A Molecular Photosensitizer in a Porous Block Copolymer Matrix-Implications for the Design of Photocatalytically Active Membranes

Recently, porous photocatalytically active block copolymer membranes were introduced, based on heterogenized molecular catalysts. Here, we report the integration of the photosensitizer, i. e., the light absorbing unit in an intermolecular photocatalytic system into block copolymer membranes in a covalent manner. We study the resulting structure and evaluate the orientational mobility of the photosensitizer as integral part of the photocatalytic system in such membranes. To this end we utilize transient absorption anisotropy, highlighting the temporal reorientation of the transition dipole moment probed in a femtosecond pump-probe experiment. Our findings indicate that the photosensitizer is rigidly bound to the polymer membrane and shows a large heterogeneity of absolute anisotropy values as a function of location probed within the matrix. This reflects the sample inhomogeneity arising from different protonation states of the photosensitizer and different intermolecular interactions of the photosensitizers within the block copolymer membrane scaffold.     

在体酶生物燃料电池的研究进展

酶生物燃料电池(Enzymatic biofuel cells,EBFCs)具有高专一性和催化性能,可催化与氧化还原反应有关的燃料并获得电能.可用的生物燃料,如葡萄糖、乳酸和丙酮酸盐,可以从汗液、泪液和血液中提取,因而以体液为燃料的EBFCs在可植入式或可穿戴式设备中具有良好的应用前景.采用生物电催化机理对酶生物燃料电池在体液发电中的应用进行了研究,以及对可植入式或可穿戴式生物燃料电池的主要挑战和未来的前景进行了展望.     

一维纳米材料Cs0.2WO3和W18O49长度与红外吸收关联性的Mie散射理论推导及实验验证

研究表明二元、三元钨基氧化物的红外吸收性能具有尺寸和形貌依赖性,但还没有普适性的物理学机理及计算方法。本工作基于Mie散射理论,推导了一维材料的长度与光吸收性能之间的关系,通过理论推导计算和实验验证,探究了纳米钨基氧化物的红外吸收性能与颗粒长度的关联性。首先,基于Mie散射理论的推演和计算,揭示了增加纳米Cs_(0.2)WO_3和W_(18)O_(49)材料长度可适度提高其近红外吸收性能的规律。其次,测试了合成的不同长度Cs_(0.2)WO_3纳米棒和W_(18)O_(49)纳米线的红外吸收性能,结果与理论计算及模拟相吻合。其中在2 500～20 000 nm波长范围内Cs_(0.2)WO_3纳米棒和W_(18)O_(49)纳米线随长度的变化趋势不同,Cs_(0.2)WO_3纳米棒的红外吸收性能随长度的增加而增加,而W_(18)O_(49)纳米线的红外吸收性能随长度的增加而减弱。Cs_(0.2)WO_3纳米棒和W_(18)0O_9纳米线的光热效应均随长度的增加而增加,增幅分别达18.5%和12.7%,再次验证了长度效应。     

The Photophysics and Photochemistry of Melanin- Like Nanomaterials Depend on Morphology and Structure

Melanin-like nanomaterials have found application in a large variety of high economic and social impact fields as medicine, energy conversion and storage, photothermal catalysis and environmental remediation. These materials have been used mostly for their optical and electronic properties, but also for their high biocompatibility and simplicity and versatility of preparation. Beside this, their chemistry is complex and it yields structures with different molecular weight and composition ranging from oligomers, to polymers as well as nanoparticles (NP). The comprehension of the correlation of the different compositions and morphologies to the optical properties of melanin is still incomplete and challenging, even if it is fundamental also from a technological point of view. In this minireview we focus on scientific papers, mostly recent ones, that indeed examine the link between composition and structural feature and photophysical and photochemical properties proposing this approach as a general one for future research.     

SnO2表面卤化提高钙钛矿太阳能电池光伏性能

钙钛矿太阳能电池(PSCs)成为近几年来迅速发展的新型太阳能电池,其中将SnO₂纳米粒子层用作电子传输层(ETL)的钙钛矿太阳能电池器件得到了广泛的关注。SnO₂有着更低的制备温度,使其具备应用于柔性器件的潜力,但与钙钛矿层能级不匹配等问题限制着其发展。而在界面处加入钝化层,尤其是表面卤化的方法或可解决这一问题。本文综合研究了SnO₂表面卤化对钙钛矿太阳能电池光伏性能的影响,选用四丁基氯化铵(TBAC)、四丁基溴化铵(TBAB)和四丁基碘化铵(TBAI)三种钝化材料对SnO₂表面进行钝化处理,并对钝化材料溶液进行了浓度梯度研究。通过材料形貌、结构和光学性能表征以及电池器件性能测试分析等方法,证明了SnO₂表面卤化可提高钙钛矿层的质量和PSCs光伏性能,并从器件内部电荷传输动力学等角度解释了器件性能改善的原因。为进一步说明其性能改善的机理,采用基于密度泛函理论(DFT)的第一性原理计算方法对材料表面性质进行了深入研究,从能量、结构、电荷密度、态密度、功函数等角度解释了表面卤化提高SnO₂/钙钛矿界面处电子传输特性的原因。实验和理论计算均表明TBAC对于SnO₂具有较好的钝化效果,并随着溶液浓度的提升钝化作用越明显。SnO₂表面卤化作用的深入研究不仅对提高电池器件性能具有实际意义,还能够帮助理解太阳能电池界面现象,为界面改性提供新的研究思路。     

BiVO4的添加对Nd0.2Ce0.8O1.9电解质微观结构和性能的影响

采用溶胶凝胶法制备BiVO₄（BV）和Nd_0.2Ce_0.8O_1.9（NDC）粉末,研究BV的加入对NDC电解质结构、形貌及电性能的影响。实验结果表明,NDC-5BV电解质的微观结构更致密,700℃时总电导率（σ_t）提高至3.35×10^-2 S·cm^-1,极化电阻（R_p）降低34%以上。单电池在700℃时的最大功率密度（MPD）为514 mW·cm^-2,开路电压（OCV）在70 h内可以保持良好的长期稳定性。     

Extended X‐ray absorption fine structure and multiple‐scattering simulation of nickel dithiolene complexes Ni[S2C2(CF3)2]2n (n = −2, −1, 0) and an olefin adduct Ni[S2C2(CF3)2]2(1‐hexene)

A series of Ni dithiolene complexes Ni[S₂C₂(CF₃)]₂ⁿ (n = ?2, ?1, 0) ( 1 , 2 , 3 ) and a 1‐hexene adduct Ni[S₂C₂(CF₃)₂]₂(C₆H₁₂) ( 4 ) have been examined by Ni K‐edge X‐ray absorption near‐edge structure (XANES) and extended X‐ray absorption fine‐structure (EXAFS) spectroscopies. Ni XANES for 1 – 3 reveals clear pre‐edge features and approximately +0.7 eV shift in the Ni K‐edge position for `one‐electron' oxidation. EXAFS simulation shows that the Ni—S bond distances for 1 , 2 and 3 (2.11–2.16 Å) are within the typical values for square planar complexes and decrease by ～0.022 Å for each `one‐electron' oxidation. The changes in Ni K‐edge energy positions and Ni—S distances are consistent with the `non‐innocent' character of the dithiolene ligand. The Ni—C interactions at ～3.0 Å are analyzed and the multiple‐scattering parameters are also determined, leading to a better simulation for the overall EXAFS spectra. The 1‐hexene adduct 4 presents no pre‐edge feature, and its Ni K‐edge position shifts by ?0.8 eV in comparison with its starting dithiolene complex 3 . Consistently, EXAFS also showed that the Ni—S distances in 4 elongate by ～0.046 Å in comparison with 3 . The evidence confirms that the neutral complex is `reduced' upon addition of olefin, presumably by olefin donating the π‐electron density to the LUMO of 3 as suggested by UV/visible spectroscopy in the literature.     

WSANs中基于蜂巢结构的移动容错恢复算法

旨在研究无线传感器与执行器网络(WSANs)中节点失效情况下恢复执行器(actor)节点服务的算法. 首先说明了WSANs中的实时覆盖模型, 证明WSANs覆盖恢复问题是NP难问题, 给出了近似求解方案. 在此基础上, 提出了一种基于六边形蜂巢结构的移动容错算法HMFR用于恢复失效actor节点, HMFR 算法在限制网络初始部署的条件下拥有很好的性能. 通过实验与现有的恢复算法进行比较, 发现HMFR算法在actor覆盖sensor节点数和移动距离方面有更好的性能.