A radar-infrared compatible broadband absorbing surface:Design and analysis

A radar-infrared compatible stealth surface is designed and analyzed. Without modifying the radar absorbing material(RAM), the design can theoretically achieve radar-infrared compatibility and broadband radar absorption through surface patterns and structures. A transmission-line-based model(TLM) is developed to analyze the radar absorbing performance of the surface. Optimization of the structure geometries is conducted aiming to maximize the-10 d B absorption bandwidth in 2–18 GHz. Surface with optimized structure geometries exhibits a superior absorption bandwidth, more than twice the bandwidth of the original 1.5 mm RAM slab, while maintaining a relatively low infrared emissivity.     

一维光子晶体的量子透射特性

用光的量子理论方法研究一维光子晶体的量子透射特性,先给出一维光子晶体的量子转移矩阵和量子透射率,再计算缺陷层数目、厚度及折射率变化对一维光子晶体量子透射特性的影响.结果表明,缺陷层参数的变化对禁带位置、缺陷模位置和强度均产生影响.     

A spectroscopic study of laser-induced tin–lead plasma: Transition probabilities for spectral lines of Sn I

In this paper, we present transition probabilities for 97 spectral lines of Sn I, corresponding to transitions n(n = 6,7,8)s → 5p², n(n = 5,6,7)d → 5p², 5p³ → 5p², n(n = 7)p → 6s, determined by measuring the intensities of the emission lines of a Laser-induced breakdown (emission) spectrometry (LIBS). The optical emission spectroscopy from a laser-induced plasma generated by a 10 640 Å radiation, with an irradiance of 1.4 × 10¹⁰ Wcm^− 2 on an Sn–Pb alloy (an Sn content of approximately 20%), in vacuum, was recorded at 0.8 µs, and analysed between 1900 and 7000 Å. The population-level distribution and corresponding temperature were obtained using Boltzmann plots. The electron density of the plasma was determined using well-known Stark broadening parameters of spectral lines. The plasma under study had an electron temperature of 13,200 K and an electron number density of 2 × 10¹⁶ cm^− 3. The experimental relative transition probabilities were put on an absolute scale using the branching ratio method to calculate Sn I multiplet transition probabilities from available radiative lifetime data of their upper states and plotting the Sn I emission spectrum lines on a Boltzmann plot assuming local thermodynamic equilibrium (LTE) to be valid and following Boltzmann's law. The LTE conditions and plasma homogeneity have been checked. Special attention was paid to the possible self-absorption of the different transitions. The experimental results obtained have been compared with the experimental values given by other authors.     

Atomic transition probabilities for selected Yb II lines emitted from a ferroelectric plasma source

The relative intensities of several hundred emission lines of Yb II between 200 nm and 900 nm were obtained with the use of ferroelectric plasma source. These relative intensities obtained for lines from 21 energy levels have been used to determine the line branching fractions, which have then been combined with accurate experimental radiative lifetime measurements to give absolute transition probabilities for 111 Yb II lines. The obtained values were compared with theoretical and experimental data taken from available literature.     

一阶速度-应力Biot双相各向同性介质弹性波

提出一种等价的一阶双曲型速度一应力Biot双相各向同性介质弹性波波动方程,以实现双相介质混合波场中纯快慢纵波和纯横波波场分离的问题.应用散度和旋度理论证明双相介质等价方程波场分离的可行性,采用高阶交错网格有限差分法构建高精度正演算子,推导其PML吸收边界条件和稳定性条件,并对均匀双相介质和层状非均匀双相介质模型进行数值...     

Complex permittivity, complex permeability and microwave absorption properties of ferrite-paraffin polymer composites

We have investigated the electromagnetic (EM) characteristics of Co_xMn_1−xFe₂O₄ spinel ferrite (where x=0.0, 0.5 and 1.0) nanoparticles (NPs)/paraffin nanocomposite material at 8-20 GHz. Co_xMn_1−xFe₂O₄ NPs have been synthesized by cetyltrimethylammonium assisted hydrothermal route using NaOH. A variation in complex dielectric permittivity and magnetic permeability at room temperature with frequency in the range 8-20 GHz has been studied. Particles showed phase purity and crystallinity in powder X-ray diffraction (XRD) analysis. At the same time, Co_xMn_1−xFe₂O₄ NPs demonstrated a spinel cubic structure from XRD results. A reflection loss of −46.60 dB was found at 10.5 GHz for an absorber thickness of 2 mm. Co_xMn_1−xFe₂O₄ may be attractive candidates for EM wave absorption materials.     

Electromagnetic properties and microwave absorption properties of BaTiO3-carbonyl iron composite in S and C bands

BaTiO₃ powders are prepared by sol-gel method. The carbonyl iron powder is prepared via thermal decomposition of iron pentacarbonyl. Then BaTiO₃-carbonyl iron composite with different mixture ratios was prepared using the as-prepared material. The structure, morphology, and properties of the composites are characterized using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction, scanning electron microscopy (SEM), and a network analyzer. The complex permittivity and reflection loss of the composites have been measured at different microwave frequencies in S- and C-bands employing vector network analyzer model PNA 3629D vector. The effect of the mass ratio of BaTiO₃/carbonyl iron on the microwave loss properties of the composites is investigated. A possible microwave absorbing mechanism of BaTiO₃-carbonyl iron composite has been proposed. The BaTiO₃-carbonyl iron composite can find applications in suppression of electromagnetic interference, and reduction of radar signature.     

Decision making with imprecise probabilities and utilities by means of statistical preference and stochastic dominance

A problem of decision making under uncertainty in which the choice must be made between two sets of alternatives instead of two single ones is considered. A number of choice rules are proposed and their main properties are investigated, focusing particularly on the generalizations of stochastic dominance and statistical preference. The particular cases where imprecision is present in the utilities or in the beliefs associated to two alternatives are considered.