Characterization of a Pd-Fe bimetallic model catalyst

Small bimetallic Pd-Fe particles supported on a well ordered alumina film grown on NiAl (1 1 0) were studied focusing on the geometric, electronic, adsorption, as well as magnetic properties. The morphology, growth mode and surface composition were investigated by combining scanning tunneling microscopy (STM), temperature-programmed desorption (TPD) and infrared spectroscopy (IRAS) using CO as a probe molecule. Information on the electronic properties of the bimetallic systems was obtained by means of X-ray photoelectron spectroscopy (XPS). These measurements were amended by in situ ferromagnetic resonance spectroscopy to address the magnetic properties of the bimetallic particles. The subsequent deposition of the metals at 300 K varying the order of metal deposition resulted in two distinct bimetallic systems. Pd deposited on existing Fe particles forms a shell, however, FMR and XPS suggest that intermixing of Pd and Fe occurs to some extent. For the reverse order, a larger amount of Fe is required to coat Pd particles, due to the strong tendency of Pd to segregate to the surface of the particles.     

Thermodynamic and kinetic aspects on the selective surface oxidation of binary, ternary and quarternary model alloys

Segregation and selective oxidation phenomena of minor alloying elements during annealing of steel sheets lead to the formation of bare spots after hot dip galvanizing. In order to understand the influence of common alloying elements on the surface chemistry after annealing, model alloys of binary (Fe-2Si, Fe-2Mn and Fe-0.8Cr), ternary (Fe-2Mn-2Si, Fe-2Mn-0.8Cr and Fe-2Si-0.8Cr) and quarternary (Fe-2Mn-2Si-0.8Cr) systems were investigated. The specimens were annealed for 60 s at 820 °C in N₂-5% H₂ gas atmospheres with different dew points −80 and −40 °C, respectively. Surface chemistry of the annealed specimens was obtained by using X-ray photoelectron spectroscopy (XPS). The field emission scanning electron microscopy (FE-SEM) was used to view surface morphology. At low dew point −80 °C, apart from the thermodynamical calculations such as solubility product of oxides and their critical solute concentrations, kinetics play a decisive role on the selective oxidation, i.e. oxygen competition. As expected, the amount of external selective oxidation of alloying elements are well pronounced at higher dew point −40 °C. An attempt has been made to explain the dominant process of Si and Mn on Cr-oxidation and segregation. It is observed that annealing of quarternary system at higher dew point shifts the Cr-oxidation from external to internal.     

Optical, X-ray absorption and photoelectron spectroscopy investigation of the Co site configuration in Zn1−xCoxO films prepared by pulsed laser deposition

In this paper, we investigate the Co site configuration in Zn_1−xCo_xO thin films by means of different spectroscopic techniques. Thin films were prepared by pulsed laser deposition with Co proportion from 1% to 30%. The Co 2p doublet observed in the X-ray photoelectron spectra exhibits the spin–orbit splitting and shake-up satellites typical of Co⁺² ionization states. X-ray absorption spectra at the Co K-edge, taken in fluorescence mode, unambiguously show that Co atoms are in tetrahedral configuration substituting for Zn over the whole composition range. Optical absorption spectra provide further evidence of the tetrahedral coordination of Co cations, both through the internal transitions in the Co 3d shell and through the shift to higher energies of the band-to-band absorption edge with the increase of the Co proportion.     

Degradation of Y2SiO5:Ce phosphor powders

The degradation of the cathodoluminescence (CL) intensity of cerium-doped yttrium silicate (Y₂SiO₅:Ce) phosphor powders was investigated for possible application in low voltage field emission displays (FEDs). Auger electron spectroscopy (AES), X-ray photoelectron spectroscopy (XPS) and CL spectroscopy were used to monitor changes in the surface chemical composition and luminous efficiency of commercially available Y₂SiO₅:Ce phosphor powders. The degradation of the CL intensity for the powders is consistent with a well-known electron-stimulated surface chemical reaction (ESSCR) model. It was shown with XPS and CL that the electron stimulated reaction led to the formation of a luminescent silicon dioxide (SiO₂) layer on the surface of the Y₂SiO₅:Ce phosphor powder. XPS also indicated that the Ce concentration in the surface layer increased during the degradation process and the formation of CeO₂ and CeH₃ were also part of the degradation process. The CL intensity first decreased until about 300 C cm⁻² and then increased due to an extra peak arising at a wavelength of 650 nm.     

X‐ray photoelectron spectroscopic study of Tencel treated with a cationic β‐cyclodextrin derivative

The interaction and the durability to laundering of a cationic β‐cyclodextrin derivative applied to Tencel were examined by x‐ray photoelectron spectroscopy (XPS). The N1(s) XPS spectra of the cationic β‐cyclodextrin treated substrates revealed the presence of the applied finish on the fibre surface and that the durability of the applied finish to hand‐wash was good. However, the cationic β‐cyclodextrin derivative showed poor durability to the ISO CO6/C2S wash protocol. Copyright © 2009 John Wiley & Sons, Ltd.     

Effect of Mg doping on the electrical properties of SnO2 nanoparticles

Sol-gel derived Mg doped tin oxide (Sn_1−xMg_xO₂) nanocrystals were synthesized with x ranging between 0.5 and 7 at. %. Characteristic single phase tetragonal structure of pure and doped samples was obtained and doping saturation was inferred by X-ray diffraction analysis. Structural, morphological and phase informations were obtained by high resolution transmission electron microscope, field emission scanning electron microscope and X-ray photoelectron spectroscopy respectively whereas bonding information was obtained from Fourier transformed infrared spectroscopy. Measurement of different electrical parameters with frequency (200 Hz-10⁵ Hz) has been carried out at room temperature. Ultrahigh dielectric constant and metallic AC conductivity were observed for undoped tin oxide and the profiles reflected highly sensitive changes in the atomic and interfacial polarizability generated by doping concentrations. Relaxation spectra of tangent loss of any sample did not show any loss peak within the frequency range. Both the grain and grain boundary contributions are observed to increase as the doping concentration increased. Results of first principle calculation based on density functional theory indicated effective Fermi level (E_F) suppression due to Mg doping which is responsible for the experimentally observed conductivity variation. AC conductivity was found to depend strongly on the doping concentration and the defect chemistry of the compound. Mg doped SnO₂ may find applications as a low loss dielectric and high density energy storage material.     

Study by XPS of the chlorination of proteins aggregated onto tin dioxide during electrochemical production of hypochlorous acid

In solution, hypochlorous acid (HOCl) reacts with organic matter and notably with protein side-chains. In this study, HOCl was produced by an electrochemical way, by oxidation of chloride ions at a transparent tin dioxide electrode in the presence of a protein, the bovine serum albumin (BSA). A thick irregular layer is formed at the electrode when HOCl is produced at the SnO₂ surface. Indeed, SEM analyses show that an important deposit is formed during the anodic polarization of SnO₂ in the presence of chloride ions and proteins. Actually, two phenomena take place on the one hand the chlorination of the proteins due to the reaction of HOCl with some protein side-chains and on the other hand the aggregation of proteins onto the SnO₂ surface. The present X-ray photoelectron spectroscopy study points out the cross-linking of BSA molecules via formation of inter molecular sulfonamide groups. It also shows that the BSA chlorination is due on the one hand to the formation of sulfonyl chloride groups (-SO₂Cl) and on the other hand to formation of chloramine groups (N-Cl). The Cl2p and S2p photo-peak intensities allowed us to quantify the chloramines. It is found that, one BSA entity immobilized onto the SnO₂ surface contains about 50 chloramine groups.     

Composition assessment of ferric oxide by accurate peak fitting of the Fe 2p photoemission spectrum

A quantitative study of the surface composition of ferric oxide employing photoemission spectra is presented. It was possible to accurately reproduce the expected composition (Fe_2.00±0.05O₃) by modeling the background as a combination of Shirley‐type (Shirley–Vegh–Salvi–Castle) and slope backgrounds through the active approach. The line‐shape employed to fit apparent peak asymmetries was the double‐Lorentzian. It was possible to resolve a previously unreported satellite located at ~729 eV. Copyright © 2016 John Wiley & Sons, Ltd.     

ZnTe（ZnTe：Cu）多晶薄膜的XPS研究

用共蒸发法在室温下制备了ZnTe及ZnTe：Cu多晶薄膜，测量了电导率温度曲线，发现不掺杂的ZnTe薄膜的暗电导随温度的增加而线形增加，呈常规的半导体材料特征；掺Cu的ZnTe薄膜在温度较低时，lnσ随温度升高而缓慢增加，随后缓慢降低，达到一极小值，当温度继续升高时又陡然增加，呈现异常现象。用XPS研究了N2气氛下退火前后表面状态，发现不掺Cu的ZnTe薄膜呈现富Te现象。掺Cu后Te氧化明显，以ZnTe形式存在的Te明显减少；ZnTe：Cu薄膜中Zn的含量在退火前后变化明显，退火前，Zn主要以ZnTe形式存在，退火后Zn原子向表面扩散，使表面成分更加均匀，谱峰变宽；退火时，部分Cu原子进入晶格形成CuxTe相，引起载流子浓度变化，导致ZnTe：Cu多晶薄膜的电导温度关系异常。     

费-托合成制清洁燃料用担载纳米钴基催化剂制备中热处理对其结构和催化性能的影响

" 应用浸渍法在不同的焙烧条件(90~500 ℃)制备了一系列Al2O3担载钴基催化剂(质量含量为15%);采用XRD、XPS、程序升温还原对其进行了结构表征和分析,考察其在一氧化碳选择加氢制备清洁燃料用长链烷烃的反应中的催化性能．XPS结果表明,对于在90~200 ℃焙烧的催化剂,仍可观察到未完全分解的硝酸钴的存在;对于在200~500 ℃焙烧的几个催化剂可观察到Co3O4的物相．对于经过几种热处理制备的氧化铝担载的四个纳米钴基催化剂(200~500 ℃热处理),XRD和XPS结果表明四个样品中主要是9