比值光谱导数法同时测定铝合金中铁,铜,锌

用比值光谱－导数分光光度法，在ｐＨ５．５缓冲溶液中，利用金属－２－（５－溴－２－吡啶偶氮）－５－二乙氨基酚（５－Ｂｒ－ＰＡＤＡＰ）－ＯＰ三元络合物显色体系，对混合物中铁，铜，锌三组分进行了同时测定。合成试样５次测定回收率在９７．３％－１０４．４％之间。应用于铝合金中铁，铜，锌的测定，各６次测定的ＲＳＤ分别为３．６６％，１．３８％，２．０３％。     

8-羟基喹哪啶固相萃取光度法测定水样中的铁

研究了8-羟基喹哪啶与铁的显色反应，在pH为8．0的氯化氨-氨水缓冲介质中，在十六烷基三甲基溴化铵(CTMAB)存在下，8-羟基喹哪啶与铁反应生成3：1稳定的蓝紫色络合物，该络合物可被Waters Sep-Park-C18固相萃取小柱萃取，用乙醇洗脱后用光度法测定，络合物λmax=600nm。在此波长下其它金属离子的络合物无光吸收，对铁选择性很好，铁含量在0-5mg/L内符合比尔定律，方法用于水样中痕量铁的测定，结果令人满意。     

5,15-二(对-取代苯基)八烷基卟啉及其金属配合物的合成

本文报道了五种5,15-二(对-取代苯基)-2,8,12,18-四乙基-3,7,13,17-四甲基卟啉(Ⅱa—Ⅱe)和五种5,15-二(对-取代苯基)-2,3,7,8,12,13,17,18-八甲基卟啉(Ⅰa—Ⅰe)以及它们的铜、铁、镍金属配合物的合成。这些化合物的结构均经元素分析、UV、~1HNMR和MS鉴定。芳环上不同取代基对卟啉成环反应有一定影响,拉电子基团有利于反应。其顺序如下:NO_2>H>CH_3>OCH_3>N(CH_3)_2。     

铁系元素冠醚配合物的研究——V.三氯化铁与4′-溴苯并-15-冠-5固态配合物的合成和性质

本文报导了三氯化铁(水合物)与4′-溴苯并-15-冠-5(L)固态配合物的合成,对合成的新配合物,进行了元素定量分析及摩尔电导测定,并作了红外光谱、紫外光谱,热重和差热以及X-射线粉末衍射分析的性质表征。从而证明,该配合物中FeCl₃与配体L比为1:1,是溶化剂,含有结晶水的固态配合物。     

紫外分光光度法测定中草药中铁的含量

对白芍、党参、白术、茵陈、天冬、枸杞子、当归、菟丝子、金银花、桔梗中微量元素铁的含量进行了测定,为进一步研究其药理作用提供基础。中草药消化后配制成溶液,用邻二氮菲作显色剂,使用UV-1200型紫外分光光度计在510 nm处测定各样品的吸光度(A),求出样品中微量元素铁的含量。结果显示,当归和金银花中铁的含量较丰富,分别为(135.367 8±0.111 1)μg/g和(125.936 4±0.159 9)μg/g;桔梗含铁量最少,为(3.510 9±0.159 9)μg/g,10种中草药中铁含量有显著性差异(P<0.05)。结果为使用中草药治疗系统疾病提供了可靠数据,10种中草药在用量范围内Fe含量适合人体每天正常摄入量。     

On the symmetry of iron(III) tris-acetylacetonate crystals

The crystal structure of iron tris-acetylacetonate is re-determined. Crystal data at 293 K are: a = 15.4524(5) Å, b = 13.5876(4) Å, c = 16.5729(7) Å, Z = 8; at 150 K: a = 15.2541(4) Å, b = 13.4451(3) Å, c = 16.4256(5) Å, Z = 8. The structure is molecular and comprises isolated molecules. The coordination polyhderon of iron is an almost regular octahedron, Fe-O bond lengths are 1.977–2.003 Å (293 K) and 1.982–2.006 Å (150 K). In the crystalline state, the molecules are arranged in layers, and iron atoms are located on a plane yielding an almost regular trigonal net with the Fe...Fe separations of 7.558–8.103 Å (293 K) and 7.472–8.017 Å (150 K). The adjacent layer is positioned exactly over the first one with a Fe...Fe distance of 8.303 Å (293 K) and 8.236 Å (150 K).     

Comparison of slurry sampling and microwave-assisted digestion for calcium, magnesium, iron, copper and zinc determination in fish tissue samples by flame atomic absorption spectrometry

The development of a slurry sampling method for the determination of calcium, copper, iron, magnesium and zinc in fish tissue samples by flame atomic absorption spectrometry is described. In comparison with microwave-assisted digestion, the proposed method is simple, requires short time and eliminates total sample dissolution before analysis. Suspension medium was optimized for each analyte to obtain quantitative recoveries from fish tissue samples without matrix interferences. Nevertheless, iron recoveries higher than 46% were not found. Treatment of samples slurried in nitric acid by microwave irradiation for 15-30 s at 75-285 W permitted to achieve efficient recoveries for calcium, iron, magnesium and zinc. Further improvement in the matrix effects for iron determination was accomplished by the use of an additional step of short microwave-assisted suspension treatment. However, standard addition method was required for calcium and copper determination, being necessary hydrochloric acid as suspension medium for the last one. Although copper could not be determined in the certified reference material using microwave-assisted digestion, the accuracy of the slurry sampling method was verified for all the investigated analytes. Detection limits were 22.8 ± 8.0, 0.884 ± 0.092, 5.07 ± 0.76, 35.5 ± 0.7 and 1.17 ± 0.04 μg g⁻¹ for calcium, copper, iron, magnesium and zinc, respectively. The standard deviations obtained using slurry sampling method and microwave-assisted digestion were not significantly different, and the mean relative standard deviation of the over-all method (n = 3) of the slurry sampling method for different concentration levels was below 12%.     

Preparation and Crystal Structure of Potassium Iron Hydrogen Phosphate,KFe3(HPO4)2(H2PO4)6 · 4 H2O

Single crystals of potassium iron hydrogen phosphate, KFe₃(HPO₄)₂(H₂PO₄)₆ · 4 H₂O, were prepared hydrothermally by heating a mixture of Fe₂O₃, H₃PO₄ and K₂CO₃ with a small amount of water. It crystallizes monoclinic, space group C2/c (N° 15 Int. Tab.) with Z = 4 and a = 1701(2), b = 960.4(5), c = 1750(1) pm, β = 90.88(7)°. The crystal structure was solved by using 1716 unique reflections F₀ > 4σ(F₀) with a final wR2 value of 0.126 (SHELXL-93). The main feature of the crystal structure are layers formed by PO₄-tetrahedra around the FeO₆-octahedra parallel to (001). K⁺ and H₂O molecules connect these layers. Effective Coordination Numbers (ECoN), Mean Fictive Ionic Radii (MEFIR), Charge Distribution (CHARDI) and the Madelung Part of Lattice Energy (MAPLE) are calculated for the title compound. The existence of hydrogen bonds is confirmed by these calculations.     

合成气制乙醇的铑基催化剂中助剂铁,锂的作用本质研究

催化活性测试表明,助剂Fe具有显著提高乙醇生成选择性及铑催化活性的双重作用;助剂Li具有显著提高乙醇选择性的作用,对铑催化活性影响不大。基于H_2/D_2同位素效应结果及CO化学吸附、IR、XRD、XPS等的表征结果,认为助剂Fe经活化处理后大部分与Rh形成RhFe合金,使Rh分散度显著提高,从而提高了乙醇的选择性;Rh分散度的提高以及小部分以Fe~(2+)(Fe~(3+))形式存在的助剂Fe促进甲酰基的生成及随后的氢解断C-O键反应是助剂Fe促使铑催化活性提高的两个因素。Li的主要作用在于通过与C_2含氧中间体乙烯酮氧端的弱亲合作用,促进了乙醇前驱体的生成,从而使乙醇生成选择性提高。     

Mössbauer Spectroscopic Studies of Supported α-Fe2O3 and Fe Catalysts II: The Effect of the Second Metal Addition

The effect of the addition of a second metals such as Zn and Ni on the calcinaton and reduction of alumina, magnesia and silicasupported iron catalysis with total iron loading of 5wt% is investigated by Mössbauer spectroscopy. It is shown that the reducibility of supported α-Fe₂O₃ is gradually increased by adding the second metal. The values of the magnetic hyperfine field obtained from Mössbauer spectra for the Zn or Ni-added α-Fe₂O₃ or Fe catalysts decreased with increasing second metal loading.