SUPERCRITICAL-PHASE PROCESS FOR SELECTIVE SYNTHESIS OF HEAVIER HYDROCARBONS FROM SYNGAS OVER ARu/Al_2O_3 CATALYST

在Ｒｕ／Ａｌ２Ｏ３催化剂上进行了超临界条件下的固定床费托合成。研究了催化剂孔尺寸、α－Ｃ１４烯共进料和反应温度对费托合成产物分布的影响     

Addition of diazocyclopropane generatedin situ to vinyl bromide and chemical transformations of the resulting 5-bromospiro(1-pyrazoline-3,1′-cyclopropane)

The reaction of diazocyclopropane generatedin situ with vinyl bromide occurs as regioselective 1,3-dipolar cycloaddition to give 5-bromospiro(1-pyrazoline-3,1′-cyclopropane) in ∼60% yield. Reactions of the latter with nucleophilic reagents, which can occur both with retention and opening of the cyclopropane ring, were studied. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 688–690, April 1998.     

Thermochemistry of interactions of Na+ with benzo-15-crown-5 ether in acetonitrile-water mixtures at 298.15 K

Enthalpies of dissolution of benzo-15-crown-5 ether (B15C5) in mixtures of acetonitrile with water and in solutions of NaI and NaBPh₄ (I=0.05 mol dm^–3) in these mixtures were measured at 298.15 K. From the obtained results and appropriate literature data, the thermodynamic functions of B15C5/Na⁺ complex formation in acetonitrile-water mixtures were determined. The enthalpies of transfer of the complex B15C5/Na⁺ from pure acetonitrile to the examined mixtures were calculated and are discussed.     

Binding Ensembles of p53-MDM2 Peptide Inhibitors by Combining Bayesian Inference and Atomistic Simulations

Designing peptide inhibitors of the p53-MDM2 interaction against cancer is of wide interest. Computational modeling and virtual screening are a well established step in the rational design of small molecules. But they face challenges for binding flexible peptide molecules that fold upon binding. We look at the ability of five different peptides, three of which are intrinsically disordered, to bind to MDM2 with a new Bayesian inference approach (MELD × MD). The method is able to capture the folding upon binding mechanism and differentiate binding preferences between the five peptides. Processing the ensembles with statistical mechanics tools depicts the most likely bound conformations and hints at differences in the binding mechanism. Finally, the study shows the importance of capturing two driving forces to binding in this system: the ability of peptides to adopt bound conformations (ΔGconformation) and the interaction between interface residues (ΔGinteraction).     

高效液相色谱-串联质谱法同时测定表层水体中5类40种抗生素

建立了固相萃取-高效液相色谱-串联质谱（SPE-HPLC-MS/MS）同时检测表层水中5类40种抗生素的分析方法。水样经过滤、固相萃取柱富集净化后，以乙腈-0.2%（v/v）甲酸水溶液为流动相进行梯度洗脱，采用电喷雾电离源，在多反应监测、正离子模式进行定性定量分析。结果显示，40种抗生素在1~200 μg/L水平下线性关系良好，平均加标回收率为41.3%~112.6%。采用该方法对长江南京段表层水体进行检测，共检出13种抗生素，含量为13.4~780.5 ng/L，其中喹诺酮类抗生素恩诺沙星检出率达100%，大环内酯类抗生素克林霉素最高检出水平达739.4 ng/L。该法高效、灵敏、可靠，可用于实际水样中多种抗生素的分析。     

掺银的Sm0.5Sr0.5CoO3中温固体氧化物燃料电池复合阴极材料的制备与性能研究

采用硝酸盐分解方法在Sm0.5Sr0.5CoO3 (SSC)中掺入少量的银 (Ag), 形成可用于SOFC的多孔阴极材料 (SSC-Agx). 通过X射线衍射测试确定了材料的物相组成; 用SEM观测了中温电解质Ce0.8Sm0.2O1.9表面涂层电极的微结构; 利用电化学极化曲线和阻抗谱研究了这些材料中低温 (500～800 ℃)电化学性能, 确定掺Ag量和烧结温度对阴极电化学性能的影响. 结果表明, SSC在中温区掺20% Ag时具有最佳的电化学性能, 在600 ℃阴极总阻抗是SSC的1/11, 在750 ℃为SSC的1/4, SSC中掺Ag是提高阴极在中温区电化学性能的有效途径.     

Influence of the texture of chromia catalysts on their activity in synthesis of 2-methylthiophene

The texture of Cr₂O₃-K₂O/Al₂O₃catalysts containing oxides of rare earth elements (REE) was studied. The catalysts are used for the synthesis of 2-methylthiophene by the reaction of H₂S with n-pentane or piperilene. The heterocyclization of n-pentane is a consecutive reaction involving a step of dehydrogenation of initial hydrocarbon. At this step the texture of the catalyst affects the yield of 2-methylthiophene. The yield of 2-methylthiophene obtained from piperilene and I₂S is independent of the catalyst texture.     

6-Arylamino-3-methyl-7H-[1,2,4]triazolo[3,4-b][1,3,4]thiadiazines: Novel N-Arylamidine Structures

We propose a method for obtaining derivatives of 7H-[1,2,4]triazolo[3,4-b][1,3,4]thiadiazine by alkylation of 4-amino-5-methyl-4H-1,2,4-triazole-3-thiol by substituted -chloroacetanilides, followed by cyclization of the intermediate by phosphorus oxychloride.     

The phase diagram of KNO3-KClO3

The binary phase diagram of KNO₃-KClO₃ is studied by means of differential scanning calorimetry (DSC) and high-temperature X-ray diffraction. The limited solid solutions, K(NO₃)_1−x(ClO₃)_x (0<x<0.20) and K(NO₃)_1−x(ClO₃)_x (0.90<x<1.0), were formed in the KNO₃-based solid solutions and KClO₃-based solid solutions phase, respectively. For KNO₃-based solid solutions, KNO₃ ferroelectric phase can be stable from 423 to 223 K as a result of substituting of NO₃ by ClO₃-radicals. The temperatures for solidus and liquidus have been determined based on limited solid solutions. Two models, Henrian solution and regular solution theory for KNO₃-based (α) phase and KClO₃-based (β) phase, respectively, are employed to reproduce solidus and liquidus of the phase diagram. The results are in good agreement with the DSC data. The thermodynamic properties for α and β solid solutions have been derived from an optimization procedure using the experimental data. The calculated phase diagram and optimized thermodynamic parameters are thermodynamically self-consistent.     

Photoinitiators for UV and visible curing of coatings: Mechanisms and properties

The radiation curing industry is one of the most rapidly developing fields in the entire coatings industry. The low toxicity, cheapness, speed, control and ease of formulation and operation are some of the main advantages of this growing technology. UV and/or visible light radiation is used to induce photochemical polymerization or crosslinking of a monomer, oligomer or prepolymer formulation containing a certain type of unsaturation, such as an acrylic group, and an appropriate initiator. The latter is used to absorb the light energy and transform it into active species, such as radicals or ions, capable of inducing such reactions. Applications extend to general coatings for paper, board, wood, tapes, compact discs and holograms, inks, photoresists for imaging processes and adhesives for welding and sealing in electronic circuit boards. The photoinitiator is the key to the control of these processes and, in recent years, has seen many new developments. These include the need for water-soluble, co-reactive and polymeric structures with low migration rates, as well as cheaper UV/ visible sensitizers with enhanced speed. New and effective cationic systems are also on the scene and, although expensive, are attracting significant academic and commercial interest.