Electrical characterization of Schottky diodes based on boron doped homoepitaxial diamond films by conducting probe atomic force microscopy

A large planar tungsten carbide (WC) Schottky diode on p-type homoepitaxial diamond was mainly investigated on a microscopic level by atomic force microscopy (AFM) and conducting probe atomic force microscopy (CP-AFM), allowing simultaneous topographic and local electrical resistance imaging measurements. These techniques revealed the existence of a specific microstructure on the WC Schottky contact consisting of electrically insulating islands surrounded by conductive paths. The islands are found to be insulating in the whole range of explored bias [−5 V, +5 V], whereas the current flowing between the islands is 1000 times lower at a reverse bias of −5 V than at a forward bias of +5 V, in agreement with the rectifying ratio found from macroscopic current–voltage (I–V) measurements. CP-AFM provides a prospective imaging tool which is well suited for analyzing the local electrical properties and instabilities of Schottky junctions.     

Ultra-thin film growth of titanium dioxide on W(1 0 0)

We have employed low energy electron diffraction (LEED) and X-ray photoelectron spectroscopy to follow the epitaxial growth of thin films of TiO₂ on W(1 0 0). The films were grown both by metal vapour deposition of titanium onto the substrate in UHV with subsequent annealing in a low partial pressure of oxygen, and by metal vapour deposition in a low partial pressure of oxygen. LEED patterns showed the characteristic patterns of (1 1 0) oriented rutile. A systematic spot splitting was observed and attributed to a stepped surface. The calculated step height was found to be in good agreement with that expected for rutile TiO₂(1 1 0), 3.3 Å. Titanium core level shifts were used to identify oxidation states as a function of film thickness allowing the interpretation in terms of a slightly sub-stoichiometric interface layer in contact with the substrate. In combination with the LEED patterns, the film structure is therefore determined to be (1 1 0) oriented rutile with a comparable level of stoichiometry to UHV prepared bulk crystals. The ordered step structure indicates considerable structural complexity of the surface.     

Growth and oxidation of Cr films on the W(1 0 0) surface

The growth and oxidation of Cr films on the W(1 0 0) surface have been studied with low energy electron microscopy (LEEM) and diffraction (LEED). Cr grows in a Stranski-Krastanov (SK) mode above about 550 K and in a kinetically limited layer-by-layer mode at lower temperature. Stress relief in the highly strained pseudomorphic (ps) Cr film appears to be achieved by the formation of (4 × 4) periodic inclusions during the growth of the third layer between 575 and 630 K and by growth morphological instabilities of the third layer at higher temperature. Kinetic or stress-induced roughening is observed at lower temperature. In the SK regime, three-dimensional (3D) Cr islands nucleate after the growth of three Cr layers. 3D island nucleation triggers dewetting of one layer from the surrounding Cr film. Thus, two ps Cr layers are thermodynamically stable. However, one and two layer ps Cr films are unstable during oxidation. 3D clusters, that produce complex diffraction features and are believed to be Cr₂O₃, are formed during oxidation of one Cr layer at elevated temperature, T ? 790 K. The single layer Cr film remains intact during oxidation at T ? 630 K. 3D bulk Cr clusters are formed predominantly during oxidation of two ps Cr layers.     

钨合金的冲击动力学性质及细微观结构的影响

简单介绍了钨合金(主要为W-Ni-Fe)的制备工艺和常用热处理方法,其后着重从动 态力学性能、剪切带的实验观察和研究、细微观结构对材料力学性能的影响等几方 面总结和评述了近年来针对钨合金取得的主要结果.并在文章的最后初步提出了有 前景的几个研究方向.     

氧化钛负载脱硝催化剂的碱中毒过程：氧化钒的保留和氧化钨的牺牲

V2O5-WO3/TiO2催化剂目前已广泛用于电厂和工业锅炉燃烧废气脱硝,但燃烧原料煤及石油中含有的杂质元素碱金属与碱土金属元素可吸附在催化剂上,不仅会减少催化剂酸性位的数量,还会与催化活性元素结合生成惰性物种,导致催化剂失活。因此,已有许多有关钒钨钛催化剂碱中毒的研究,从催化剂的氧化还原能力、酸性位损失及表面孔结构等方面进行了讨论。但这些研究大多集中在碱中毒对活性组分V2O5的影响及中毒催化剂的活性变化,很少涉及催化剂中WO3的作用,也缺乏有关不同活性元素与钾盐反应的实验证据。本文采用过量浸渍法制备了不同钒和钨含量的钒钨钛催化剂,研究了氯化钾对其氨法选择性催化还原(NH3-SCR)活性的失活效应。利用感应耦合等离子体、N2吸附、拉曼光谱、H2程序升温还原、NH3吸附红外光谱和NH3氧化活性等手段对新鲜和中毒催化剂的性质进行了表征,特别探讨了V2O5和WO3对催化剂抗碱中毒能力的贡献。
　　催化剂活性测试结果表明, V2O5含量越高,活性温度窗口越宽,而且含有WO3的三元催化剂活性高于V2O5/TiO2二元催化剂。催化剂的BET比表面积和孔结构取决于TiO2载体,随活性组分配比变化不大,说明催化剂物理结构性质并非影响活性的主要因素。原位红外光谱及H2程序升温还原测试结果表明,随V2O5含量提高,催化剂表面Br?nsted酸性位数量及氧化还原能力提高。作为反应的主要活性物种, V2O5在碱中毒处理后变成惰性的偏钒酸钾KVO3,使催化剂中Br?nsted酸性位减少,热稳定性下降,并削弱了催化剂的氧化还原能力,因此低钒含量的催化剂容易严重中毒失活。在高钒负载量(3%)时,部分V2O5在碱中毒后得以保留,从而使催化剂保持了一定的脱硝催化活性。
　　另外, WO3能给催化剂表面提供热稳定的酸性位,虽然WO3自身的氧化还原能力差,但其能改善V2O5的分散性,从而提高V2O5-WO3/TiO2催化剂的活性。除此之外, WO3在催化剂碱中毒过程中还能扮演牺牲剂,与钾反应生成钨酸钾(K2WO4),即在V2O5与钾离子结合形成KVO3的同时,部分WO3也会与钾反应形成K2WO4,可以使三元催化剂保留更多的活性V物种。因此,在所研究的催化剂中,高钒负载量的V2O5-WO3/TiO2催化剂表现出最好的抗碱中毒能力。
　　活性影响因素分析表明,对于新鲜催化剂,其表面吸附的NH3量足够多,催化剂活性与表面酸性相关度不大,脱硝效率主要取决于催化剂的氧化还原能力。但是,对于碱中毒处理后的催化剂,其表面吸附NH3的能力大大削弱,这时脱硝效率除了受催化剂氧化还原能力影响,在很大程度上也依赖于催化剂的表面酸性。     

异相成核和拉伸诱导对生物基PHBV复合纤维结晶结构与力学性能的影响

采用熔融纺丝法制备了聚(3-羟基丁酸酯-co-3-羟基戊酸酯)(PHBV)/二硫化钨(WS_2)复合纤维.利用示差扫描量热仪(DSC)、热台偏光显微镜、二维广角射线衍射仪(2D-WXRD)、纤维强力仪研究了WS_2异相成核作用和牵伸诱导作用对纤维的结晶结构和力学性能的影响.研究表明,WS_2显著提高了PHBV的结晶温度,当使用2 wt%WS_2时,复合材料的结晶温度提高到115~130oC,比纯PHBV(99~105oC)提高了约25oC.WS_2不仅没有影响PHBV球晶的径向生长速率,且明显提高了PHBV/WS_2复合材料的晶核密度,熔体成核活性Φ由1.0降低为0.49.随着牵伸倍率和WS_2用量的增加,纤维的拉伸强度呈现出先增加后减小的趋势.当添加1 wt%WS_2并采用单向牵伸3.8倍时,纤维中的晶体取向产生了β晶结构,使复合纤维的拉伸强度由纯PHBV的37 MPa提高至155 MPa,断裂伸长率由2.4%增加至45%.     

Kinetic study on photochromism of WO3 aqueous sol and its enhancement accompanying spectral changes by the addition of TiO2 aqueous sol

Photochromism of a WO₃ aqueous sol has been investigated in a nitrogen atmosphere under controlled temperature. Effects of ageing of the WO₃ sols, concentrations of WO₃ sols or Cl⁻ ion and temperature on the coloring rate were examined. The coloring rate was the first-order with respect of the WO₃ concentration. The coloring process was accelerated by an addition of TiO₂ aqueous sols. Spectral changes were measured using the mixing sol with various molar ratios (γ) of WO₃ and TiO₂. The absorption spectra changed from those having the single peak at 775 nm to those with two peaks at 640 and 980 nm. Such spectral transformation was ascribed to the structural change of the WO₃ nanoclusters, depending on the γ value and the concentration of Cl⁻ ion.     

Synthesis of polyethylene glycol (PEG) assisted tungsten oxide (WO3) nanoparticles for L-dopa bio-sensing applications

Nanocrystalline tungsten oxides (WO_3−δ) are currently receiving a lot of attention because of their interesting electrical, magnetic, optical and mechanical properties. In this report, we present the synthesis of PEG assisted tungsten oxide (WO₃) nanoparticles by simple household microwave irradiation (2.45 GHz) method. The samples were characterized using powder X-ray diffraction (XRD), thermal analysis (TG/DTA), transmission electron microscopy (TEM), UV-visible diffusion reflectance spectroscopy (UV-VIS-DRS), cyclic voltammetry and electrochemical impedance spectroscopy. Powder XRD results revealed that both the samples prepared with and without surfactant crystallize in the orthorhombic structure corresponding to WO₃·H₂O phase. Subsequent annealing under identical conditions (600 °C/air/6 h) led to significantly different products i.e. monoclinic W₁₇O₄₇ from surfactant free sample and orthorhombic WO₃ from PEG assisted sample. Blue emission was observed through UV-VIS-DRS with blue shift and the band gap energy was estimated as 2.7 and 3.28 eV for PEG assisted as prepared (WO₃·H₂O) and annealed samples (WO₃) respectively. Electrochemical measurements have been performed on all the samples deposited on the surface of glassy carbon (GC) electrode which showed high sensitivity and good selectivity for PEG assisted sample (WO₃·H₂O) for the direct detection of l-dopa.     

横向和纵向加热涂钨平台石墨炉原子吸收光谱法测定镓的比较

分别优化了横向加热和纵向加热涂钨平台石墨炉原子吸收光谱法测定镓的条件。结果显示,纵向加热方式的原子化温度比横向加热低,在灰化温度、进样量、酸介质的影响和化学改进剂等方面,两者没有显著差别。纵向加热的灵敏度高于横向加热,线性范围也比横向加热宽;但是采用横向加热方式能获得更低的检出限和更强的抗干扰能力。     

Kinetic Approach to the Interpretation of Analyte Losses During the Preatomization Thermal Treatment in Electrothermal Atomization Atomic Absorption Spectrometry

A method for evaluating E_a(loss), the apparent activation energy of the analyte loss process during the high-temperature thermal pretreatment stage in electrothermal atomization atomic absorption spectrometry (ETA-AAS) has been developed. The method is based on extracting information from the declining portion of thermal pretreatment curves (in this case presented as absorbance vs pyrolysis time at various fixed temperatures). Five volatile analytes (As, Pb, Sb, Se, and Sn) have been studied in the presence of tungsten chemical modifier (20 μg of W in H₂O₂).

The data on E_a (loss) have been utilized together with those obtained from treating the atomization peaks E_a and with literature data on known values of bond energies and enthalpies of certain chemical reactions. Possible mechanisms of analyte losses and atomization are discussed.