Effect of aging time on properties of acrylic impact modifier modified bisphenol A polycarbonate

Polycarbonate (PC) was blended with acrylic impact modifiers (AIMs). The effects of modifiers weight fraction on the Izod impact strength and yield strength of PC/AIM blends were investigated. The samples with 4% modifiers were aged under the T_g of PC in an air‐circulating oven, and the effects of aging time on impact strength, yield strength, modulus, elongation at break, post yield stress drop (PYSD) values, and morphology of fracture surface were investigated. The effects of aging time on the shape of stress–strain curve were also investigated. The aged samples were heat‐treated over the T_g of PC to erase the effects of physical aging. It was found that the drop of impact strength caused by physical aging can be recovered, the increment of yield strength and PYSD value caused by physical aging can only be partly recovered, and the heat‐treatment over the T_g of PC caused further increment of modulus. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2715–2724, 2005     

新疆县域经济发展水平差异趋势分析与预测

区域经济差异是区域经济学研究的核心内容之一。本文采用趋势外推预测法和时间序列分析预测法对新疆县域经济发展水平的绝对差异和相对差异的变化趋势进行了预测，结果表明．绝对差异在。十五”期间会有较大幅度的扩大．扩大幅度大致会在50％以上；相对差异在“十五”期间会有较大幅度的扩大，扩大幅度大致在10％以上。政府与社会各界都应该对县域经济发展水平差异扩大的态势和趋势加以重视。     

Luminescence of porous silicon derived nanocrystals dispersed in water: dependence on initial porous silicon oxidation

Aqueous solutions of silicon nanocrystals have been obtained, by sonication, from porous Si (p-Si) aged in air for various times. The photoluminescence of these solutions changes with the aging time of p-Si. These changes correlate with nanocrystal core dimensions, i.e. with the oxidation of the nanocrystals. Infrared spectra show that the reaction with water depends on the age of the starting p-Si sample, since the native superficial oxide layer on p-Si inhibits these reactions.     

《牡丹亭》之“情源”

《牡丹亭》以奇谲瑰丽之姿，演绎了人间之至情。纵观历史上同类题材，自能发现它的继承和超越之处。同时，明代“心学”思潮的影响也起了推波助澜的作用。文章试从“人间爱情的升华”、“离魂模式的借鉴”和“时代思潮的影响”三个方面对《牡丹亭》之“情源”做一番简要的探悉。     

Aging, rejuvenation and memory phenomena in spin glasses

In this paper, we review several important features of the out-of-equilibrium dynamics of spin glasses. Starting with the simplest experiments, we discuss the scaling laws used to describe the isothermal aging observed in spin glasses after a quench down to the low-temperature phase. We report in particular new results on the sub-aging behaviour of spin glasses. We then discuss the rejuvenation and memory effects observed when a spin glass is submitted to temperature variations during aging, from the point of view of both energy landscape pictures and real-space pictures. We highlight the fact that both approaches point out the necessity of hierarchical processes involved in aging. Finally, we report an investigation of the effect of small temperature variations on aging in spin glass samples with various anisotropies which indicates that this hierarchy depends on the spin anisotropy.     

Deformational Properties of Polymer Concrete during Long-Term Exposure to Water

Changes in the elastic and viscoelastic (creep) characteristics of polymer concrete and its structural components (polyester resin, unfilled or filled with diabase flour) during a long-term exposure to water at 20°C were studied. Modeling the structural changes in polymer concrete with time showed an increase in the relative volume content of pores filled with water and a decrease in that of unfilled pores. Based on the free-volume concept and the data on swelling due to moistening and shrinkage due to physical aging of the binder, a rather accurate estimate of the time-moisture reduction function for polymer concrete was obtained. The function was found to be nonmonotonic: the interval of increase was followed by an interval of decrease.     

Evaluation of long‐term performance of antioxidants using prooxidants instead of thermal acceleration

Evaluation of stabilization efficiencies of different antioxidants in polymers at low temperature and relatively short time was performed using incorporation of a prooxidant for catalytic oxidation. Comparisons were made between polypropylene films stabilized with primary antioxidants (Irganox 1076, Irganox 1010, and α‐tocopherol), with or without the prooxidant manganese stearate at different temperatures. A faster degradation was obtained in the presence of a prooxidant than without it. The relative efficiency of the antioxidants at prooxidant acceleration correlated better to low temperature long‐term test than at the thermal acceleration. The results were affected by initial differences in the amounts of the antioxidants present after the processing of the films. These differences were corrected for by a recalculation using microwave‐assisted extraction (MAE) and high performance liquid chromatography analysis from the exponential decrease in the amount of antioxidant in the films. The fastest comparison of the antioxidants efficiency was obtained from oxidation induction times, using total luminescence intensity measurements, but reliable results could also be obtained from the time to apparent failure. © 2005 Wiley Periodicals,Inc. J Polym Sci Part A: Polym Chem 43: 4537–4546, 2005     

浅谈数字图书馆的建设

文章从数字图书馆的定义出发 ,阐述了数字图书馆建设的的基本原则、主体思想与内部运行机制     

教师教育的嬗变与走向

教师是一项光荣而又传统的职业，也必定是一项基业常青的职业。在教师培养与发展的历史长河中，体现出由经验化向专业化、封闭型向开放型、终结性向终身性、知识型向复合型、学科性向实践性等发展的走向。     

Physical aging studies in epoxy resins. I. Kinetics of the enthalpy relaxation process in a fully cured epoxy resin

The physical aging of an epoxy resin based on diglycidyl ether of bisphenol-A cured by a hardener derived from phthalic anhydride has been studied by differential scanning calorimetry. The isothermal curing of the epoxy resin was carried out in one step at 130°C for 8 h, obtaining a fully cured resin whose glass transition was at 98.9°C. Samples were aged at temperatures between 50 and 100°C for periods of time from 15 min to a maximum of 1680 h. The extent of physical aging has been measured by the area of the endothermic peak which appears below and within the glass transition region. The enthalpy relaxation was found to increase gradually with aging time to a limiting value where structural equilibrium is reached. However, this structural equilibrium was reached experimentally only at an aging temperature of T_g-10°C. The kinetics of enthalpy relaxation was analysed in terms of the effective relaxation time τ_eff. The rate of relaxation of the system given by 1/τ_eff decreases as the system approaches equilibrium, as the enthalpy relaxation tends to its limiting value. Single phenomenological approaches were applied to enthalpy relaxation data. Assuming a separate dependence of temperature and structure on τ, three characteristic parameters of the enthalpic relaxation process were obtained (In A = ?333, E_H = 1020 kJ/mol, C = 2.1 g/J). Comparisons with experimental data show some discrepancies at aging temperatures of 50 and 60°C, where sub-T_g peaks appears. These discrepancies probably arise from the fact that the model assumes a single relaxation time. A better fit to aging data was obtained when a Williams-Watts function was applied. The values of the nonexponential parameter β were slightly dependent on temperature, and the characteristic time was found to decrease with temperature. © 1994 John Wiley & Sons, Inc.