Cyclic voltammetry study of electrodeposition of CuGaSe2 thin films on ITO-glass substrates

The electrodeposition mechanism of CuGaSe₂ (CGS) thin films on ITO substrates has been investigated using cyclic voltammetry technique. The cyclic voltammetric study was performed in unitary Cu, Ga and Se systems, binary Cu–Se, Ga–Se systems and ternary Cu–Ga–Se system. The electrodeposition metallic Ga from Ga unitary electrolytes is impossible due to its low reduction potential. No reduction peak was found for the reduction of Ga³⁺ to Ga in the cyclic voltammogram of unitary system. However, in the cyclic voltammogram of ternary Cu–Ga–Se system, reduction peak at −0.6 V was observed with addition of GaCl₃. Also, current density of the peak was increased with increasing concentration of GaCl₃. It is corresponded to the formation of gallium selenides and/or copper–gallium–selenium compounds. The contents of Ga in the films were significantly changed from −0.4 V to −0.6 V. SEM and XRD analysis also showed that surface morphology and crystalline phase of films were significantly changed with increasing Ga content.     

Electroreduction of cationic fluorene complexes of manganese

Using cyclic voltammetry method, the reduction of cationic η⁶-fluorene complexes of manganese [(η⁶-9-R-C₁₃H₉)Mn(CO)₂L]PF₆ (L = CO, R = H (1 ⁺); L = CO, R = CH₃ (2 ⁺); L = PⁿBu₃, R = H (3 ⁺); L = CO, R = ^tBu (4 ⁺)) is studied. It is shown that, depending on the nature of a substituent in the position 9 of the fluorene ligand, the reduction occurs either with the detachment of an H atom from position 9 to give zwitterion compounds (complexes 1 ^±, 2 ^±, 3 ^±) or with the attachment of an H atom into the coordinated ring of the fluorene ligand to given η⁵-cyclohexadienyl complex (η⁵-9-^tBu-C₁₃H₉)Mn(CO)₃ (5).     

Use of hydrogen peroxide to achieve interference-free stripping voltammetric determination of copper at the bismuth-film electrode

In this work, a new approach is presented to allow interference-free determination of Cu (II) by stripping voltammetry using the bismuth-film electrode. The addition of hydrogen peroxide to the electroanalytical cell has promoted complete resolution between re-dissolution peaks of Bi (III) and Cu (II). The absence of interference could be evaluated by the correlation coefficient (r > 0.99) between Cu (II) concentration and its shifted current peak (at +212 mV) while achieving a slightly fluctuation of the bismuth current peak at −180 mV. Studies were performed aiming towards the optimum conditions for trace determination of Cu (II) using hydrogen peroxide. The methodology was applied to a real sample (sugarcane spirits) and the results were compared to those from graphite furnace atomic absorption spectrometry. The analytical parameters of merit and the results of the analysis indicated that the analytical methodology could be readily used for trace determination of Cu (II).     

Formation of negative oxidation states of platinum and gold in redox ionic liquid: Electrochemical evidence

The electrochemical reduction of noble metal electrodes in the presence of redox ionic liquid, 1-ferrocenylethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [FcEMIM][TFSI], was investigated by cyclic voltammetry. Our experiments suggest the formation of metal with negative oxidation states, in the cases of platinum and gold electrodes [M_n⁻, FcEMIM⁺]. By analogy with the previous work, the formation of these phases is concomitant with the insertion of the supporting electrolyte; which correspond in our experimental condition to the redox cation of the ionic liquid. As an exciting result, the electrochemical investigations of the reduced electrode in electrolytic solution, containing solvent and supporting electrolyte, evidence the presence of the ferrocene groups at the electrode surface. Moreover, the reduced electrode exhibits the presence of the ferrocene even after, contact with air, after ultrasound, and after physical polishing, highlighting the large stability of this organo-metallic phases formed in this media. The AFM investigations demonstrate the morphological change of the platinum surface after the reduction process. Finally, our works bring a formal electrochemical proof of the presence of the ionic liquid cation inside the electrode material after the cathodic treatment in this media.     

Electrochemical and Spectroscopic Properties of Fly Ash–Polyaniline Matrix Nanorod Composites

Polyaniline (PANI) nanocomposites were prepared with fly ash (FA) either by aging the starting materials (aniline and FA) before oxidative polymerisation or by including poly(styrene sulphonic acid) (PSSA) eliminating the aging step. The aging procedure formed polymer nanotubes that have cross-sectional diameters of 50–110 nm. The procedure involving PSSA produced nanorods and nanofibres composites that have diameters of 100–500 nm and length of up to 10 μm attributed to the presence of metal oxides and silica in FA. The electrochemical analysis of the PANI–PSSA–FA nanorod composites shows three redox couples with formal potentials, , values of 105 mV, 455 mV and 670 mV, and conductance, C, value of 1.21 × 10⁻² S. The UV-Vis spectroscopy of the polymeric nanorod shows absorption maxima at 340 and 370 nm (due to π–π^* transition of the benzoid rings), and 600–650 nm (due to charge transfer excitons of the quinoid structure), which are characteristic of emeraldine base.     

Reactivity of 2,2′‐Bis(2N‐(1,1′,3,3′‐tetramethyl‐guanidino))diphenylene‐amine with CuI and [Cu(MeCN)4][PF6]: Benzimidazole Formation vs. Cu Oxidation

The reaction of 2,2′‐Bis(2N‐(1,1′,3,3′‐tetramethyl‐guanidino))diphenylene‐amine (TMG₂PA) ( 1 ) with CuI in MeCN results in the formation of [Cu^II(TMG₂PA^amid)I] ( 2 ) indicatingthat Cu^I is the target of an oxidative attack of the N‐H proton of the ligand which itself is converted to molecular hydrogen. In contrast, if [Cu(MeCN)₄][PF₆] is used as the Cu^I source, [Cu^I₂(TMGbenz)₂][PF₆]₂ ( 3 ) is obtained instead. The use of the non‐coordinating counterion [PF₆]^– apparently prevents Cu^I from oxidation but induces itself a cyclisation reaction within the ligand which results in the formation of a benzimidazole‐guanidine ligand.     

Sensitive Electrochemical Quantification of Proanthocyanidins in Grapevine (Vitis vinifera) by Utilizing Disposable Screen-printed Carbon Electrodes

This work presents quantification of proanthocyanidins (PAs) isolated from grapevine using disposable screen-printed carbon electrodes (SPCE). Procyanidin B2 (B2) used as a model to investigate the electrochemical characteristics of complicated PAs structures in Britton Robinson buffer solution using cyclic voltammetry and square wave voltammetry. B2 exhibits a well-defined reversible redox wave at +0.49 V vs. Ag/AgCl. Significantly, the B2 was determined over a linear concentration range of 3.45–34.6 μM with a detection limit of 2.07 μM. The SPCE was used to analyze PAs in grapevine samples, and the results were consistent with those obtained using Folin-Ciocalteu standard method.     

Sensitive Electrochemical Detection of Thiabendazole in Fruits Using Ag−MoS2 Electrode

Herein, Ag nanoparticles (NPs) modified MoS₂ (Ag−MoS₂) was applied to the surface of glassy carbon (GC) to produce a robust electrochemical sensor for the detection of thiabendazole, a common antifungal in the post-harvesting of fruits. Cyclic voltammetry studies confirmed thiabendazole exhibited an irreversible, diffusion-controlled process on Ag−MoS₂ with a two-fold increase in peak current than the pristine MoS_2. A square wave voltammetry was used for the detection of TBZ. The developed sensor exhibited a linear range between 1–10 μM with LOD down to 0.1 μM (S/N>3). Analysis of TBZ in mango and banana matrices gave a recovery of 91.6–100.4 % indicating the suitability of the sensor for food safety monitoring.     

羟乙芦丁在玻碳电极上的阳极微分脉冲伏安法测定

本文对羟乙芦丁在玻碳电极上的阳极微分脉冲安行为进行了研究，发现在Ｎａ２ＨＰＯ４溶液中（ｐＨ＝８．９５）于＋０．６４Ｖ（ｖｓ．Ａｇ／ＡｇＣｌ）左右产生一个良好的阳极氧化伏安峰，浓度在５～６０ｍｇ／Ｌ之间与峰电流呈线性关系，不需分离直接测定了片剂中的羟乙芦丁含量。电极反应为扩散速率控制的不可逆可程。     

Thermodynamic and voltammetric studies of salicylaldehyde-4-(2-pyridyl)-3-thiosemicarbazone

Summary UV spectra, dc polarograms, cyclic voltammetry and coulometry measurements of salicylaldehyde-4-(2-pyridyl)-3-thiosemicarbazone (H₂ SPT) were recorded inBritton-Robinson buffer solutions ofpH 2–12. The dissociation constants of H₂ SPT evaluated spectrophotometrically and potentiometrically in a 5% (v/v)DMF-water mixture are concordant. The dc-polarograms in solutions ofpH<8.5 exhibit a single 4-electron diffusion-controlled polarographic wave, whereas in solutions ofpH>8.5 two waves are observed. The cyclic voltammograms give a single cathodic peak in acidic and neutral solutions, whereas two cathodic peaks can be identified in alkaline ones. An electrode mechanism is proposed and discussed. The effect of temperature on the dissociation constants and the polarographic data was also investigated; the corresponding thermodynamic parameters were derived and are discussed.

---

Thermodynamische und voltammetrische Untersuchungen an Salicylaldehyd-4-(2-pyridyl)-3-thiosemicarbazon

Zusammenfassung UV-Spektroskopische, dc-polarographische, voltammetrische und coulometrische Messungen an Salicylaldehyd-4-(2-pyridyl)-3-thiosemicarbazon (H₂ SPT) inBritton-Robinson-Pufferlösungen (pH 2–12) wurden durchgeführt. Die spektrophotometrisch und potentiometrisch ermittelten Dissoziationskonstanten von H₂ SPT in 5% (v/v)DMF/Wasser stimmen überein. In Lösungen mit einempH-Wert unter 8.5 zeigen die dc-Polarogramme eine einzelne diffusionskontrollierte polarographische Welle (4e^–), während in Lösungen mit einempH-Wert von über 8.5 zwei Wellen zu beobachten sind. Die cyclischen Voltammogramme weisen in sauren und neutralen Lösungen einen, in basischen Lösungen hingegen zwei kathodische Peaks auf. Ein Elektrodenmechanismus wird vorgeschlagen und diskutiert. Der Effekt der Temperatur auf die Dissoziationskonstanten und die polarographischen Ergebnisse wurde ebenfalls untersucht. Die entsprechenden thermodynamischen Größen wurden bestimmt und werden diskutiert.