流动注射在线液-液萃取火焰原子吸收法测定水中痕量铅

提出了一种流动注射在线液－液萃取火焰原子吸收直接测定水中痕量铅的分析方法。实验以APDC为螯合剂,用MIBK为萃取剂,研究了在线萃取中各种实验参数、酸度条件的影响,考察了共存元素的干扰。方法的RSD（n=12)为2．7％,测定检出限为3．1μg/L,回收率为96％－106％。     

测定利血平的流动注射化学发光新体系

研究了利血平在酸性条件下与高碘酸钾和过氧化氢产生化学发光的行为 ,建立了高碘酸钾 -利血平 - H2 O2 - H2 SO4 流动注射化学发光新体系。利血平的浓度在 1 .0× 1 0 - 6～ 1 .0× 1 0 - 4g/m L范围内与化学发光强度呈良好的线性关系 ,检出限为 2 .7× 1 0 - 7g/m L。对 2× 1 0 - 5g/m L利血平进行 1 1次平行测定 ,得该法的相对标准偏差为 2 .63%。方法用于利血平片剂含量的测定 ,结果与药典法测得值一致     

催化动力学-流动注射停流分光光度法测定微量汞的研究

设计了分光光度自动分析系统的硬、软件 ,利用汞 ( )对藏红 T-碘化钾体系的催化褪色作用 ,建立了微量汞的催化动力学 -流动注射停流分光光度自动测定方法。Hg( )含量在 0～ 6.0 μg/m L范围内符合比尔定律 ,检出限为 3.5×1 0 -7g/m L,分析频率为 2 0 s/h。方法用于合成样品及污水中汞的测定 ,回收率为95.6%和 98.5% ,相对标准偏差为 5.1 %和 4.5% ( n=9     

Flow injection chemiluminescence determination of polyhydroxy phenols using luminol-ferricyanide/ferrocyanide system

It was found that the weak chemiluminescence produced from the reaction of polyhydroxy phenols with luminol in alkaline solution could be strongly enhanced by ferricyanide and ferrocyanide. Based on this found, a new flow injection chemiluminescence method is proposed for the determination of four polyhydroxy phenols: pyrogallol, phlorglucinol, quinol and resorcinol. The detection limits of the method are 0.03 μg ml⁻¹ pyrogallol, 0.03 μg ml⁻¹ phlorglucinol, 0.04 μg ml⁻¹ quinol, and 0.02 μg ml⁻¹ resorcinol. The possible mechanism of CL reactions is also discussed briefly.     

流动注射树脂相光度法联用单片机测定铜

基于铜（Ⅱ）与2-[（5-溴-2-吡啶）偶氮]-5-（二乙胺基）苯酚（5-Br-PADAP)形成稳定络合物的性质,利用717型阴离子交换树脂作为吸附载体,建立了流动注射树脂相吸光光度法测定铜的新方法,并联用单征机实现测定过程的程序化、自动化。此法已成功用于铜尾矿中铜的测定。     

A structure-based design approach to advance the allyltyrosine-based series of HIV integrase inhibitors

As of mid-2017, only one structure of the human immunodeficiency virus (HIV) integrase core domain co-crystallised with an active site inhibitor was reported. In this structure (1QS4), integrase is complexed with a diketo-acid based strand-transfer inhibitor (INSTI). This structure has been a preferred platform for the structure-based design of INSTIs despite concerns relating to structural irregularities arising from crystallographic packing effects. A survey of the current pool of 297 reported integrase catalytic core structures indicated that the anatomy of the active site in the complex structure 1QS4 exhibits subtle variations relative to all other structures examined. Consequently, the 1QS4 structure was employed for docking studies. From the docking of twenty-seven allyltyrosine analogues, a 3-point inhibitor binding motif required for activity was established and successfully utilised in the development of a tripeptide displaying an EC₅₀ value of 10 ± 5 μM in HIV infected human T-cells. Additional docking of “in-house” compound libraries unearthed a methyl ester based nitrile derivative displaying an IC₅₀ value of 0.5 μM in a combined 3′-processing and strand-transfer assay.     

Enhanced process development using automated continuous reactors by self-optimisation algorithms and statistical empirical modelling

Reaction optimisation and understanding is fundamental for process development and is achieved using a variety of techniques. This paper explores the use of self-optimisation and experimental design as a tandem approach to reaction optimisation. A Claisen-Schmidt condensation was optimised using a branch and fit minimising algorithm, with the resulting data being used to fit a response surface model. The model was then applied to find new responses for different metrics, highlighting the most important for process development purposes.     

连续流动分析仪法测定水溶肥中氧化钾

采用连续流动分析仪法测定水溶肥中氧化钾含量,并与NY/T 1977-2010进行比较。结果表明,样品溶液中氧化钾在0～400mg/L范围内线性良好,相关系数r=0.9995,与四苯硼酸钾重量法结果比对结果接近,绝对偏差小于0.23%,准确度高,加标回收率在98.2%～100.6%之间,重现性良好,10次重复测定相对标准偏差为0.22%。     

Paired Electrolysis of Aldoses in a Divided Flow Cell

Simultaneous anodic oxidation and cathodic reduction of aldoses in a divided flow cell were studied. The stream of the anolyte was an aqueous solution containing D-glucose, sodium bromide, and sodium bicarbonate. The stream of the catholyte was also an aqueous solution containing xylose and sodium sulfite. The factors which affected both the anodic and cathodic reactions were studied. The results indicate that the flow rates and temperatures of the anolyte and the catholyte, concentrations of the aldoses, pH values and the material of electrodes significantly affect both anodic and cathodic yields. The selectivities of gluconic acid in the anode and xylitol in the cathode were very high. The power consumption of paired electrolysis in the flow system was less than paired electrolysis in a batch system.     

Recent advances in electric analysis of cells in microfluidic systems

Microfluidics offers an ideal platform to integrate cell-based assays with electric measurements. The technological advances in microfluidics, microelectronics, electrochemistry, and electrophysiology have greatly inspired the development of microfluidic/electric devices that work with a low number of cells or single cells. The applications of these microfluidic systems range from the detecting of cell culture density to the probing of cellular functions at the single-cell level. In this review, we introduce the recent advances in the electric analysis of cells on a microfluidic platform, specifically related to the quantification and monitoring of cells in static solution, on-chip patch-clamp measurement, and examination of flowing cells. We also point out future directions and challenges in this field. Figure Different microfluidic devices applied to electrical analysis of cells