软件补偿方法在测温智能仪表中的应用

软件补偿方法具有效果好、精确度高、成本低的优点。介绍了在研制多点巡回检测仪中采用的几种软件补偿方法：前向通道特性补偿使放大器等元件不因外界条件的变化而受到任何影响；引线电阻的补偿可实现引线电阻对系统无任何影响；热电阻、热电偶的非线性度补偿效果明显，节省开销。     

用N-(3-P)NEM标记毛发角蛋白研究毛发中低硫蛋白和高硫蛋白的状态

本文用一种特异性标记蛋白质巯基的N-(3-P)NEM为荧光探针标记毛发角蛋白,经SDS-PAGE后,通过荧光薄层扫描确定N-(3-P)NEM与含巯基蛋白结合的部位。结果表明,毛发角蛋白中的低硫蛋白分子量在45,000～63,000范围,约占总蛋白量的49.6％～68.2％;高硫蛋白分子量在4,000～20,000范围,约占总蛋白量的18.9％～36.2％。除低硫和高硫蛋白以外,毛发角蛋白中还可能存在一种极低硫蛋白,分子量位于22,000～32,000范围。对人与5种动物的毛发角蛋白组分进行比较,证实人与动物的毛发角蛋白的主要差异在高硫蛋白,不同种属的动物毛发角蛋白中低硫蛋白和高硫蛋白的含量也不相同。作者认为毛发角蛋白中含巯基蛋白的差异可为动物分类学和法医学在进行毛发比较鉴别方面提供新的重要信息。     

一类泛圈图

本文证明了如果G是2连通无爪图,G不是圈,n=|v(G)|>q,G的每个导出子图A都满足φ(a_1,a_2),且G中不存在W′作为其导出子图,则G是泛圈图。     

中国邮路问题的0-1规划解法

在用“奇偶点图上作业法”求解“中国邮路问题”时,需检查图中的每一个回路.当图中回路较多时,检查不便且易出错.针对此,本文建立了求解“中国邮路问题”的0-1规划模型,并给出了算例。     

模型优适度辨识含水层补给进口的原理、方法和应用

本文阐述了一种新的研究成果——用模型优适度寻找含水层主进水口位置的原理、方法和应用。模型优适度作为衡量地下水模型场势与原型(矿区)场势相似拟合程度的量度,它凭借含水层地下水场势对源点的响应差异,判别模型源点位置与原型源点位置是否一致、接近或偏离。本文给出了模型优适度的计算公式和用统计分析方法对动态矩阵施行标准化的公式推演过程。通过多次模拟试验,绘出优适度的等值线图,为华北某矿圈定含水层补给范围,进行注浆堵水,大大地降低了矿井涌水量,在实践应用中获得初步成功。     

浮雕造型机器人运动规划

本文论述了一种结构简单，行之有效的机器人运动规划系统，能迅速判断机器人与工件的关系，实现浮雕造型机器人无碰撞轨迹规划．     

Si1－xGex/Si量子阱发光材料的分子束外延生长及其结构研究

采用固源Si分子束外延,在较高的生长温度于Si(100)衬底上制备出Si1－xGex/Si量子阱发光材料。发光样品的质量和特性通过卢瑟福背散射、X射线双晶衍射及光致发光评估。背散射实验中观察到应变超晶格的反常沟道效应;X射线分析表明材料的生长是共度的、无应力释放的,结晶完整性好。低温光致发光主要是外延合金量子阱中带边激子的无声发射和横光学声子参与的激子复合。并讨论了生长温度对量于阱发光的影响。     

管节点疲劳裂纹扩展规律和寿命估算

对Ｔ型管节点的疲劳试验进行分析，研究疲劳裂纹的扩展规律，用“柔度法”计算应力强度因子范围ΔＫ，确定材料常数ｃ，ｍ，提出并运用“直线－曲线模式法”估算管节点疲劳寿命，结果与试验吻合，具有一定的实用参考价值。     

Effect of borohydride as reducing agent on the structures and electrochemical properties of Pt/C catalyst

In this paper, we found that boron deposited on the surface of support when sodium borohydride used as reducing agent during the preparation of Pt/C catalyst. The deposition of boron markedly reduces particle size of Pt, raises electrochemical active surface (EAS) area of catalyst and electrochemical activity for hydrogen evolution or oxygen reduction reaction (ORR) compared with which prepared using other reducing agents (hydrogen and formaldehyde).     

Structural and magnetic properties of RF sputtered FePt/Fe multilayers

Series of [FePt(4min)/Fe(t_Fe)]₁₀ multilayers have been prepared by RF magnetron sputtering and post-annealing in order to optimize their magnetic properties by structural designs. The structure, surface morphology, composition and magnetic properties of the deposited films have been characterized by X-ray diffractometer (XRD), Rutherford backscattering (RBS), scanning electron microscope (SEM), energy dispersive X-ray spectroscope (EDX) and vibrating sample magnetometer (VSM). It is found that after annealing at temperatures above 500 °C, FePt phase undergoes a phase transition from disordered FCC to ordered FCT structure, and becomes a hard magnetic phase. X-ray diffraction studies on the series of [FePt/Fe]_n multilayer with varying Fe layer thickness annealed at 500 and 600 °C show that lattice constants change with Fe layer thickness and annealing temperature. Both lattice constants a and c are smaller than those of standard ones, and lattice constant a decreases as Fe layer deposition time increases. Only a slight increase in grain size was observed as Fe layer decreased in samples annealed at 500 °C. However, the increase in grain size is large in samples annealed at 600 °C. The coercivities of [FePt/Fe]_n multilayers decrease with Fe layer deposition time, and the energy product (BH)_max reaches a maximum in the samples with Fe layer deposition time of 3 min. Comparison of magnetic properties with structure showed an almost linear relationship between the lattice constant a and the coercivities of the FePt phase.