血压指标的聚类分析

利用353人的血压数据,运用2种不同的聚类分析方法对15个血压指标分类并挑选典型指标:一是利用SAS软件包中提供的变量聚类过程(VARCLUS过程)对指标进行裂类聚类分析;一是利用SAS中提供的样品聚类过程(CLUSTER过程)对指标进行系统聚类分析.2种方法得到了相同的结果:15个指标分成了4类,得到4个典型指标:BPR(收缩压与舒张压比值),BPP(收缩压与舒张压乘积),MAPPr(平均动脉压与脉率乘积),BPRPr(BPR与脉率乘积).     

金属氢研究新进展

简要介绍了金属氢的研究意义和应用前景 ,详细评述了有关的高压实验方法和最近的研究成果及进展 ,特别是固体氢的相图、结构和相变 .近十多年来 ,随着超高压技术的发展 ,已能在金刚石对顶砧 (DAC)上产生30 0GPa的静态压力 ,并可进行高压原位实验研究 .对固体氢进行了高压拉曼、同步辐射X射线、光反射和吸收、同步辐射红外光谱等一系列高压物性和相变研究 .从而确定了固体氢的三个相 ,并提出了可能的相结构 .     

New isothermal equation of state of solids applied to high pressures

In the present paper, a new two-parameter inverted equation of state (EOS) is developed which is found to be working very well in the high-pressure region. To check its success and validity, this EOS has been applied in a number of solids. The computed volume compression is found to be in very good agreement with the experimental data in the whole range of pressure in all the solids. The minimum and the maximum pressure range used in the present study is 0–320 kbar and 0–3000 kbar, respectively.     

圆形池壁滑模提升系统设计与施工

本阐述了郑州污水处理厂等直径钢筋混凝土消化池，采用滑升模板施工，连续浇筑混凝土提高工效，经过满水和闭气试验，符合设计要求，保证工程质量．取得较好的结果。     

Comparisons of pharynx, source, formant, and pressure characteristics in operatic and musical theatre singing

Belting, a vocal technique typically cultivated in musical theatre singing, differs timbrally from operatic singing in many interesting respects. The underlying phonatory differences have not been previously investigated in detail. Yet, belting is frequently associated with disturbances of voice function. Articulatory and phonatory characteristics are investigated in a female subject who is a professional singer (co-author JL) trained in both the operatic and belting styles and in an intermediate vocal technique (“mixed”). This article presents data obtained from this subject by video-fiberoptic observation of the pharynx, inverse filtering of airflow, and measurement of subglottal pressure. The results reveal that belting was characterized by very high subglottal pressures and sound levels, and apparently also by a comparatively high degree of glottal adduction. Comparisons with other investigations of related aspects of belting and operatic singing support the assumption that the data obtained from our subject are representative for these vocal techniques.     

室温下压致铁钴镍合金的bcc→hcp相变

 本文采用高压X光衍射方法在金刚石对顶压砧中在位地（in situ）研究了Fe₆₈Co₂₄Ni₈（wt%）合金在室温下的压致bcc→hcp结构相变和直到40.5 GPa的等温压缩行为。实验结果表明该合金在常压下为bcc结构，晶格常数a₀=(0.287 0±0.000 1) nm，体积V₀=(7.119±0.007) cm³/mol，密度ρ₀=(7.981±0.008) g/cm³；在20.9 GPa附近出现bcc→hcp结构相变，两相共存压力区约10 GPa，在此区域内有晶面间距d(002)_hcp=d(110)_bcc，且原子平面(002)_hcp//(110)_bcc，hcp相比bcc相体积减小(0.33±0.02) cm³/mol；高压相hcp结构的晶格参数比值c/a=1.608±0.004；相变后原子配位数的增加使得hcp相(002)平面内及(002)平面间的最近邻原子间距比bcc相最近邻原子间距分别增大约1.6%和0.5%；用Murnaghan状态方程对实验数据进行最小二乘法拟合，得到bcc相B₀=(130±13) GPa，B₀'=12.6±0.5；hcp相V₀=(6.62±0.04) cm³/mol，B₀=(243±21) GPa，B₀'=6.8±0.3；对于该合金的bcc→fcp相变时的结构转变机制做了详细的讨论。     

高压下液态Ag-20 at%Ge合金的凝固及密排六方亚稳相的形成

 利用高压淬火方法，在液态Ag-20at%Ge合金的凝固过程中，对比液态急冷低四个数量级的冷却速率得到了单相密排六方结构亚稳相，其点阵参数为a=0.289 8 nm，c=0.470 8 nm，c/a=1.625。     

否定毛细永动机的唯象理论

本文从毛细现象自身所满足的规律、弯曲液面所具有的性质着手，给出了一种否定毛细永动机的唯象理论。     

热辐射驱动烧蚀平面金靶的数值定标定律

利用一维辐射流体力学编码数值研究了辐射烧蚀波在平面金靶中的传播情况,并在常温边界条件下得到了辐射流、烧蚀压、质量烧蚀率和特征等离子体密度的定标定律。     

Gas solubility of carbon dioxide in poly(lactic acid) at high pressures: Thermal treatment effect

The sorption of carbon dioxide in glassy Poly(lactic acid) (PLA) films was studied by quartz crystal microbalance (QCM) at high pressures. Two thermal treatments, melted and quenched, were performed in PLA with two different L:D contents, 80:20 and 98:2, films and compared with a third thermal protocol, annealed, and used in a previous work. The results obtained show that for pressures higher than 2 MPa, the carbon dioxide solubility is larger in PLA 80:20 than in PLA 98:2, indicating that the L:D plays a dominant role on this property. The thermal treatments only affect the gas solubility in PLA 98:2. Sorption isotherms at temperatures 303, 313, and 323 K, below the glass transition temperature of the polymer, and pressures up to 5 MPa were measured and analyzed with three different models, the dual‐mode sorption model, the Flory–Huggins equation, and a modified dual‐mode sorption model where the Henry's law term was substituted by the Flory–Huggins equation. This last model performs especially well for CO₂ in PLA 80:20, due to the convex upward curvature of the solubility isotherms for that system. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 616–625, 2007