectors by the use of multidimensional gas chromatography

Multidimensional gas chromatography (2D GC) is demonstrated as a way to improve limits of detectability of spectrophotometric detectors. UV and IR detectors are generally less sensitive than mass spectrometers or other GC detectors. This has placed some limitations on the useful capabilities provided by spectrophotometric detectors, such as the ability to provide structure‐related information for a particular analyte. In this paper, we report results from interfacing a 2D GC instrument to a UV detector. Symmetry factor and the ratio of retention time divided by peak width did not show deterioration of the quality of chromatography when a megabore column was used with this detector. Furthermore, an increase in the limits of detectability over that attainable in a single‐column system was realized by using the 2D GC system. However, the low flow (1 mL/min) imposed by the use of a microbore column (250 μm ID) caused significant tailing when the UV detector was used.     

Aminolysis of 2-Aryl-5-R-5,6-dihydro-7H-[1,2,4]triazolo[5,1-<Emphasis Type="Italic">b</Emphasis>]1,3]thiazin-7-ones

We have established that the products of aminolysis of 2-aryl-5-R-5,6-dihydro-7H-[1,2,4]triazolo-[5,1-b][1,3]thiazin-7-ones in boiling ethanol are 3-R-3-(5-aryl-4H-1,2,4-triazol-3-ylsulfanyl)-propanamides, and at 180°C–210°C (depending on the structure of the substituent R): 3-phenyl-4,5-dihydro-1H-1,2,4-triazoline-5-thione and 3-arylacrylamides or 3-(3-aryl-5-thioxo-4,5-dihydro-1H-1,2,4-triazol-1-yl)propanamides. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1587–1592, October, 2005.     

Titania-supported mixed HPMoV polyoxometallates as precursors of hydrodesulfurization catalysts

HDS catalysts were prepared by loading H₃PMo₁₂O₄₀ or H₄PMo₁₁V₁O₄₀ polyoxometallates on TiO₂ (0.5 and 1.0 mmol (Mo+V)). Activity of the catalysts was tested in the HDS of thiophene. The activity of catalysts of low concentration was 2–3 times higher than the activity of those of high concentration. Temperature programmed reduction (TPR) and IR spectroscopy were used to determine the properties of the catalyst. TPR measurements proved that vanadium promotes and stabilizes HDS activity due to an increase in the Mo⁵⁺/Mo⁴⁺ ratio.