二氧化氯在炼油循环水中的杀菌除泥作用

采用强氧化剂二氧化氯对炼油循环水进行杀菌灭藻、除垢和减缓腐蚀现场试验研究 ,且对试验结果进行了分析 .结果表明 :稳定性二氧化氯可有效控制炼油循环水中微生物量 ,加药量约 1mg/L ,2 4h后杀菌率达 10 0 % ;同时减少粘泥在热交换设备上的形成 ,有效除去污垢 ,使缓蚀剂发挥作用 ,腐蚀速率明显减小 (小于 0 .1mm /a) ,循环水浊度小于 10mg/L ;加药量小于 1mg/L时其对有机磷水稳定剂的影响小 .     

Transport of surface-modified iron nanoparticle in porous media and application to arsenic(III) remediation

The surface-modified iron nanoparticles (S-INP) were synthesized, characterized and tested for the remediation of arsenite (As(III)), a well known toxic groundwater contaminant of concern. The S-INP material was fully dispersed in the aqueous phase with a particle size distribution of 2–10 nm estimated from high-resolution transmission electron microscopy (HR-TEM). X-ray photoelectron spectroscopy (XPS) revealed that an Fe(III) oxide surface film was present on S-INP in addition to the bulk zero-valent Fe⁰ oxidation state. Transport of S-INP through porous media packed in 10 cm length column showed particle breakthroughs of 22.1, 47.4 and 60 pore volumes in glass beads, unbaked sand, and baked sand, respectively. Un-modified INP was immobile and aggregated on porous media surfaces in the column inlet area. Results using S-INP pretreated 10 cm sand-packed columns containing ∼2 g of S-INP showed that 100 % of As(III) was removed from influent solutions (flow rate 1.8 mL min⁻¹) containing 0.2, 0.5 and 1.0 mg L⁻¹ As(III) for 9, 7 and 4 days providing 23.3, 20.7 and 10.4 L of arsenic free water, respectively. In addition, it was found that 100% of As(III) in 0.5 mg/L solution (flow rate 1.8 mL min⁻¹) was removed by S-INP pretreated 50 cm sand packed column containing 12 g of S-INP for more than 2.5 months providing 194.4 L of arsenic free water. Field emission scanning electron microscopy (FE-SEM) showed S-INP had transformed to elongated, rod-like shaped corrosion product particles after reaction with As(III) in the presence of sand. These results suggest that S-INP has great potential to be used as a mobile, injectable reactive material for in-situ sandy groundwater aquifer treatment of As(III).     

解释学习在机器人过程控制中的应用

机器人过程控制是智能机器人系统的一个特别重要而又十分复杂的研究课题。本文将解释学习应用于机器人过程控制，为之开发了一种新的方法。仿真结果表明，该方法可行、有效。同时，还尝试了将Ｐｒｏｌｏｇ语言作为机器人过程控制的运行机制的形式化表达工具的可能性。     

Procedure Design to Fulfill Quality Management System

With the application of the principle of PDCA, and dr awing on the experience of the process methods of the ISO9000 and the system met hods of management, the author analyses the basic requirement to fulfill quality management system in enterprises. Then the author inquires into the procedure t o establish the efficiency quality management system. Finally four stages (plan, do, check, action) and eight steps (decision, plan, analyze, design, do, check, improve, fulfill) are put forward to fulfill qualit...     

Internal Rotation of the Methyl Group in Cations of Toluene Derivatives

The potential of the internal rotation of the methyl group was determined for o-, m-, and p-fluorotoluene cations by pulsed field ionization spectroscopy. The potential of the internal rotational motion was also surveyed for other toluene derivative cations. It was found that the barrier height generally increases by ionization. The increase in the barrier height has been discussed in connection with the reduction of the internal rotational constant B by ionization. The geometrical distortion of the methyl group during the internal rotation has been suggested.     

A molecular network model to describe the nonlinear viscoelastic behavior of polymers

A transient molecular network model is built to describe the nonlinear viscoelasticity of polymers by considering the effect of entanglement loss and regeneration on the relaxation of molecular strands. It is an extension of previous network theories. The experimental data on three thermoplastic polymers (ABS, PVC and PA6) obtained under various loading conditions are used to test the model. Agreement between the theoretical and experimental curves shows that the suggested model can describe successfully the relaxation behavior of the thermoplastic polymers under different loading rates by using relatively few relaxation modes. Thus the micromechanism responsible for strain-rate dependence of relaxation process and the origin of nonlinear viscoelasticity may be disclosed. The project supported by the National Natural Science Foundation of China and Doctorial Fund     

光学薄膜在现代汽车工业中的应用

本文论述应用光学薄膜技术对汽车窗口玻璃和塑料的若干性能进行改进的技术发展水平，这些性能包括塑料表面的硬化，红外区的反射，紫外区的吸收，偏振化作用，双折射，憎水性以及光学角度选择性等，评论等离子体处理和物理蒸汽淀积薄膜工艺近来应用的一些例子。对于物理蒸汽淀积薄膜所提供的异常功能连同实际使用中它们的耐久性作了特殊的强调。     

露天矿爆破后煤岩块度分布自动测试系统的模型研究

介绍了采用单图片摄影测量和计算机图像处理的方法．分析露天矿爆破后煤岩块度分布的模型研究原理、过程和结果．     

对异步机数学模型中一些问题的研究

本文推导异步机在d、q、O系统中的磁链方程时,将气隙磁场与漏磁场分开考虑,并根据各自特点采取了不同的处理方法,从而简化了推导过程,考虑到异步机与同步机及一般化电机在结构上的差异,在研究异步机的功率平衡时,利用等效电路的概念,进一步阐明了瞬变过程中异步机的功率平衡关系。     

浅析个体软件过程(PSP)

介绍和分析了PSP的基本概念、作用和进化框架等内容 ,给出了PSP和CMM之间的联系 .CMM被软件业界公认为是当前最好的软件过程 ,PSP是CMM在软件工程师等级上的应用 ,是针对个体软件过程的改进 .