High-throughput concept for tailoring switchable mirrors

The optical properties, the switching kinetics and the lifetime of hydrogen switchable mirrors based on Mg-Ni alloys are determined with particular regard to the composition of the optically active metal-hydride layer in combination with the thickness of the catalytic capping layer. For this, a high-throughput experiment is introduced. The switching kinetics and the reversibility of switchable mirrors are strongly thickness dependent, though the details hinge on the fine structure of the clustered capping layer. Therefore, the kinetics is correlated with the surface structures of Pd on Mg_yNi_1−y as investigated by scanning tunneling microscopy. The results are explained by the so-called strong metal-support interaction (SMSI) state, characterized by a complete encapsulation of the capping layer clusters by oxidized species originating from the support. The SMSI-effect is less important with increasing Pd-layer thickness, and is suppressed by a good wetting of the Pd-clusters on the optically active film. This explains the critical thickness for the catalyzed hydrogen uptake observed in many switchable mirror systems. Moreover, the degradation of the kinetics during cycling is found to depend on the Pd-layer thickness and on the gas environment. Only films, covered with at least 15 nm Pd, show small degradation caused by the SMSI-effect. The SMSI-effect is partly reversible: after changing the gas environment from hydrogen to oxygen, the oxide on the Pd-clusters can be partly removed.     

Parameter determination of a thermal desorption model

A new method for the analysis of thermal desorption spectra is presented, based on the experimental peak maximum functions for temperatureT _m(β) and pressureP _m(β) and a rigorous mathematical treatment. The resonant heating rate β_r is determined, satisfyingT _m(β_r)=T _r, whereT _r is the resonant temperature defined byA exp(−E _d/(RT _r))=1. Desorption energyE _d and frequency factorA can be determined simultaneously with relatively high robustness towards statistical experimental errors as demonstrated by computer-simulated thermal desorption spectra.     

The dehydration of copper(II) acetate monohydrate

The thermal dehydration of copper(II) acetate hydrate has been studied between 353 and 406 K, over a range of humidities. The dehydration is controlled by nucleation-and-growth kinetics at low temperatures, with an activation energy of 154 kJ·mol⁻¹, which changes to contracting-disc kinetics at higher temperatures with a lower activation energy of 76 kJ·mol⁻¹. Frequency factors have also been derived; the value for the high temperature process is low (10⁷s⁻¹) and that for the low temperature step is high (10¹⁷s⁻¹). Optical microscopy has been used to clarify the bulk kinetics; there is evidence for a reactive layer at the surface of the decomposing solid. In celebration of the 60^th birthday of Dr Andrew K. Galwey     

Thermal decomposition of hexamminecobalt(III) chloride

The results of comparative thermal analysis (TG-DTG-DTA-DSC) of the thermal decomposition of hexamminecobalt(III) chloride in air atmosphere are reported. The kinetics and mechanism of the thermal decomposition, the process enthalpy and the variation in specific thermal capacity of the solid product reaction with temperature were determined.     

A thermoanalytical study of the formation and activation of novel copper-carbon catalysts

Simultaneous DSC-TG and DTA-TG were used to investigate the calatytic effect of the metal on the thermal decomposition of a cellulose matrix containing small copper particles. The techniques were also used to demonstrate the effect of the metal particles on the subsequent activation of the carbon matrix, a process which develops the pore structure necessary to expose the metal particles to the gas phase. Temperature programmed desorption was used to study the initial mass loss found on activation. To quantify the catalytic effect of the copper particles on the activation process an estimate was made of the activation energy of the catalysed and uncatalysed reactions. The work gives valuable information on the processes involved in the preparation of a new range of metal-carbon catalysts. In celebration of the 60^th birthday of Dr. Andrew K. Galwey     

磁化合成铁氧体催化机理的探讨

本文用磁化合成法制取了一种新型高效铁氧体催化剂,用高分辨分析电镜,测定了其晶体结构、化学组成和原子级的显微形貌;提出了一种催化机制的新见解和一个研制催化剂的新方法.     

Physical aging of a polyetherimide: Creep and DSC measurements

Creep and differential scanning calorimetry (DSC) measurements have been used to study the physical aging behavior of a polyetherimide. Isothermal aging temperatures ranged from 160°C to T_g with aging times ranging from 10 min to 8 days. The only measurable effect of physical aging on the short-time creep curves is a shift of the creep compliance to longer times. Andrade plots of the compliance versus the cube root of time are linear at short times with the slope β decreasing with increasing aging time to a constant value once equilibrium is reached. Log β³ is related directly to the degree to which the creep curves shift to longer times with physical aging, and is used in this work as a measure of physical aging. A reduced curve of log β³ versus log aging time is obtained for the aging temperatures investigated by appropriate vertical and horizontal shifts. The enthalpy change during aging increases linearly with the logarithm of the aging time, t_a, leveling off at equilibrium at values which increase with decreasing aging temperature. Hence, both nonequilibrium and equilibrium temperature shift factors can be calculated from the DSC data. Good agreement is observed between the equilibrium temperature shift factors obtained from the creep and DSC data. The temperature dependence of the nonequilibrium temperature shift factors is found to be an order of magnitude smaller than that of the equilibrium shift factors. The time scales to reach equilibrium for enthalpy and for mechanical measurements are found to be the same within experimental error. © 1995 John Wiley & Sons, Inc.     

老龄产业发展战略的思考

论述新世纪发展老龄产业的意义、作用、制约因素和内容．目的在于通过老龄产业的发展来解决日趋严重的人口老龄化问题；并运用实证分析法阐明经济发展、计划生育、社会安定与人类进步的关系。     

19F NMR study of relative polarities and reactivities of N-H,N-Hg,and N-Au bonds in 2-(4-fluorophenyl)benzimidazole and its PhHg and Ph3PAu derivatives in intermolecular exchange

It has been shown by the¹⁹F NMR method that the relative polarities of nitrogenelement bonds in 2-(4-fluorophenyl)benzimidazole and its PhHg and PPh₃Au derivatives increase in the order N-H19F NMR. It has been found that these reactions occur by a bimolecular associative mechanism and that the N-H bond is substantially less reactive than the N-Hg and N-Au bonds, which have identical reactivities within the limits of sensitivity of the method used.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1574–1580, August, 1995.This work was carried out with financial support from the Russian Foundation for Basic Research (Project No. 93-03-5528).     

Account for Energy Accommodation in Calculating the Heat Transfer between Coaxial Cylinders

A dependence of the heat transfer between coaxial cylinders on the energy accommodation coefficient is obtained. The known methods of solving a kinetic equation are compared.