嵌段离聚物的制备及其络合和缔合性质

报道了一种氢化ＳＢＳ（ＳＥＢＳ）的化学改性方法，由此得到了一种基于ＳＥＢＳ的离聚物，其中ＰＳ嵌段接有少量羧酸盐基．用动态光散射和粘度法表征了基于ＳＥＢＳ的不同配对离子的磺酸离聚物在非极性溶剂中的缔合行为，给出了缔合物存在的证据和缔合物尺寸的定量数据．ＳＥＢＳ磺酸盐离聚物与含吡啶基的无规共聚物在稀溶液和本体中能形成分子间的络合物，这从共混物溶液粘度的反常增大和本体Ｔｇ的显著增加得到了证明．用粘度法、透射电子显微镜表征和证实了ＳＥＢＳ羧酸钠离聚物在水中可以形成稳定的胶体分散．疏水粒子为表面的离子基团所稳定．     

自由基活性聚合及其最新进展

本文介绍了实现自由基活性聚合的动力学、热力学条件及可能的途径。在这些条件下自由基保持稳定的低浓度，增长链自由基与休眠种处于动力学平衡动态，可有效地控制聚合反应，使聚合反应具有聚合物分子量随反应时间、单体转化率成线性增长关系及所得聚合物分子量分布较窄的特征，并且在加入第二单体时可继续生成嵌段共聚物。     

Comportement tensioactif des copolymères amphiphiles a séquence hydrophile polyélectrolyte

Résumé La courbe représentant, en fonction de la concentrationc, la tension interfaciale entre le toluène et une solution aqueuse d'un copolymère á blocs amphiphile á séquence hydrophile polyélectrolyte (polystyrène-b-polyvinyl-2-pyridine quaternisée au bromure d'éthyle) est foncièrement différente de celle que l'on obtient avec les détergents classiques.Les longues séquences polyélectrolytes ancrées á l'interface y établissent entre les deux phases une différence de potentiel électrique bien supérieure á celle que l'on obtient avec les détergents classiques. Il en résulte que le système reste éloigné de l'équilibre thermodynamique. Comme les énergies d'activation des processus d'adsorption et de désorption sont de nature différente, les courbes (,c) etablies en concentration croissante et décroissante sont non seulement distinctes, mais de caractères différents.

---

Summary Plotting the water toluene interface tension against the concentrationc, one gets quite different behaviours using classical detergents (Sodium laurylsulfate) or ampholytic block copolymers with polyelectrolytic hydrophilic sequence. (polystyrene-b-polyvinyl-2-pyridine quaternized with ethylbromid).These polyelectrolytic sequences build at the interface a much larger electric potential drop than usual detergents do. It follows that the system keeps far away from the thermodynamic equilibrium. Since adsorption and desorption processes have activation energies of different natures, it turns out that the (,c) curves are quite different in characters if constructed in growing or fallingc values.

---

Zusammenfassung Kurven, welche die Wasser-Toluol-Grenzflächenspannung als Funktion der Konzentrationc wiedergeben, sind für gewöhnliche Tenside und für Ampholytblock-Copolymere mit einer polyelektrolytartigen Sequenz, völlig verschiedenDie polyelektrolytartige Sequenz bildet an der Grenzfläche einen weitaus größeren elektrischen Potentialsprung als gewöhnliche Tenside. Daraus folgt, daß man dem thermodynamischen Gleichgewicht fern bleibt, und, da Ad- und Desorptionsprozesse unterschiedliche Aktivationsenergien besitzen, sind die (,c) Kurven mit steigenden und fallendenc-Werten völlig verschieden.

     

Thermosensitive polymeric vesicles self-assembled by PNIPAAm-b-PPG-b-PNIPAAm triblock copolymers

PNIPAAm-b-PPG-b-PNIPAAm triblock copolymers were prepared by redox polymerization. The self-assembly behavior and thermosensitive property of the copolymers in water were studied using ¹H-NMR, TEM and a UV spectrophotometer. The results showed that the LCST of the copolymers was 32 °C, which was consistent with that of pure PNIPAAm. The copolymers could form a vesicular structure in an aqueous solution by self-assembly. The hollow structure of the PNIPAAm-b-PPG-b-PNIPAAm vesicles combined with the temperature-sensitive property may enable many potential applications of the vesicles.     

聚醚聚酯嵌段共聚物共混物表面组成的ESCA研究

<正> 关于生物医用材料的微多相分离结构和适宜的亲、疏水性同它血液相容性间关系的研究已有不少文献报道。由于材料在使用时真正同血液相接触的只是材料的表面部分,因此材料的表面组成、结构和性质对它的血液相容性就具有更为直接的关系。对聚醚     

Morphology and transport properties of protons and methanol through partially sulfonated block copolymers

The morphological changes with different compositions of casting solvents in the membranes of sulfonated polystyrene-block-poly(ethylene-ran-butylene)-block-polystyrene (SEBS) were investigated with small-angle X-ray scattering (SAXS) and transmission electron microscope (TEM). Using the single solvent of tetrahydrofuran (THF) and the solvent mixtures of methanol/THF with different compositions, the casting polymer solutions were prepared for the membrane fabrication. The proton conductivity and the methanol permeability of membranes were measured, and the effect of morphological changes on the casting solvents was discussed through Flory–Huggins theory. It was found that the sulfonated SEBS membranes were transformed from well ordered lamellar to disordered co-continuous structure and the morphological difference caused abrupt enhancement in the proton conductivity and the methanol permeability as the concentration of methanol in the mixed solvents (MeOH/THF) increased.     

In vitro ageing and degradation of PEG-PLA diblock copolymer-based nanoparticles

Diblock copolymers composed of poly(oxy-ethylene) (POE) and poly(dl-lactic acid) segments were synthesized by anionic polymerization of d,l-lactide using the oxyanion formed by reaction of the monohydroxyl monomethoxy-poly(ethylene glycol) on sodium hydride. For comparison, a similar copolymer was prepared by using tin octoate to catalyze the lactide polymerization. The copolymers were used to make nanoparticles, which were stored at 4 °C. After a few months under these storage conditions, a dramatic decrease of the poly(ethylene glycol) content was observed, however, the mean diameter of the nanoparticles was not affected. The degradation of the nanoparticles was investigated in vitro under conditions selected to mimic physiological conditions. Changes of characteristics were monitored by ¹H NMR, SEC, DLLS and CZE on nanoparticles and/or on the degradation by-products dissolved in the ageing medium. According to their nanometric dimensions, the microparticles degraded very slowly and there was no difference in behaviour between the sodium hydride and the stannous octoate-derived copolymers.     

Homo and block copolymers of tert-butyl methacrylate by atom transfer radical polymerization

Atom transfer radical polymerization (ATRP) of tert-butyl methacrylate (tBMA) was investigated using cuprous bromide with different ligands, solvents, deactivators, etc. The polymerization in bulk and diphenyl ether solvent system performed using Cu(I)Br complexed with N, N, N′, N″, N″-pentamethyldiethylenetriamine (PMDETA) catalyst in conjunction with 2-bromopropionitrile as an initiator at room temperature showed a curvature in the first-order kinetic plot. The controlled polymerization in methanol solution resulted in slower rate of polymerization and lower molecular weights. Well-defined diblock copolymers of PSt-b-PtBMA synthesized by polystyrene bromo macroinitiator (PSt-Br) with Cu(I)Cl/PMDETA catalyst system yielded predetermined molecular weights and lower polydispersities. Otherwise, the Cu(I)Br/PMDETA catalytic system showed an inefficient polymerization of tert-butyl methacrylate with lower molecular weights and higher polydispersities. Subsequent hydrolysis of the homopolymer refluxed in dioxane with addition of HCl afforded well-defined poly(methacrylic acid).     

Synthesis and characterization of amphiphilic triblock polymers by copper mediated living radical polymerization

2-Dimethylaminoethyl methacrylate (DMAEMA) and 2-diethylaminoethyl methacrylate (DEAEMA) block copolymers have been synthesized by using poly(ethylene glycol), poly(tetrahydrofuran) (PTHF) and poly(ethylene butylenes) macroinitiators with copper mediated living radical polymerization. The use of difunctional macroinitiator gave ABA block copolymers with narrow polydispersities (PDI) and controlled number average molecular weights (M_n’s). By using DMAEMA, polymerizations proceed with excellent first order kinetics indicative of well-controlled living polymerization. Online ¹H NMR monitoring has been used to investigate the polymerization of DEAEMA. The first order kinetic plots for the polymerization of DEAMA showed two different rate regimes ascribed to an induction period which is not observed for DMAEMA. ABA triblock copolymers with DMAEMA as the A blocks and PTHF or PBD as B blocks leads to amphiphilic block copolymers with M_n’s between 22 and 24 K (PDI 1.24-1.32) which form aggregates/micelles in solution. The critical aggregation concentrations, as determined by pyrene fluorimetry, are 0.07 and 0.03 g dm⁻¹ for PTHF- and PBD-containing triblocks respectively.     

BLUE LIGHT-EMITTING COIL-ROD-COIL BLOCK OLIGOMERS WITH RIGID p-HEXAPHENYL AS CHROMOPHORE

The synthesis and characterization of coil-rod-coil triblock oligomers, poly（ethylene oxide）-b-p-hexaphenyl-b- poly（ethylene oxide）, are described. The number of repeating ethylene oxide units in each flexible block are 3 （EO3-PHP- EO3）, 8 （EOs-PHP-EO8）, 13 （EO13-PHP-EO13）, and 17 （EO17-PHP-EO17）, respectively. The structures of these oligomers are confirmed by ^1H-NMR, 13C-NMR, EA, and MALDI-TOF mass spectrometry. The introduction of soluble poly（ethylene oxide） coils to the rigid p-hexaphenyl segment significantly improves the solubility of the oligomers, so they can form smooth thin films by spin-coating from their solutions. The oligomers are quite thermally stable and have 1% weight loss temperatures at above 340℃ under nitrogen. They can emit strong blue light in both solution and film state, and have fluorescence quantum yields of about 40% in chloroform. They are expected to have potential applications in optoelectronic devices.