链珠状氢氧化亚镍的准电容特性及其在复合型超电容器中的应用(英)

本文采用溶胶凝聚方法制备了超细氢氧化亚镍电极材料并通过在其中掺加适量碳纳米管的方法大大提高了电极的比容量并有效改善了电极材料的阻抗特性。掺有20%碳纳米管的氢氧化亚镍复合电极材料的单电极比容量可达到320 F·g^-1。本文分别采用氢氧化亚镍/碳纳米管复合电极作为正极，活性炭作为负极，6 mol·L^-1 KOH作为电解液制备了复合型电化学电容器。采用上述方法制备的复合型电容器工作电压达到1.6 V，电容器质量比容量达到60 F·g^-1。复合型电容器能量密度达到20.11 Wh·kg^-1，最大功率密度达到8.6 kW·kg^-1,兼具高能量特性和优良的大电流放电特性。     

A novel Fe（OH）3/TiO2 nanoparticles and its high photocatalytic activity

A very simple and controllable approach was proposed to synthesize novel Fe(OH)_3/TiO_2 nanoparticles.Compared with neat TiO2,the Fe(OH)_3/TiO_2 increased the rate of the photocatalytic degradation of methyl orange at pH 6.0 by more than five times, showing photocatalytic activity as excellent as P25.This enhancing effect is mainly attributed to the ferric hydroxide deposits as the electron scavenger and the enriched surface hydroxyl groups.     

Organically pillared layered zinc hydroxides

The two organically pillared layered zinc hydroxides [Zn₂(OH)₂(ndc)], CPO-6, and [Zn₃(OH)₄(bpdc)], CPO-7, were obtained in hydrothermal reactions between 2,6-naphthalenedicarboxylic acid (ndc) and zinc nitrate (CPO-6) and 4,4′biphenyldicarboxylate (bpdc) and zinc nitrate (CPO-7), respectively. In CPO-6, the tetrahedral zinc atoms are connected by two μ₂-OH groups and two carboxylate oxygen atoms, forming infinite layers extending parallel to the bc-plane. These layers are pillared by ndc to form a three-dimensional structure. In CPO-7, the zinc hydroxide layers are containing four-, five- and six coordinated zinc atoms, and the layers are built like stairways running along the [001] direction. Each step is composed of three infinite chains running in the [010] direction. Both crystal structures were solved from conventional single crystal data. Crystal data for CPO-6: Monoclinic space group P2₁/c (No. 14), a=11.9703(7), b=7.8154(5), c=6.2428(4) Å, β=90.816(2)°, V=583.97(6) Å³ and Z=4. Crystal data for CPO-7: Monoclinic space group C2/c (No. 15), a=35.220(4), b=6.2658(8), c=14.8888(17) Å, β=112.580(4)°, V=3033.8(6) Å³ and Z=8. The compounds were further characterized by thermogravimetric- and chemical analysis.     

CsOH-promoted epoxide ring-opening with phosphines: mild and efficient synthesis of monohydroxyphosphines

A mild and convenient synthesis of monohydroxyphosphines has been achieved by epoxide ring-opening using primary or secondary phosphines in the presence of cesium hydroxide, 4 Å molecular sieves and DMF at room temperature. These reaction conditions were found to be highly regio- and stereoselective producing various monohydroxyphosphines exclusively in moderate to high yields.     

A new approach for the synthesis of K-free nickel hexacyanoferrate

A Ni, Al hydrotalcite-like compound (Htlc) has been proven an useful host material for an alternative synthesis of a K⁺-free mixed hexacyanoferrate Ni_1.5Fe^III(CN)₆, which is very difficult to obtain in bulk. The first stage of the procedure consists in the intercalation of hexacyanoferrate(III) inside the Htlc structure. The intercalated Htlc has been treated with a NiNO₃ solution. The obtained material has been characterized by XRD, XAS Raman and FT-IR spectroscopy. The voltammetric response of the compound obtained after the complete solubilization of the Htlc host shows a typical fingerprint of nickel hexacyanoferrate material with a very low level of potassium. Elemental analysis confirmed the absence of K⁺ and thus the occurrence of K⁺-free nickel hexacyanoferrate (14% yield).     

Aggregation effects on evaporation and the air/water interface of dodecyltrimethylammonium hydroxide solutions

 The system dodecyltrimethylammonium hydroxide (DTAOH)–water was studied by surface tension, ion-selective electrodes and evaporation in an electrobalance. Results confirmed earlier conclusions about a stepwise aggregation mechanism in DTAOH solutions. The aggregation process started at a total concentration C _T=(2.51±0.10)×10^-4 mol dm^-3) which probably corresponds to the formation of dimers. At C _T= (1.300±0.041)×10^-3 mol dm^-3 there was a change in the surface and evaporation behavior, corresponding to the formation of small, fully ionized aggregates which grew with increasing concentration. At C _T= (1.108±0.010)×10^-2 mol dm^-3 the formation of true micelles with hydroxide counterions in the Stern layer did not change significantly the evaporation and adsorption behavior. This means that between this concentration and C _T=(3.02±0.28)× M28.8n10^-2 mol dm^-3, the changes in structure were gradual. At the latter concentration there was a sudden change in the monolayer state at the air/water interface, with a strong surfactant desorption, and a major change in evaporation behavior. The changes are compatible with the formation of few, large aggregates reducing the total concentration of kinetically independent solute units, which in turn increased the activity of the solvent. This phenomenon is in agreement with literature information. The reduction in the evaporation rate of water was mainly due to the reduction of the water activity, caused by colligative effects. The reduction of the effective area available for evaporation had only a slight effect in water evaporation. Received: 9 January 1997 Accepted: 19 October 1997     

Spectrophotometric determination of aluminum and copper ions using spadns

Aluminum and copper ions are selectively estimated spectrophotometrically. These ions form colored complexes with spadns which have a maximum absorbance at 580 nm. The complexes formed with both cations are stable and pH dependant; aluminum is favorably complexed at pH 5, while copper is complexed at pH 7.The percentage recoveries were found to be 99.69 ± 0.75 and 99.32 ± 0.6 with a minimum detection limit of 0.08 and 0.23 g ml^–1 for aluminum and copper ions respectively. There is insignificant interference from the 10-fold concentrations of other metal ions under the proposed reaction conditions.     

Zur Kristallstruktur von CaLaAl3O7 und CaLaGa3−xAlxO7 (x = 0,66)

On the Crystal Structure of CaLaAl₃O₇ and CaLaGa_3?xAl_xO₇ (x = 0.66) Single crystals of (I): CaLaAl₃O₇ and (II): CaLaGa_2.34Al_0.66O₇ were grown from molten oxide mixtures and investigated by single crystal X-ray technique. Both compounds crystallize with tetragonal symmetry, space group D? P4 2₁m, (I): a = 7.8075; c = 5.1564 Å, (II): a = 7.9130, c = 5.2360 Å, Z = 2 and are isostructural with the Melilites. The crystal structure is discussed.     

Construction of database of effective energy‐loss functions

Effective energy‐loss functions for Al, Cu, Ag and Au were derived from the reflection electron energy‐loss spectroscopy (REELS) spectra for 1 keV electrons using extended Landau theory. Features of the obtained effective energy‐loss functions are close to those of optical surface energy‐loss functions, revealing the significant contribution of the low energy loss below a few tens of electron‐volts in the REELS spectrum for Cu, Ag and Au. The REELS spectra were reproduced using the newly derived effective energy‐loss functions, leading to the confirmation that this type of database of the effective energy‐loss function is very useful not only for more comprehensive understanding of the measured spectrum of surface electron spectroscopies but also for practical background subtraction in surface electron spectroscopy. Copyright © 2003 John Wiley & Sons, Ltd.     

Analysis of Toxic Aluminium Species in Natural Waters

Aluminium is known to be toxic to a wide range of aquatic organisms under certain conditions. Monomeric hydroxy ions have been found to be primarily responsible for aluminium aquatic toxicity.A survey of aluminium toxicity and a brief discussion of speciation schemes are presented. The fast reaction of Al³⁺ with pyrocatechol violet (PCV) followed by spectrophotometric analysis is a frequently used method for aluminium speciation. By using a flow system, one obtains fairly exact and reproducible control of the reaction time, and as a result it provides a direct method of analysis for free aluminium (including inorganic monomeric aluminium).The PCV-method has been adapted for the determination of aluminium in carbonate-rich natural waters using an improved buffering system. Thus it is possible to monitor aluminium concentrations in lake water as well as in pore water of the sediments of eutrophicated hardwater lakes that has been treated with aluminium salts as a restoration measure.