Binary Metal Oxide Adsorbed Graphene Modified Glassy Carbon Electrode for Detection of Riboflavin

Tungsten oxide (W) decorated titanium oxide (T) adsorbed onto a graphene (Gr) and modified the glassy carbon electrode for the electrochemical quantification of riboflavin (RF) in edible food and pharmaceuticals. For comparison, nanocomposites are formed using graphene oxide (GO), reduced graphene oxide (rGO) and pure graphite (G) sheets to study the electrochemical activities towards riboflavin. The ternary WTGr modified GCE shows the highest electrocatalytic activity due to synergetic interactions between the metal oxide and graphene. The electrochemical observations are supported by the SEM, HRTEM, XRD, UV-Vis, Zeta potential (ζ) and size data. The sensor shows a wide linear range 20 nM–2.5 μM with a detection limit 25.24 nM and sensitivity (4.249×10⁻⁸ A/nM). The fabricated sensor is validated in real samples.     

可控表面磷原子修饰提升超细W2C纳米颗粒电解水析氢反应性能

研究高活性和稳定性的非贵金属基析氢催化剂对解决当前能源危机和环境污染问题具有重要意义.碳化钨具有与贵金属Pt类似的d带电子结构,因而成为一类新兴的非贵金属析氢催化剂,受到广泛关注.磷掺杂是提高催化剂析氢活性的有效方法之一,然而目前最常见的构筑磷掺杂方法是使用多金属氧酸盐(POMs,如H3PW12O40),其固定的W/P原子比导致W2C中的掺杂浓度难以调控,并且磷掺杂主要是进入碳载体而不是碳化物本身,从而导致无法明确杂原子对其电催化析氢活性的贡献.本文采用植酸(PA)为磷源设计合成了可控磷掺杂W2C纳米颗粒,并探讨了催化剂组分、杂原子掺杂位置与析氢性能之间的关系.深入研究了磷掺杂碳化钨(WCP)的化学结构和析氢活性.与原始的W2C催化剂相比,WCP具有更高的本征活性、更快的电子转移速率和更多的活性位数量,并且在酸性和碱性条件下均表现出较好的析氢性能.特别是过电位为-200 mV时,WCP催化剂的本征活性在酸性和碱性条件下分别为0.07和0.56 H2 s-1,高出纯W2C(0.01和0.05 H2 S-1)数倍.同时,在电流密度为-10 mA cm-2时,优化后的WCP催化剂在酸性和碱性条件下的析氢过电位分别降低了96和88 mV.XPS及EDS元素分析结果表明,随磷源添加量增加,磷掺杂从碳化钨表面逐渐向内部扩散,进一步说明磷取代位置与析氢活性之间的构效关系,高浓度的表面磷取代可以加速质子捕获过程,从而显著提高其析氢活性,而过量的内部磷取代会破坏W2C结构,降低电子转移速率,从而导致析氢性能下降.利用密度泛函理论计算深入研究了WCP具有较好析氢性能的原因,与内部磷取代相比,表面磷取代会使碳化钨表现出更合适的氢吸附自由能,并且更加有效地降低了氢释放势垒,从而优化了析氢反应动力学.综上,本文为元素掺杂工艺提供了新的思路,同时研究了表面异质原子对析氢活性的关键作用,为该类催化材料的构效关系研究提供了新思路.     

Compared catalytic properties of OMS-2-based nanocomposites for the degradation of organic pollutants

In this study,Mn catalysts have been designed based on manganese oxide octahedral molecular sieve(OMS-2) supports to optimize the catalytic activity in the degradation of organic pollutants.Herein,two different synthetic strategies:Pre-incorporation vs.wet-impregnation have been employed to synthesize[PW]-OMS-2 and [PW]/OMS-2.For [PW]-OMS-2,energy dispersive X-ray spectroscopy(EDX) confirmed that dispersed granular phosphotungstic acid attached and located at the surface of OMS-2,meanwhile some W atoms have been doped into frameworks of OMS-2.However,for [PW]/OMS-2,the W atoms cannot enter the OMS-2 frameworks.A correlation has been established between the different synthetic strategies and catalytic activities.The [PW]-OMS-2 is the most highly effective and stable over than[PW]/OMS-2 and OMS-2 itself for the organic pollutants removal.This may be caused not only by the synergetic effect of [PW] and OMS-2,but also by doping W into frameworks of OMS-2.Therefore,this work provides a new environmentally-friendly and heterogeneous PMS activator and it may be put into practice to degrade organic pollutants.     

Instantaneous work hardening behaviour of two-phase tungsten heavy alloys: a phenomenological approach

ABSTRACT

The present work describes a phenomenological approach to explain the instantaneous behaviour of tungsten heavy alloys (WHAs) in heat-treated and swaged conditions. The strengths and elongation values of heat-treated materials are lower and higher than those of the swaged samples respectively. The heat-treated materials exhibit two slopes in true stress–true plastic strain curves and follow the Ludwigson constitutive equation. On the other hand, swaged materials display a single slope and adhere to typical Swift constitutive equation. The latter reflect the presence of pre-strain in the materials due to swaging deformation. The fracture surfaces in heat-treated materials consist of W-W decohesion along with matrix rupture and W-cleavage, while swaged samples consist of mainly W-cleavage. Both the materials display three typical stages (I, II and III) of work hardening. The second derivatives of true stress–true plastic strain curves of these alloys exhibit a perfect parabola although the nature of true stress–true strain as well as true stress–true plastic strain curves is quite different in heat-treated and swaged materials. This has been observed for the first time in WHAs consisting of matrix and W-grains. The shape of the parabola is simple and easy to fit. The fitting parameters of parabolas have been successfully employed to explain the flow behaviour of a large number of tungsten heavy alloys having two-phase microstructure in different processing conditions.     

正火和回火处理过程中W/Fe/RAFM钢接头W/Fe界面组织和剪切性能的演化

对热等静压(HIP)扩散焊制备的W/Fe/RAFM钢接头进行了正火和回火处理,以恢复其中RAFM钢的组织和性能.采用电子探针微分析器(EPMA)和掠入射X射线衍射(GIXRD)对W/Fe界面组织的演化进行了分析,采用剪切测试和扫描电镜(SEM)对接头连接性能的演化进行了测试和分析.结果表明,正火处理后,RAFM钢中的C...     

Synthesis, Structure and Secondorder Nonlinear Optical Activities of a New Tungsten（0） Compound with Pyridine-2-thiolato Ligand, [Et4N][W（pyS）（CO）4] （pys = C5H4NS^-）

The reaction of W(CO)6 with pyOSNa (C5-H4NOSNa) and Et4NCl in MeCN affords a new tungsten(0) complex [Et4N][W(pyS)(CO)4] 1 (Mr.= 536.29).The crystal and molecular structures have been determined by X-ray single-crystal diffraction.Complex 1 crystallizes in the orthorhombic system,space group P212121 with a = 8.2429(5),b = 9.1045(4),c =26.8851(14) (A),β = 90.00°,V= 2017.66(18) (A)3,Z = 4,Dc.= 1.765 g/cm3,μ = 58.51 cm-1,F(000) =1048,the final R = 0.0204 and wR = 0.0400 for 4432 observed reflections with I ＞ 2σ(I).X-ray structure analysis revealed that the molecule is acentric and has large first-order hyperpolarizability (7.2 × 10-30 esu),so it could be an IR second-order nonlinear optical candidate material.     

催化反应—导数示波极谱法测定痕量钨

在盐酸介质中，痕量钨对钛（Ⅲ）还原金莲花橙的缓慢反应有强烈催化作用，在ＮａＯＨ介质莲花橙Ｏ于－０．５０Ｖｖｓ．ＳＣＥ产生一灵敏的导数示波极谱波。据此，建立了一定检测限和测定范围分别为０．８ｎｇ／ｍＬ和１．６－８０ｍｇ／ｍＬＷ的催化反应－示波极谱新方法，用于钢和矿样中钨的测定，获得满意结果。     

Hollow fiber supported liquid membrane extraction for ultrasensitive determination of trace lead by portable tungsten coil electrothermal atomic absorption spectrometry

Hollow fiber supported liquid membrane extraction (HF-SLME) was used to separate and enrich trace lead from a large volume of 250 mL water sample to a final tiny volume of 30 μL of 1-octanol, 5 μL of which was inject into a tungsten coil electrothermal atomic absorption spectrometer (W-coil ET-AAS) for determination of lead. Some important parameters that influenced the extraction and determination were investigated in detail, such as the concentration of ammonium pyrrolidine dithiocarbamate (APDC), pH of sample solution, stirring rate, extraction time, pyrolysis current, atomization current, carrier gas flow rate, as well as interferences. Under the optimized conditions, a practical enrichment factor of 499 and a limit of detection (3σ) of 0.2 ng mL^{− 1} were obtained. The calibration curve was linear in the range of 0.5–10 ng mL^{− 1}. The relative standard deviation (RSD) was 5.6% for five measurements of a 4 ng mL^{− 1} lead standard solution. The accuracy of this method was examined by the analysis of certified reference water samples (GBW(E)080398 and GSBZ(E) 50009-88) for lead. Finally, the proposed method was applied to the determination of lead in local tap water, pond water and river water, with recoveries in the range of 96–109% for spiked samples.     

不同载体对负载型氧化钨催化剂在己二酸合成反应中的结构及性能影响

以SBA-15、六角介孔二氧化硅（HMS）和SnO₂为载体,通过浸渍法合成了含钨负载型催化剂,并考察了三种催化剂在环氧环己烷选择氧化制备己二酸反应中的催化性能. 通过X射线衍射（XRD）,透射电镜/场发射透射电镜（TEM/FETEM）,紫外-可见漫反射光谱（UV-Vis DRS）,拉曼（Raman）光谱,X射线光电子能谱（XPS）以及傅里叶变换红外（FTIR）光谱等手段对各种催化剂的结构进行表征. 结果表明,载体与催化剂的性能有密切的关系. 以SnO₂为载体的WO₃/SnO₂催化剂活性最高,其次是WO₃/HMS催化剂,WO₃/SBA-15 催化剂的活性最差.XRD 分析显示WO₃/SnO₂催化剂中氧化钨物种的晶化程度最低,TEM 和XPS 结果表明氧化钨物种在WO₃/SnO₂催化剂表面高度分散并且粒径尺寸很小（约2 nm）,UV-Vis DRS结果表明在WO₃/SnO₂催化剂中存在孤立[WO₄]四面体和低聚态的钨物种,这些物种的存在可能是WO₃/SnO₂催化剂具有高活性的主要原因. 此外,WO₃/SnO₂催化剂可以重复使用多次,6 次反应后己二酸（AA）得率仍然保持在80%以上,说明氧化钨物种与SnO₂载体间存在强烈的相互作用,从而提高了催化剂的稳定性.     

石墨烯-氧化钨复合薄膜的制备及界面电子传输特性

以偏钨酸铵为钨源、聚乙烯吡咯烷酮为连接剂,采用浸渍提拉法制备了石墨烯-氧化钨复合薄膜,利用X射线衍射（XRD）、扫描电镜（SEM）、透射电镜（TEM）及Raman光谱等方法对复合结构材料进行了表征,并利用光电流测试、交流阻抗谱（EIS）、瞬态光电流谱和强度调制光电流谱等方法,研究复合薄膜电极在光电作用下界面上的载流子转移过程和电荷传输行为. 结果表明,组成薄膜的氧化钨纳米颗粒与石墨烯充分复合,光电性能显著提高;与石墨烯复合后,薄膜的瞬态时间常数增大,电子-空穴对寿命延长;电子传输时间减少,为纯氧化钨薄膜的47.5%.