Surface and interfacial properties of PVDF/acrylic copolymer blends before and after UV exposure

Morphological and chemical properties of both the surface and interface of poly(vinylidene fluoride)/poly(methyl methacrylate)-co-poly(ethyl acrylate) (PVDF/PMMA-co-PEA) blend films have been investigated before and after the samples were exposed to ultraviolet (UV) irradiation using a xenon arc lamp at 50 °C and 9% relative humidity (RH) for 7 months. Surface and interfacial morphologies were studied by atomic force microscopy (AFM). Chemical composition information was obtained by confocal Raman microscopy, attenuated total reflection-FTIR spectroscopy (ATR-FTIR), X-ray photoelectron spectroscopy (XPS), and contact angle measurements. Results show an enrichment of the PVDF material at the air surface, while the acrylic copolymer enriches the interface. Blends having greater than 50% mass fraction of PVDF show little change in the surface morphology after UV exposure for 7 months. However, for a lower PVDF content, blends exhibit significant degradation of PMMA-co-PEA copolymer and a much rougher surface after UV exposure. Microstructural changes in the PVDF spherulites are also observed after UV degradation. It is found that the surface and interfacial morphologies are correlated with the chemical properties.     

298K毛吸附溴化烷基三甲铵的性质及自由能

用液 /固吸附计量置换模型 ( SDM- A) ,研究了 2 98K羊毛纤维吸附溴化烷基三甲铵阳离子表面活性剂 CTAB和 DTAB的吸附等温线 ,结果表明它们均遵从 SDM- A的线性作图关系 .用 SDM-A的线性参数βα 和 q/z很好地描述了碳氢链长及加盐效应对于吸附性质的影响规律 ,特别是能定量地描述加盐效应对于吸附同时具有的促进和抵消两种相反作用的程度 ,并用 SDM- A的热力学 ,由线性参数计算得到了不同体系的吸附亲和能 ΔGA,解吸能 ΔGD 及总过程的自由能 ΔGP.一个吸附体系中 ,ΔGA 为常数且为较大的负值 ;ΔGD 为随溶液体相浓度 c增大而增大的正值 ;ΔGP为与 lgc呈线性关系的较小的负值 .计算所得结果能很好地解释实验事实 ,并可从更深层次上揭示吸附机理 .     

一种基于B/S的农业资源综合数据服务系统──通用农业资源数据服务系统开发设计

基于浏览器 /服务器 (B/S)结构的通用农业资源数据库系统 ,将农业统计中常用的 5 0 0多个技术指标分成三大类 ,17个小类 ,基本涵盖了农业生产和管理统计的主要领域 普通用户通过浏览器实现对数据库的组合查询或浏览 ,也可将数据文件下载 系统提供了 9种统计分析方法以及 5种预测方法 ,授权用户可进行数据文件上载 管理员通过浏览器可对数据库进行管理维护     

一种基于能带工程设计的CaAsSb/InP异质结双极晶体三极管

异质结晶体三极管（HBT）的性能与其材料体系密不可分，利用能带工程可以大大优化器件的结构，提高器件性能，文章从分析HBT的能带结构及设计要求入手，介绍了一种利用能带工程设计的基于GaAsSb/InP材料体系的新型HBT器件的结构及其性能，分析了该器件与其它材料体系器件相比所具有的优异特性，说明了对HBT的各区材料，其带边的相对位置所起的重要作用，最后，文章还报道了近期的实验情况，说明了GaAsSb/InP体系HBT的实际性能与理论预言一致。     

The Properties of Light Pressure Force with High Order in Laser Fields

1　Ｉｎｔｒｏｄｕｃｔｉｏｎ　　Ｉｎｒｅｃｅｎｔｙｅａｒｓ,ｂｏｔｈｔｈｅｔｈｅｏｒｅｔｉｃａｌａｎｄｅｘｐｅｒｉｍｅｎｔａｌｉｎｖｅｓｔｉｇａｔｉｏｎｓｏｎｌａｓｅｒｃｏｏｌｉｎｇａｎｄｔｒａｐｐｉｎｇｈａｖｅｂｅｃｏｍｅｏｎｅｏｆｔｈｅｍａｊｏｒｆｉｅｌｄｓｉｎａｔｏｍｉｃ,ｍｏｌｅｃｕｌａｒａｎｄｏｐｔｉｃａｌ ｐｈｙｓｉｃｓ[1～ 8] .Ｔｈｅｄｅｖｅｌｏｐｍｅｎｔｏｆｌａｓｅｒｃｏｏｌｉｎｇａｎｄｔｒａｐｐｉｎｇｔｅｃｈｎｏｌｏｇｙｉｓｉｍｐｏｒｔａｎｔｆｏｒｔｈｅａｐｐｌｉｃａｔｉｏｎｓｓｕ…     

The Hadamard Theorem and Borel–Carathéodory Theorem on Riemann Surfaces

In this paper, we first define a kind of pseudo–distance function and annulus domain on Riemann surfaces, then prove the Hadamard Theorem and the Borel–Carathéodory Theorem on any Riemann surfaces. Supported by NSFC 10501052     

Influence of SiO2 in SiCp on the microstructure and impact strength of Al/SiCp composites fabricated by pressureless infiltration

The effect of SiO₂ in SiC_p and the following processing parameters on the microstructure and impact strength of Al/SiC_p composites fabricated by pressureless infiltration was investigated: Mg content in the aluminum alloy, SiC particle size, and holding time. Preforms of SiC_p in the form of rectangular bars (10 × 1 × 1 cm) were infiltrated at 1150°C in an argon→nitrogen atmosphere for 45 and 60 min by utilizing two aluminum alloys (Al-6 Mg-11 Si and Al-9 Mg-11 Si, wt.%). The results obtained show that the presence of SiO₂ in SiC affects the microstructure and impact strength of the composites significantly. When Al₄C₃ is formed, the impact strength decreases. However, a high proportion of SiC to SiO₂ limits the formation of the unwanted Al₄C₃ phase in the composites. Also, a higher content of Mg in the Al alloy lowers the residual porosity and, consequently, increases the composite strength. The impact strength grows with decrease in SiC particle size and increases considerably when the residual porosity is less than 1%. Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 42, No. 3, pp. 401–418, May–June, 2006.     

ICP-AES测定饮用水源中的Cu、Mn、Pb、Cd、Zn

用ICP－AES法同时测定饮用水源中的Cu、Mn、Pb、Cd、Zn等重金属元素，具有基体效应小、测量范围宽等优点。检出限为0．2－4．0μg/L，回收率为91．5％－103．9％，相对标准偏差为0．29％－1．5％，测定密码样与实际样品，结果令人满意。     

自平衡式单臂双用扭矩定标器

本文指出了当前在科研和生产中采用的一般机械式扭矩加载器的某些缺点和错 误；提出一种自平衡式单臂双用纯扭矩加载装置，可以消除定标过程的附加干扰，保 证检测精度。该装置简单，合理、适用。