密度测量实验中仪器的正确使用与巧读数据

结合实验仪器的结构特点与工作原理,分别介绍了游标卡尺、螺旋测微计和物理天平的正确使用以及巧读数据的方法和步骤,指出并分析了实验教学过程中,在使用游标卡尺、螺旋测微计和物理天平及读数中常见的一些错误和问题。     

基于多元时间序列融合的飞行动作识别方法

针对飞行动作数据随机性强与长度不一致的问题,提出通过减小动态时间规整(DTW)算法的搜索空间,并定义不同特征参数贡献度的概念,实现对飞行数据的多元时间序列融合,从而完成对战术机动动作的识别。通过引入预分类和细分类结合的方式,对动作数据进行预处理,然后根据改进的动态时间规整(WDTW)算法对待测数据进行识别。仿真实验表明,相比传统DTW算法,WDTW算法通过降低算法复杂度,识别计算时间变化明显;对核密度与精准度系数的分析表明识别准确率亦有所提高。实验结果验证了所提方法的准确性。     

漳州某基坑抽水引起地面沉降的初探

由于基坑快速抽水导致基坑周边地面沉降。通过对场地因抽水引起地面沉降的计算和试抽水等方面的前期工作,分析了因基坑降水对地面沉降的影响,并据此来调整完善基坑降水方案,取得了明显的社会和经济效益。     

反渗透系统的设计思路探讨

反渗透作为一种重要的水处理技术,越来越广泛地应用到各种领域,其处理水源也变得复杂多样化,因此要求在反渗透系统和反渗透预处理设计时予以高度关注。本文主要讨论针对不同水源时反渗透系统的设计思路。     

高校图书馆的阅读治疗服务对大学生心理健康的作用

分析了大学生产生心理疾病的原因,探讨了"阅读治疗"对大学生心理健康的作用,提出了高校图书馆开展阅读治疗的措施。     

A novel synthesis of 5-perfluorophenyl 4,5-dihydro-1H-pyrazoles in THF or water

5-Perfluorophenyl 4,5-dihydro-1H-pyrazoles were synthesized from 1,3-dipolar cycloaddition reaction of perfluorobenyl 2,4,6-triisopropylbenzenesulfonylhydrazone and α,β-unsaturated carbonyl compounds or acrylonitrile in THF or water. It was worthy to note that better results were obtained when water was employed as the solvent, which was considered as an effective, economic and environmentally friendly method to synthesize these pyrazole derivatives.     

利用小波变换进行海上目标识别研究

对海面舰船目标类型的识别,通常采用目视判读的方法。由于目视判读的方法不利于大面积侦察任务的快速识别,所以根据海上目标所具有的背景单一、结构复杂的特点,提出了利用小波变换所具有的多分辩率、易于消除噪声、运算方便的特点来提取舰船边缘特征,建立舰船结构特征数据库,实现舰船目标类型的自动判读。试验证明效果很好。     

Hydroxylation-induced modifications of the Al2O3/NiAl(0 0 1) surface at low water vapour pressure

STM, STS, LEED and XPS data for crystalline θ-Al₂O₃ and non-crystalline Al₂O₃ ultra-thin films grown on NiAl(0 0 1) at 1025 K and exposed to water vapour at low pressure (1 × 10⁻⁷-1 × 10⁻⁵ mbar) and room temperature are reported. Water dissociation is observed at low pressure. This reactivity is assigned to the presence of a high density of coordinatively unsaturated cationic sites at the surface of the oxide film. The hydroxyl/hydroxide groups cannot be directly identify by their XPS binding energy, which is interpreted as resulting from the high BE positions of the oxide anions (O_1s signal at 532.5-532.8 eV). However the XPS intensities give evidence of an uptake of oxygen accompanied by an increase of the surface coverage by Al³⁺ cations, and a decrease of the concentration in metallic Al at the alloy interface. A value of ∼2 for the oxygen to aluminium ions surface concentration ratio indicates the formation of an oxy-hydroxide (AlO_xOH_y with x + y ∼ 2) hydroxylation product. STM and LEED show the amorphisation and roughening of the oxide film. At P(H₂O) = 1 × 10⁻⁷ mbar, only the surface of the oxide film is modified, with formation of nodules of ∼2 nm lateral size covering homogeneously the surface. STS shows that essentially the valence band is modified with an increase of the density of states at the band edge. With increasing pressure, hydroxylation is amplified, leading to an increased coverage of the alloy by oxy-hydroxide products and to the formation of larger nodules (∼7 nm) of amorphous oxy-hydroxide. Roughening and loss of the nanostructure indicate a propagation of the reaction that modifies the bulk structure of the oxide film. Amorphisation can be reverted to crystallization by annealing under UHV at 1025 K when the surface of the oxide film has been modified, but not when the bulk structure has been modified.