当前工程造价改革之我见

对工程造价的含义作了明确的定义，分析了工程造价的特点，提出了关于当前工程造价改革的几点建议。     

LINEAR ACTIVE STRUCTURES AND MODES (Ⅱ)--DISCRETE SYSTEMS AND BEAMS

The basic concepts about the active structures and some attributes of the modes were presented in paper "Liner Active Structures and Modes ( Ⅰ ) ". The characteristics of the active discrete systems and active beams were discussed, especially, the stability of the active structures and the orthogonality of the eigenvectors. The notes about modes were portrayed by a model of a seven-storeyed building with sensors and actuators. The concept of the adjoint active structure was extended from the discrete systems to the beams that were the representations of the continuous structures. Two types of beams with different placements of the measuring and actuating systems were discussed in detail. One is the beam with the discrete sensors and actuators, and the other is the beam with distributed sensor and actuator function. The orthogonality conditions were derived with the modal shapes of the active beam and its adjoint active beam. An example shows that the variation of eigenvalues with feedback amplitude for the homo-configuration and non-homo-configuration active structures.     

Photoinitiated curing of mono‐ and bifunctional epoxides by combination of active chain end and activated monomer cationic polymerization methods

Photoinitiated cationic polymerization of mono‐ and bifunctional epoxy monomers, namely cyclohexeneoxide (CHO), 4‐epoxycyclohexylmethyl‐3′,4′‐epoxycyclohexanecarboxylate (EEC), respectively by using sulphonium salts in the presence of hydroxylbutyl vinyl ether (HBVE) was studied. The real‐time FTIR spectroscopic, gel content determination, and thermal characterization studies revealed that both hydroxyl and vinyl ether functionalities of HBVE take part in the polymerization. During the polymerization, HBVE has the ability to react via both active chain end (ACE) and activated monomer mechanisms through its hydroxyl and vinyl ether functionalities, respectively. Thus, more efficient curing was observed with the addition of HBVE into EEC‐containing formulations. It was also demonstrated that HBVE is effective in facilitating the photoinduced crosslinking of monofunctional epoxy monomer, CHO in the absence of a conventional crosslinker. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4914–4920, 2007     

An effect of application of chiral aluminium alkoxides and amides as adducts to zirconium catalyzed carbo- and cycloalumination of olefins

This paper is dedicated to a study of properties of the following novel optically active organoaluminium compounds (OACs): (1S,2S)-l,7,7-trimethyl-2-[(dialkylalumina)oxy]-bicyclo[2.2.1]heptanes and (1S)-N-(dialkylalumina)-6,7-dimethoxy-1-methyl-1,2,3,4- tetrahydroisoquinolines. The synthesis of the chiral OACs was carried out in the reaction of either natural camphor or salsolidine with both AlEt₃ and i-Bu₂AlH. The main goal of the research was to investigate the stereodifferentiating activity of the chiral OACs in the olefin carbo- and cycloalumination reactions, catalyzed by Cp₂ZrCl₂.     

临汾凹陷区主要活动断裂卫星影像分析

论述了活动断裂的一般影像特征，对临汾凹陷区主要活动断裂构造的卫星影像进行了分析，从而论证了应用卫星影像可以查明活动断裂的具体特征、力学性质及活动方式等，使人类进一步认识断裂构造的活动规律，将其所造成的自然灾害损失降至最低。     

巷旁充填沿空留巷技术研究

本文通过转Ⅳ喷射机组成的风力充填系统输送矸石——水泥胶凝混合料的巷旁充填研究,介绍了该技术在沿空留巷中应用及效果,并对改进提出了建议。     

陈骥《文则》的现代修辞观

陈骏的《文则》是中国历史上第一部谈及文法修辞的专著，其价值是多方面的，本文从陈骏创作实践中运用多种积极辞格阐述相关的修辞理论，以评价他的积极修辞观；《文则》“虽以事出创造，不无瑕疵”，但论及了语法、句法、辞格、文章、风格、文体等多方面内容，初步建立了大修辞学体系，体现了现代修辞学界所倡导的广义修辞观；陈骏虽是对《诗》《书》《礼》《易》《春秋》等静态书面语言的考察，但用动态的辩证的眼光提出了不少真知灼见，体现了动态的辩证的修辞观。     

Cu-MgF2复合纳米金属陶瓷薄膜的电导特性研究

用射频磁控共溅射法制备了Cu体积分数分别为 10 % ,15 % ,2 0 %和 3 0 %的Cu MgF2 复合金属陶瓷薄膜 .用x射线衍射、x射线光电子能谱和变温四引线技术对薄膜的微结构、组分及电导特性进行了测试分析 .微结构分析表明 :制备的Cu MgF2 复合薄膜由fcc Cu晶态纳米微粒镶嵌于主要为非晶态的MgF2 陶瓷基体中构成 ,Cu晶粒的平均晶粒尺寸随组分增加从 11 9nm增至 17 8nm .5 0— 3 0 0K温度范围内的电导测试结果表明 :当Cu体积分数qM 由 15 %增加到 2 0 %时 ,Cu MgF2 复合薄膜的电阻减小了 8个量级 ,得出制备的复合薄膜渗透阈qCM 应处于 15 %和 2 0 %之间 .qM 在 10 %和 15 %之间的薄膜呈介质导电状态 ,而在 2 0 %和 3 0 %之间的薄膜则呈金属导电状态 .从理论上讨论了复合薄膜中杂质电导和本征电导的激活能及其对电导的贡献 ,并讨论了Cu MgF2 复合纳米金属陶瓷薄膜的渗透阈 ,得到了和实验一致的结果     

Study of solar features causing GMSs with 250γ<<Emphasis Type="Italic">H</Emphasis><400γ

The effect of solar features on geospheric conditions leading to geomagnetic storms (GMSs) with planetary index,A ^P ≥ 20 and the range of horizontal component of the Earth’s magnetic fieldH such that 250γ <H < 400γ has been investigated using interplanetary magnetic field (IMF), solar wind plasma (SWP) and solar geophysical data (SGD) during the period 1978–99. Statistically, it is observed that maximum number of GMSs have occurred during the maximum solar activity years of 21st and 22nd solar cycles. A peculiar result has been observed during the years 1982, 1994 when sunspot numbers (SSNs) decrease very rapidly while numbers of GMSs increase. No distinct association between yearly occurrence of disturbed days and SSNs is observed. Maximum number of disturbed days have occurred during spring and rainy seasons showing a seasonal variation of disturbed days. No significant correlation between magnitude (intensity) of GMSs and importance ofH _α , X-ray solar flares has been observed. Maximum number of GMSs is associated with solar flares of lower importance, i.e., SF during the period 1978-93.H _α , X-ray solar flares occurred within lower helio-latitudes, i.e., (0–30)°N to (0–30)°S are associated with GMSs. NoH _α , X-ray solar flares have occurred beyond 40°N or 40°S in association with GMSs. In helio-latitude range (10–40)°N to (10–40)°S, the 89.5% concentration of active prominences and disappearing filaments (APDFs) are associated with GMSs. Maximum number of GMSs are associated with solar flares. Coronal mass ejections (CMEs) are related with eruptive prominences, solar flares, type IV radio burst and they occur at low helio-latitude. It is observed that CMEs related GMS events are not always associated with high speed solar wind streams (HSSWSs). In many individual events, the travel time between the explosion on the Sun and maximum activity lies between 58 and 118 h causing GMSs at the Earth.