An analytical proof of Hardy-like inequalities related to the Dirac operator

We prove some sharp Hardy-type inequalities related to the Dirac operator by elementary, direct methods. Some of these inequalities have been obtained previously using spectral information about the Dirac-Coulomb operator. Our results are stated under optimal conditions on the asymptotics of the potentials near zero and near infinity.     

The influence of hard‐segments on two‐phase structure and shape memory properties of PCL‐based segmented polyurethanes

Poly(ε‐caprolactone)‐based segmented polyurethanes (PCLUs) were prepared from poly(ε‐caprolactone) diol, diisocyanates (DI), and 1,4‐butanediol. The DIs used were 4,4′‐diphenylmethane diisocyanate (MDI), 2,4‐toluenediisocyanate (TDI), isophorone diisocyanate (IPDI), and hexamethylene diisocyanate (HDI). Differential scanning calorimetry, small‐angle X‐ray scattering, and dynamic mechanical analysis were employed to characterize the two‐phase structures of all PCLUs. It was found that HDI‐ and MDI‐based PCLUs had higher degree of microphase separation than did IPDI‐ and TDI‐based PCLUs, which was primarily due to the crystallization of HDI‐ and MDI‐based hard‐segments. As a result, the HDI‐based PCLU exhibited the highest recovery force up to 6 MPa and slowest stress relaxation with increasing temperature. Besides, it was found that the partial damage in hard‐segment domains during the sample deformation was responsible for the incomplete shape‐recovery of PCLUs after the first deformation, but the damage did not develop during the subsequent deformation. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 557–570, 2007     

Liquid Chromatography-Mass Spectrometry Determination of Six 5-Nitroimidazoles in Animal Feedstuff

A liquid chromatography-mass spectrometry method for the determination of the coccidiostats metronidazole, ronidazole, dimetridazole, secnidazole, tinidazole and ipronidazole in feedstuff was developed. The 5-nitroimidazoles were extracted from animal feed with a pH 2 phosphate buffer solution followed by a solid phase extraction procedure based on HLB cartridges. The liquid chromatographic separation of the extracts was performed on a C₁₈ bonded silica column applying a gradient of elution with pH 4.3 ammonium acetate buffer solution and acetonitrile. Quantification for each 5-nitroimidazole was carried out monitoring its molecular ion [M + H]⁺ obtained by positive electrospray ionisation mode. A pool of feedstuffs was used to optimise and validate the method. Linearity, quantification limit, intra-day and inter-day reproducibility and accuracy were estimated using this pool of feedstuffs spiked with the drugs. For the confirmatory assay, several fragment ions from each 5-nitroimidazole were obtained and monitored. The method was applied successfully to determine 5-nitroimidazoles in feedstuff at level of 0.05 mg kg⁻¹.     

Electron-active cyclotron resonance in p-doped InMnAs in high magnetic fields

We present a theoretical and experimental study of electron-active cyclotron resonance in p-doped InMnAs in high magnetic fields. Results are based on an 8-band Pidgeon–Brown model generalized to include finite k_z effects and s(p)–d exchange interaction between itinerant carriers and Mn d-electrons. The e-active transitions in the valence band in p-doped samples take place due to the nature of multiple valence bands (heavy and light holes). We have calculated the absorption spectra in high magnetic fields and identified optical transitions which contribute to the cyclotron resonance for both e-active and h-active polarizations. Calculations show agreement with experimental results.     

Synthesis of Methyl 2-(5-Arylidene-2,4-dioxotetrahydrothiazol-3-yl)propionates

A series of methyl 2-(arylidene-2,4-dioxotetrahydrothiazol-3-yl)propionates were prepared. A study of the 3D structure was performed. The log P values are given for all the synthesized compounds.     

Crystallographic report: Crystal structure of tetra(4‐methyl‐5‐imidazole‐carboxyaldehyde)zinc(II) diperchlorate

The central zinc(II) atom in the title complex is tetrahedrally coordinated by four nitrogen atoms derived from 4‐methyl‐5‐imidazolecarboxyaldehyde ligands with Zn? N in the range 2.007(3) to 2.026(4) Å. Copyright © 2003 John Wiley & Sons, Ltd.     

New 6-Arylsulfonyl-1,2-benzoisothiazol-3(2H)-one 1,1-Dioxides Derived from Diphenyl Sulfone Monosulfonyl Chlorides

Various methods were studied for the oxidation of 2-methyl-5-(phenylsulfonyl)benzenesulfamide and its derivatives. The oxidation by sodium dichromate in sulfuric acid was found most efficient. The effects of temperature, concentration, reagent ratio, and time of the oxidation reaction on the yield of the desired product were investigated. Conditions were proposed for obtaining the desired product in yields up to 95%. A synthesis was developed for a series of new saccharin derivatives.     

Tetraphenylantimony carboxylates in the cascade Pd-catalyzed C-phenylation reaction of methyl acrylate in the presence of peroxide

Tetraphenylantimony(V) carboxylates have been used in the palladium-catalyzed C-phenylation reaction of methyl acrylate in the presence of (PhCO₂)₂ or t-BuOOH under mild conditions (50 °C). The peroxides promote a cascade participation of the organoantimony compound and result in the transfer of three phenyl groups. Organoantimony intermediates have been isolated from the reaction.     

Fatigue Loading and Life Prediction in Three Fretting Fatigue Fixtures

Three fixtures for conducting laboratory fretting fatigue tests are described and their respective testing methods and the results of the analysis are compared. Each of these fixtures has been used to investigate the effects of various parameters of interest in fretting fatigue. These fixtures include a unique apparatus in which all load applied to the specimen is transferred to the fretting pads, an apparatus similar to many found in the literature where partial load transfer occurs across the pads, and a simplified dovetail fixture in which the clamping load, P, and the shear load, Q, are varied in phase. Select test conditions from prior experiments performed on identical material and resulting in similar lives ranging from one to ten million cycles from these fixtures are identified. The various testing conditions were used to compute the unique stress field for each case. The resulting contact stresses were used to calculate crack initiation based criteria, and to calculate stress intensity factors. The three fixtures were shown to be able to accommodate a range of loads, fretting pad contours, and specimen geometries that produced a variety of stress fields. A crack-initiation-based criterion was shown to predict the failure lives of thinner specimens accurately. The stress intensity factor calculations showed the possibility of a crack arresting for a stress field that decays rapidly and the possibility of a local minimum for K as a function of depth. The fixtures are shown to be complementary in generating data for development of robust fretting fatigue models that use these criteria.