Investigations of Solid State Dynamics at the NRSSR Beamline at PETRA II. An Overview

The present status of the new nuclear resonance beamline PETRA 1 at HASYLAB, DESY, Hamburg is described. Besides an overview of the experimental setup some examples of recent experiments are given. Those cover the main applications, i.e., inelastic scattering from iron alloys and quasielastic scattering from glass-forming liquids. This revised version was published online in August 2006 with corrections to the Cover Date.     

Fe–Mn–Al–C Alloys: a Study of Their Corrosion Behaviour in SO2 Environments

The corrosion reaction of four Fe–Mn–Al alloys exposed to a cycling, dry–humid, SO₂ (0.001% by volume) polluted atmosphere was studied. ICEMS, XPS, AES-SAM and transmission Mössbauer spectroscopy at different temperatures were employed to characterize the corrosion products. The analytical results indicate that (i) ferrihydrite is the main component of the rust; (ii) there is an abundant presence of Mn²⁺ and SO₃ ^2–/SO₄ ^2– on the top of the corrosion layer, the concentration of SO₄ ^2– increasing with the number of cycles; and (iii) the magnetic hyperfine pattern exhibited by the series of low-temperature spectra of the rust is quite different from that observed in the rust formed under similar corrosive environments on iron and weathering steel. This latter finding is correlated with a slow rate of transformation of the Fe³⁺ species formed at the early stages of corrosion into -FeOOH, the usual final product of this type of corrosion processes. The sulphate anions, abundant inside the electrolyte during the wet periods, could be incorporated to the ferrihydrite structure being responsible for the Mössbauer spectral pattern recorded from the corrosion products at low temperatures.     

The effect of HCP on the formation of twin boundaries and dislocations in Ni–Co alloys

In this study, molecular dynamics (MD) was used to simulate the rapid solidification process of Ni₄₇Co₅₃ and Ni₄₈Co₅₂ alloys at a cooling rate of 10¹² K/s. The effects of HCP on the formation of twin boundaries and dislocations in two Ni–Co alloys are studied. It is found that the difference of HCP clusters is the main effect that producing discrepancies on microstructure of two alloys. The number of HCP clusters accounted for 9.23% in Ni₄₇Co₅₃ alloy. They are regularly arranged to form the number of single-layer twin boundaries, and each twin boundary ends in a dislocation. The FCC and HCP structures coexist in the same atomic layers, which is easy to create dislocations. The relatively standard FCC crystal and only 0.32% HCP clusters are formed in Ni₄₈Co₅₂ alloy at 300 K. That small amount of HCP clusters are dispersed on the surface, and cause the formation of dislocation in the border with FCC clusters.     

FP-LMTO method to calculate the structural,thermodynamic and optoelectronic properties of SixGe1−xC alloys

The structural and electronic properties of the ternary Si_xGe_1?xC alloys have been calculated using the full-potential linear muffin-tin-orbital (FP-LMTO) method based on density functional theory within both local density approximation (LDA) and generalised gradient approximation (GGA). The calculated equilibrium lattice constants and bulk moduli are compared with previous results. The concentration dependence of the electronic band structure and the direct and indirect band gaps are investigated. Using the approach of Zunger and co-workers, the microscopic origins of the band gap bowing are investigated also. Moreover, the refractive index and the optical dielectric constant for Si_xGe_1?xC are studied. The thermodynamic stability of the alloys of interest is investigated by means of the miscibility. This is the first quantitative theoretical prediction to investigate the effective masses, optical and thermodynamic properties for Si_xGe_1?xC alloy, and still awaits experimental confirmations.     

Electron paramagnetic resonance investigation of molecular bond rupture due to ozone in deformed rubber

Electron paramagnetic resonance (EPR) provides a sensitive tool by which microscopic bond rupture can be monitored simultaneously with observations of macroscopic deformation and failure. Past techniques for studying fracture in semicrystalline polymers have been extended to investigate degradation of unfilled ruber in the presence of ozone. It was found that the rate of free radical production was linearly proportional to stretch ratio and ozone concentration and that stress relaxation and creep were not directly proportional to this production rate. The latter behavior was attributed to the particular dependence of crack density and growth on stress. It was concluded that at low strains, comparatively few surface cracks form; however, at higher strains, many more crack centers become active. Although many more surface cracks are present, they do not progress into the material as rapidly. Therefore, although more bonds were broken at higher strains and stresses, the stress relaxation rate and creep rates were not significantly increased.     

Die Isolierung radioaktiv markierter nichtmetallischer Einschlüsse aus Hochlegierten Stählen

Zur Isolierung von Einshlüssen aus hochlegierten Stählen werden die Hauptkomponenten Fe, Ni, Cr und weitere Metalle durch mehrstufig ausgeführte Flüssig-Flüssig-Extraktionen mit verschiedenen Extraktionsmitteln abgetrennt. Die im Eindampfrückstand der wäβrigen Phase nach der Extraktion verbleibenden Einschlüsse können für die meisten Radionuklide ohne nennenswerte Selbstabsorption mit einem Groβflächenzählrohr oder anderen geeignetenZählvorrichtungen ausgemessen werden.     

-

Elementveruninigungen auch im Spurenbereich (ppm, ppb) becinflussen die Qualität von Halbleiterselen. Bei der Bestimmung interssierender Elemente (Ag, As, Au, Cd, Ga, Sb, Tl) mittles NAA ist mich der Neutronenbestrahlung im Kernreaktor wegen der Störung dutch die entstehende hohe Matrixaktiviät, der Anwesenheit reiner Betastrahler oder infolge Linienüberlagerung im Gammaspektrum im allgemeinen Keine instrumente NAA möglich. Daher müssen nache Zugabe inaktiver Träger und der Matrixabtrennung die interessierenden E-emente durch konventionel-e chemisch-analytische Trennverfahren (Extraktion, Fällung, Ionenaustausch) isoliert warden.     

Conversion Electron Moessbauer Spectroscopie Studies on Ion Implanted Iron Layers

Conversion electron Moessbauer spectroscopy (CEMS) is a method very suitable for the study of ion implanted iron. It is demonstrated on nitrogen and phosphorus implanted iron layers. Using this technique not the 14.4-keV-gamma-rays as in the case of the conventional Moessbauer transmission experiments but the conversion and Auger electrons are detected. These electrons have a maximum energy of 7.3 keV. The Moessbauer signal can be obtained from a surface layer of about 300 nm. But the main fraction of the signal, namely 65%, comes from the first 50 nm. This range is just interesting for ion implantation. Depending on the test conditions different iron nitrides are formed by the nitrogen implantation and the phosphorus implantation can result in both amorphization and compound formation in the implanted layer.     

The aging of atmospheric plasma-treated ultrahigh-modulus polyethylene fibers

The aging effects of atmospheric plasma treatments on UHMPE fibers are studied. UHMPE fibers are treated for 0.5 and 1 min with He/O₂/air gas and for 2 and 4 min with He/air gas by atmospheric pressure plasma on a capacitively coupled device at a frequency of 5 kHz. The samples are tested for fiber/epoxy interfacial shear strength at time intervals of 0, 3, 15 and 30 days after initial plasma treatment. Scanning electron microscopy shows micro-cracks on each set of treated fibers, which is not affected by aging over the 30 day study. Interfacial shear strengths (IFSS) for plasma-treated fibers are 2–3 times as high as that of the control. The IFSS for the plasma treated fibers remains constant up to 15 days and then decreases afterwards. XPS Analysis shows a slight increase in atomic concentration of oxygen and nitrogen for each plasma-treated sample. For the He/O₂/air plasma-treated samples, XPS analysis shows an observable increase in C–OH bonds, C=O bonds and COOH bonds, while for the He/air plasma-treated samples, there is a slight increase in C–OH and O=C–O bonds. After 30 days, a decrease in oxygen content for all plasma-treated samples is manifested.     

Precipitate assemblies formed on dislocation loops in aluminium-silver-copper alloys

The precipitation microstructure of the γ′ (AlAg₂) intermetallic phase has been examined in aluminium-silver-copper alloys. The microstructure developed in an Al-0.90at.%Ag-90at.Cu alloy was significantly different from that reported for binary Al-Ag alloys. The orientation relationship between the matrix and precipitate was unchanged; however, the γ′ phase formed assemblies with a two-dimensional, open arrangement of precipitates. Each such assembly contained two variants of the γ′ phase alternately arranged to form a faceted elliptical unit. The θ′ (Al₂Cu) phase formed on these assemblies after further ageing. Each assembly was formed via repeated precipitation of the γ′ phase on dissociated segments of a single dislocation loop. This faceted elliptical assembly has not been previously reported for the γ′ precipitate. The difference between the precipitation behaviour of the γ′ phase in Al-Ag and Al-Ag-Cu alloys was attributed to copper modifying the as-quenched defect structure of the matrix. The formation of faceted elliptical γ′ phase assemblies clarifies earlier observations on the precipitate number density and mechanical properties of aluminium-silver-copper alloys.