变性剂诱导的多结构域蛋白质变性现象的研究

从蛋白质变性的构象渐变模型出发，分析了多结构域蛋白质变性过程的特点，用吸附动力学方法得到了可描述多个结构域变性的关系表示式，特别对典型双结构域蛋白质变性过程予以较详细的讨论。通过对比理论计算结果与实验观测结果，发现在一定参数条件下两者符合较好，从构象渐变的观点，对双结构域蛋白质变性过程中出现双S形变性曲线的原因做出了解释，同时对变性过程中可能出现的一些情况进行了预测和分析。     

Change point estimation in non-monotonic aging models

The problem of estimating change points in various non-monotonic aging models is considered. A general methodology for consistent estimation of the change point is developed and applied to non-monotonic aging models based on the hazard rate function as well as on the mean residual life function.     

多气隙电阻板室抗辐照性能研究

给出了为RHIC-STAR飞行时间探测器设计的多气隙电阻板室(MRPC)的辐照实验结果. 实验采用100mCi⁶⁰Co γ源, 采用不同的剂量率对MRPC进行辐照. 一个室在大剂量率2.87×10^－2Gy/h下辐照了24h后, 其性能如噪声计数率, 暗电流等均大大退化. 另一个室在相对低剂量率5.31×10^－4Gy/h下辐照了530h, 其性能没有见到任何变坏. 实验的目的是为了了解这种探测器在几年的运行中经过大剂量的辐照后的性能变化情况.     

3004铝合金“反常”锯齿屈服现象的研究

在应变速率为5.56×10^-5s^-1—5.56×10^-3s^-1的范围内，在不同温度下(从223K至773K)，对3004铝合金进行系列拉伸试验，探索其锯齿屈服规律；通过激活能的计算、内耗研究、微观组织观察和能谱分析，探讨锯齿屈服的机理与物理本质.结果表明，3004铝合金在形变过程中会出现动态应变时效现象；发现了一种“反常”的锯齿屈服现象：在出现锯齿屈服的温区内，存在锯齿屈服临界应变量转变温度T_t， 关键词： 动态应变时效 锯齿屈服 铝合金 内耗     

磁控溅射ZnO薄膜的成核机制及表面形貌演化动力学研究

利用原子力显微镜分析了ZnO薄膜在具有本征氧化层的Si(100)和Si(111)基片上的表面形貌 随沉积时间的演化. 通过对薄膜生长形貌的动力学标度表征，研究了射频反应磁控溅射条件 下，ZnO薄膜的成核过程及生长动力学行为. 研究发现，ZnO在基片表面的成核过程可分为初 期成核阶段、低速率成核阶段和二次成核阶段. 对于Si(100)基片，三个成核阶段的生长指 数分别为β₁=1.04，β₂=0.25±0.01，β₃=0.74；对 于Si(11 关键词： ZnO薄膜 磁控溅射 生长动力学 成核机制     

Growth kinetics of iron boride layers: Dimensional analysis

Dimensional analysis is presented as a powerful tool in the study of the paste boriding process. In particular, a dimensional method is used to study the growth kinetics of the boride layers FeB and Fe₂B. Experiments were performed in AISI 1045 steel and AISI M2 steel, to test the suggested model. Samples of 1045 steel were prepared and treated using boron paste thickness of 3-5 mm, at temperatures of 1193, 1223 and 1273 K, with 2, 4 and 6 h of treatment time. The M2 specimens had boron paste thickness of 3 and 4 mm and temperatures of 1223, 1253 and 1273 K for 2 and 6 h. Results indicate that the growth of boron layers obeys power laws of the form y = αx^β, where α and β constants are a function of the material and the interface of interest. Validation of the model was carried out using experimental data with an average error percentage of 7.6% for Fe₂B in 1045 steel, 15.8% for FeB and 3.4% for Fe₂B in M2 steel.     

Many-body effects in diffusion-limited kinetics

We review a novel approach to treating many-body effects in diffusion-limited kinetics. The derivation of the general expression for the survival probability of a Brownian particle in the presence of randomly distributed traps is given. The reduction of this expression to both the Smoluchowski solultion and the wellknown asymptotic behavior is demonstrated. It is shown that the Smoluchowski solution gives a lower bound for the particle survival probability. The correction to the Smoluchowski solution which takes into account the particle death slowdown in the initial process stage is described. The steady-state rate-constant concentration dependence and the reflection of many-body effects in it are discussed in detail.     

Characteristic features of carbazole phosphorescence quenching by benzophenone molecules in toluene at 77 K

We have studied the characteristic features of carbazole phosphorescence quenching by benzophenone in toluene at 77 K. We have shown that the decrease in the relative phosphorescence intensity for carbazole (energy donor) by a greater factor than we see for the relative change in its decay time is due to the fact that a change in the phosphorescence decay time occurs only for carbazole molecules participating in triplet-triplet energy transfer, while the substantial decrease in the phosphorescence intensity for carbazole with no change in the phosphorescence decay time is connected with quenching of its singlet states. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 73, No. 4, pp. 554–556, July–August, 2006.