含胺氯化钠微量元素盐结晶点阵规律研究

采用X射线衍射法,对含锌氯化钠晶体进行微观研究,通过对晶胞参数的分析与计算,具体地揭示了晶体中离子排列的点阵分布。同时对锌盐中存在着铜和铁离子情况下,讨论了铁、铜离子对结晶体中点阵分布的影响。     

徐州市奎河水质遗传毒理学分析

用蚕豆根尖细胞微核这一遗传毒理学技术,测定分析了市区奎河段水质的遗传学毒性,反映其污染情况。实验结果显示市区奎河段水质处于重度污染水平,部分水域的水质遗传毒理学指标很高,提示其中含有较多的污染物,对居民构成潜在的遗传毒性威胁。此外,对造成上述水域污染的原因进行了初步分析。     

硫喷妥钠在小鼠体内作用的时间节律

将体重为18—22g 的昆明品种小鼠,随机分成6个时间给药组,30只/组.在同一天的不同时间内,分组、逐只腹腔注射0.25%硫喷妥钠生理盐水溶液50mg/kg.给药后观察到硫喷妥钠在小鼠体内的作用表现为:麻醉诱导期短,6个组的平均值为2.85分钟;各组麻醉持续时间差异极显著(P<0.01),且揭示了麻醉持续时间之长短不仅受诸多因素影响,而且与体内“生物钟”的制约密切相关;麻醉持续时间与麻醉率具有一定程度的相关性.     

Engineering quadrupole magnetic flow sorting for the isolation of pancreatic islets

Quadrupole magnetic flow sorting (QMS) is being adapted from the separation of suspensions of single cells (<15 μm) to the isolation of pancreatic islets (150–350 μm) for transplant. To achieve this goal, the critical QMS components have been modeled and engineered to optimize the separation process. A flow channel has been designed, manufactured, and tested. The quadrupole magnet assembly has been designed and verified by finite element analysis. Pumps have been selected and verified by test. Test data generated from the pumps and flow channel demonstrate that the fabricated channel and peristaltic pumps fulfill the requirements of successful QMS separation.     

Electrochemical deposition and structural characterization of Au-Sn alloys

In the present work the electrochemical deposition of Au-Sn alloys is addressed and a cyanide-free process is presented. The electrolyte is an acidic thiourea solution containing gold as a Au[CS(NH₂)₂]⁺ complex and tin as stannous ions. Results concerning the plating process development and deposit characterization are reported. Au-Sn alloy films with a Sn content up to 50 at% and a single-phase structure can be obtained from the acidic thiourea–Au(I) solution under pulsed current plating conditions. Alloy deposits show three main crystal structures: a face centred cubic (fcc) Au(Sn) solid solution, extending up to 7 at% Sn; a hexagonal close-packed structure, of the same type as the metallurgical phase, up to about 18 at% Sn; and a NiAs-type structure, corresponding to the phase of the equilibrium diagram, with an enlarged homogeneity range. Mechanical properties of thin layers of Au-Sn alloys derived from micro-indentation measurements follow the structural modification with the alloy composition. The ordered intermetallic phases occurring in the equilibrium binary system, in particular the and phases at 8 at% and 16 at% Sn, respectively, are not detected in the electrodeposited alloys. The main factors controlling electrochemical phase formation are pointed out, considering the differences between the phase structure of the electrodeposited alloys and the equilibrium phase diagram.Presented at the 3rd International Symposium on Electrochemical Processing of Tailored Materials held at the 53rd Annual Meeting of the International Society of Electrochemistry, 15–20 September 2002, Düsseldorf, Germany     

Explicit Solution of a Non-Linear Filtering Problem for Lévy Processes with Application to Finance

In this paper we explicitly solve a non-linear filtering problem with mixed observations, modelled by a Brownian motion and a generalized Cox process, whose jump intensity is given in terms of a Lévy measure. Motivated by empirical observations of R. Cont and P. Tankov we propose a model for financial assets, which captures the phenomenon of time inhomogeneity of the jump size density. We apply the explicit formula to obtain the optimal filter for the corresponding filtering problem.     

信噪比对偏振耦合测试影响分析

以白光麦克尔逊干涉仪对双折射保偏光纤的偏振耦合进行测试,并基于仪器结构建立了测试扫描结果的数学模型.分析及仿真了信噪比对耦合强度及耦合位置检测的影响大小及变化趋势.信噪比大于32dB,可满足偏振耦合测试的要求.     

Thermosensitivity of red blood cells from Down's syndrome individuals

Biochemical disturbances of the reactive oxygen species metabolism revealed in subjects with Down's syndrome (DS), and the findings indicating that heat-induced cell alterations have been, at least, partly mediated by reactive oxygen species, made the elucidation of the response of trisomic cells to elevated temperatures of special interest. Kinetic analysis of cell-survival curves, accompanied by the flow cytometry and the scanning electron microscopy (SEM) examinations, and their relationship with the cell membrane fluidity, were undertaken. At each temperature (48-54 degrees C), Dq parameters, representing the ability to accumulate sublethal damages, were similar for both cell groups. D0 parameters (inverse leakage rates; D0 = 1/k) were greater for DS cells at each temperature below 54 degrees C. The haemolysis sensitivity ratio (HSR) showed that DS erythrocytes were, in average, 1.60 times more resistant to heat injury than those from normal subjects. Activation energies of haemolysis, calculated according to the Arrhenius equation, were similar both for normal (290.8 +/- 6.5 [kJ/mol]) and DS erythrocytes (288.0 +/- 5.5 [kJ/mol]). Flow cytometry studies showed that the scattering properties of intact DS erythrocytes (reflecting size, volume, shape and cell membrane surface morphology) were different than those of normal cells. Scanning electron micrographs and scattering diagrams obtained for cells submitted to heat stress (51 degrees C) confirmed that DS erythrocytes were more resistant, to a certain extent, to heat-induced disruption than normal cells. The steady-state fluorescence anisotropy of TMA-DPH (1-(4-trimethyl-ammoniumphenyl)-6-phenyl-1,3,5-hexatriene) showed that untreated DS erythrocytes had substantially lower fluidity (r = 0.356 +/- 0.008) of the outer monolayer of cell membranes as compared to normal cells (r = 0.324 +/- 0.011). The increase of the cell membrane fluidity during exposure to heat was observed. The greatest elevation of cell membrane fluidity occurred during the preleakage period, immediately upon the heat treatment and was considered as a rate-limiting step of heat-induced haemolysis.     

Characteristics of cobalt-based alloy coating on tool steel prepared by powder feeding laser cladding

Co-based alloy coating was deposited on tool steel by powder feeding laser cladding. Sections of such coatings were examined to reveal their microstructures and phases using scanning electron microscope (SEM) and X-ray diffractometer (XRD). The results showed that the prime phase (γ-Co dendrite) and other phases, including Cr₂₃C₆, Co₇W₆, and CrNi existed in the coatings. Some different solidification morphologies, such as planar (at the interface), cellular and dendrite formed, varying from the interface to the surface. Fine microstructures of γ-Co dendrite and lamellar eutectic in dendritical regions strengthened the coatings. Besides, the effects of aged treatment on the microstructure and microhardness of the surface coating were studied. Aged treatment led to the precipitations of some carbide particles (Cr₇C₃ and Co₃C) and boride particles (Co₄B) from the cladded coating, causing an increase in microhardness in the laser-cladded coating.     

Uptake of magnetic nanoparticles into cells for cell tracking

A challenge for future applications in nanotechnology is the functional integration of nano-sized materials into cellular structures. Here we investigated superparamagnetic Fe₃O₄ iron oxide nanoparticles coated with a lipid bilayer for uptake into cells and for targeting subcellular compartments. It was found that magnetic nanoparticles (MNPs) are effectively taken up into cells and make cells acquire magnetic activity. Biotin-conjugated MNPs were further functionalized by binding of the fluorescent tag streptavidin–fluorescein isothiocyanate (FITC) and, following uptake into cells, shown to confer magnetic activity and fluorescence labeling. Such FITC-MNPs were localized in the lysosomal compartment of cells which suggests a receptor-mediated uptake mechanism.