气相色谱仪的技术指标测算方法

通过对气相色谱各项技术指标及意义的介绍，使应用者娴熟地掌握气相色谱的各项技术指标和测算方法，正确的表达分析检测结果。     

Sol-Gel Particulate Float Process to Make Vitreous Silica Bodies

Particulate sol-gel technology uses larger particles than that of alkoxide-derived gels and provides larger pore sizes in the gelled object. This allows relatively rapid drying and fabrication of large rods or tubular shapes. However, the formation of more complex or flat shapes, which require extensive surface contact with a mold, is more difficult. The shrinkage during drying, with the significantly greater stress of surface friction due to adhesion, frequently leads to cracking.We have demonstrated a solution to this problem by floating the gel on the surface of a dense liquid. Dry silica panels up to 28 × 40 × 0.7 cm³ were prepared in this way. The use of patterning molds allowed the fabrication of more sophisticated shapes. These bodies were sintered to transparent vitreous silica articles of near net dimensions.     

Inorganic Sol-Gel Preparation of Medium Sized Microparticles of Li2TiO3 from TiCl4 as Tritium Breeding Material for Fusion Reactors

Microspheres of Li₂TiO₃ were fabricated by a classical, inorganic sol-gel process from commercially available TiCl₄. Elaborated process consists of the following main steps: (1) dissolving of TiCl₄ in concentrated aqueous HCl and addition of LiOH; (2) formation of sol emulsion in 2-ethylhexanol-1 containing the surfactant SPAN-80 (EH); (3) gelation of emulsion drops by extraction of water with partially dehydrated EH; (4) impregnation of gel to Li:Ti molar ratio MR = 2; (5) thermal treatment at 1200°C in order to receive chloride free product. This temperature can be significantly lowered (to 750°C) by dechlorination starting solution TiCl₄ by chemical treatment of the with nitric acid to form of nitrate-stabilized titania sols. Tritium release from sol-gel made Li₂TiO₃ microspheres were found very close to that observed for other traditional materials, however for the first sample process starts slightly earlier.     

Fluctuation Theory for a Three-Dimensional Model of Maxwellian Molecules

Under suitable assumptions, a functional central limit theorem is obtained for a three-dimensional model of Maxwellian molecules. This model is related to a nonlinear Boltzmann-type equation. It will be proved that the family of the distributions induced by fluctuation processes converges weakly.     

Effect of Nuclear Binding Energy to K Factor

We modify the square of virtual photon four-momentum by using nuclear binding energy formula, and calculate the effect of nuclear binding energy to K factor and Compton subprocess and annihilate subprocess in A-A collision Drell-Yan process. The outcome indicates that the effect of nuclear binding energy to K factor is obvious in little x region and it would disappear gradually as x increases.     

10-对硝基苯氧基癸酸合成工艺的改进

对10-对硝基苯氧基癸酸合成工艺进行了改进.以10-溴代癸酸为原料,与甲醇反应生成10-溴代癸酸甲酯,再与对硝基酚钠反应生成10-对硝基苯氧基癸酸甲酯,最后以固定化脂肪酶水解得到10-对硝基苯氧基癸酸.对中间体的折光率和紫外-可见光谱进行分析,并通过紫外-可见光谱1、H-NMR和13C-NMR以及酶分析应用对最终产物进行确证.结果表明,成功合成出目标化合物,总收率达到71.6%.     

论非营利组织诚信缺失的治理

阐述了非营利组织诚信缺失造成的危害和影响,分析了非营利组织诚信缺失的原因,提出了非营利组织诚信缺失的治理对策。     

中碳钙硫易切削钢夹杂物形态控制

在实验室进行了1 kg坩埚实验,研究了中碳高硫结构钢钙处理前后夹杂物的形态、尺寸及组?结果表明:钢钙处理后获得了可以改善钢切削性的纺锤形夹杂物,夹杂物的平均纺锤形率为68.11%,并且随钢中[Ca]/[S]增加夹杂物纺锤形化趋势增加;钙处理后小于2.5 μm的夹杂物占夹杂物总量的76.05%,夹杂物细小、弥散分布于钢基体中;夹杂物类型以钙铝酸盐芯硫化物外壳的复合夹杂物、(Mn,Ca)S形式的硫化物为主,有少量的铝酸钙与CaS的复合夹杂物;含钙硫的45钢铸态钢锭比普通45钢铸态钢锭切削性能有所改善.     

The first encapsulation of hydroxynitrile lyase from Hevea brasiliensis in a sol-gel matrix

A straightforward process for the encapsulation of HbHNL under low methanol conditions has been developed. By adding a sol, prepared by hydrolysis of TMOS/MTMS at pH 2.8 with continuous removal of methanol, to a stirred solution of the enzyme in a buffer at pH 6.5, at least 65% of the activity of the free enzyme could be recovered after the encapsulation. The aquagels were successfully used in the synthesis of (S)-cyanohydrins.