Remote helicopter-borne detector for searching of methane leaks

Measurements of the content of various molecular impurities in the ambient air using helicopter- and aircraft-borne systems represent an extremely urgent challenge. In this respect, of special interest are the devices that that provide leakage monitoring in gas lines in order to prevent emergencies. In the paper results of the tunable diode laser-based instrument development and testing are presented.     

Cesium lead halide perovskite nanocrystals for ultraviolet and blue light blocking

Using cesium lead halide perovskite nanocrystals, CsPb(Cl/Br)_3, as a light absorber, we report a highly effective UV and blue light blocking film. The CsPb(Cl/Br)_3 nanocrystals are well dispersed in the ethyl cellulose(EC) matrix to compose a UV and blue light shielding film, and the absorption edge of the film is tunable by adjusting Cl to Br ratio using anion exchange. The CsPbCl_2 Br-EC film exhibits a transmittance of 5% at 459 nm, 90% at 478 nm and 95% in the range of 500–800 nm, which makes it excellent for UV and blue light shielding. In addition, the as-prepared EC-CsPb(Cl/Br)_3 film shows excellent photostability under UV irradiation. Results demonstrate that this EC-CsPb(Cl/Br)_3 based materials with sharp absorbance edges, tunable blocking wavelength, and high photostability can be useful for the applications in UV and blue light blocking and optical filters     

An integrated plastic microchip for enhancing electrophoretic separation using tunable pressure-driven backflows

Microfluidic CE (MCE) is an effective solution for rapid and sensitive determination of multiple analytes. Herein, a dynamic coated cyclic olefin copolymer microchip was developed having an on-chip micropump for fluid velocity adjusting in electrophoretic separations. This micropump was fabricated by constructing a polyacrylamide gel membrane at one channel terminal. Once applying electric field across the membrane, a pressure-driven flow generated automatically to balance the electroosmotic flow (EOF) mismatch at the channel-membrane interface. The influence of gel precursor concentration and operating voltages on the fluid velocity was carefully evaluated. Moreover, the highly integration of injection, separation, and pumping units of the MCE system minimized the dead volume and provides satisfied column efficiency. Experiments showed that by adjusting of pumping voltage reduced the fluid velocity by a factor of 6, resulting six- and threefold resolving power enhancements of rhodamine dye mixture and amino acid mixture, respectively. Furthermore, the developed MCE method was applied for rhodamines and amino acids quantitation in food and cosmetics, with standard addition recoveries of 87.3–106.9% and 89.9–117.4%, respectively. These results were also confirmed by standard HPLC method, revealing the application potential in fast and onsite analysis of complex samples.     

超浸润形状记忆海绵的制备及油-水分离性能

基于反式 1,4-聚异戊二烯(TPI)的形状记忆性能, 以聚氨酯海绵为基底, 包覆TPI制备出了一种具有疏水超亲油特性的三维多孔形状记忆海绵. 由于这种海绵具有良好的形状记忆特性, 可以通过反复按压/恢复过程, 实现对海绵孔径在微米尺寸(约875 μm)与纳米尺寸(约450 nm)间可逆调控. 利用材料特殊的浸润特征及其可控的孔尺寸, 进一步研究了其在油-水分离中的应用. 研究结果表明, 微米尺寸大孔径海绵有利于对不相溶油-水混合物进行快速高效分离, 而纳米尺寸小孔径海绵则有利于对乳液混合物进行分离, 实现了同一材料同时满足不相溶油-水混合物及乳液体系的分离要求.     

Tunable Synthesis of Monofluoroalkenes and Gem-Difluoroalkenes via Solvent-Controlled Rhodium-Catalyzed Arylation of 1-Bromo-2,2-difluoroethylene

Divergent synthesis of fluorine-containing scaffolds starting from a suite of raw materials is an intriguing topic. Herein, we report the solvent-controlled rhodium-catalyzed tunable arylation of 1-bromo-2,2-difluoroethylene. The selection of the reaction solvents provides switchable defluorinated or debrominated arylation from readily available feedstock resources (both arylboronic acids/esters and 1-bromo-2,2-difluoroethylene are commercially available). This switch is feasible because of the difference in coordination ability between the solvent (CH₂Cl₂ or CH₃CN) and the rhodium center, resulting in different olefin insertion. This protocol allows the convenient synthesis of monofluoroalkenes and gem-difluoroalkenes, both of which are important scaffolds in the fields of medicine and materials. Moreover, this newly developed solvent-regulated reaction system can be applied to the site-selective dechlorinated arylation of trichloroethylene. Overall, this study provides a useful strategy for the divergent synthesis of fluorine-containing scaffolds and provides insight into the importance of solvent selection in catalytic reactions.     

Diode-laser measurements and calculations of H2-broadening coefficients in the ν3 band of CH3D

Using a tunable diode-laser spectrometer, we have measured at room temperature the H₂-broadening coefficients of for 36 lines belonging to QP and QR branches in the ν₃ parallel band. The recorded lines with J values ranging from 1 to 15 and K from 0 to 9 (K?J) are located between 1196 and 1412 cm⁻¹. The H₂-broadening coefficients were determined by fitting each spectral line with Voigt, Rautian, and Galatry profiles. They were also calculated on the basis of a semiclassical model of interacting linear molecules performed by considering in addition to the weak electrostatic contributions the atom-atom Lennard-Jones potential. The theoretical results are in reasonable agreement with the experimental data, except for high J transitions where they are overestimated and for K approaching or equal to J with J?3 where they are underestimated. The latter discrepancy may be caused by the assumption to consider only ΔK=0 collision-induced transitions, associated with |ΔJ| transitions up to 4.     

Design of thermo-optic tunable optical filter based on Si/Air DBR and polymer Fabry–Perot microcavity in SOI

An integrated tunable optical filter (TOF) based on thermo-optic effect in silicon on insulator (SOI) rib waveguide is designed and simulated. The device is comprised of two high refractivity contrast Si/Air stacks, functioning as high reflectivity of DBRs (distributed Bragg reflectors) and separating by a variable refractive index polymer Fabry–Perot (F–P) cavity. The designed device exhibits Q = 24077, FWHM = 0.065 nm and finesse = 566. Wavelength tuning is achieved through thermal modulation of refractive variation of the cavity. As the cavity polymer is heated, the refractive index of the cavity decreases. When the temperature of cavity polymer changes within 105, the central wavelength gets a continuous 35 nm shift from 1530 nm to 1565 nm, which can operate the whole C-band in the WDM (wavelength division multiplexing) networks. Moreover, by calculating, the tuning sensitivity is about 0.33 nm/°C. Owing to the compact size and excellent characteristics of integration, the proposed component has a promising utilization in spectroscopy and optical communication.     

基于TDLAS技术的CH4气体检测与温度补偿方法

CH₄气体的精准检测对防止矿井瓦斯爆炸,确保安全生产至关重要。目前基于可调谐半导体激光吸收光谱技术（TDLAS）存在因温度变化导致气体浓度测量误差较大。探究了基于TDLAS的CH₄气体检测系统与温度补偿方法,分析温度对CH₄气体吸收谱线的影响,通过算法补偿模型消除环境温度对CH₄气体检测的影响。依据TDLAS技术原理及相关理论,对系统发射单元、吸收池、信号接收单元、数据处理单元进行设计,搭建了基于TDLAS技术的CH₄气体浓度检测系统,实验检测了不同环境温度（10~50 ℃）时0.04%CH₄气体浓度,分析温度变化对CH₄气体在波长为1.653 μm处吸收谱线强度和半宽度的影响。为消除温度对CH₄气体检测的影响并提高补偿效果,采用粒子群优化算法（PSO）优化BP神经网络（BPNN）的最佳权值和阈值,建立CH₄气体的PSO-BP温度补偿模型,克服了BP神经网络收敛速度慢、易陷入局部最优的缺点。结果表明：（1）基于TDLAS的CH₄气体检测浓度随环境温度升高而下降,整个实验温度内相对误差范围为4.25%~12.13%,不同环境温度下CH₄气体检测浓度与温度之间的关系可用一元三次多项式表示;（2）CH₄气体的吸收强度和半宽度随着温度的升高而下降,与温度变化之间的关系为单调递减函数,温度对CH₄气体吸收谱线强度的相对变化率大于吸收谱线半宽度的相对变化率,CH₄气体吸收谱线的强度更容易受温度变化的影响;（3）BP神经网络和PSO-BP模型测试样本的绝对平均误差（MAE）分别为12.88%和1.81%,平均绝对百分比误差（MAPE）分别为2.3%和0.3%,均方根误差（RMSE）分别为15.96%和2.69%,相关系数R2分别为0.980 6和0.999 6。通过建立PSO-BP温度补偿模型,补偿效果大部分分布在±1.0%的误差范围内,MAE,MAPE,RMSE和R2等评价指标均大幅度提升,对提高TDLAS技术在矿井CH₄的精准检测具有一定的参考意义。     

基于CIC的数字正交锁相放大器的甲烷检测实验研究

针对甲烷在大气中背景气体成分复杂、检测难度大、稳定性差等问题,本文基于可调谐二极管激光吸收光谱技术和波长调制光谱技术,将积分梳状滤波器与有限脉冲响应滤波器相结合应用于数字正交锁相放大器,开展大气中甲烷气体的痕量检测实验研究.实验表明,与传统的数字正交锁相放大器相比较,改进的数字正交锁相放大器提取的二次谐波信号的信噪比从...     

基于TDLAS-bLS方法的夏玉米农田氨挥发研究

采用开放光程可调谐二极管激光吸收光谱技术和反向拉格朗日随机扩散模型,通过田间试验,开展基于高时间分辨率数据的农田氨挥发研究,旨在为揭示农田氨挥发的动态变化规律提供新技术新方法。结果表明,TDLAS-bLS法能有效监测农田氨挥发动态,尤其是日内变化规律。豫北平原潮土农田夏玉米追肥后日内氨挥发有两个挥发峰值,分别在9:00和14:00左右,第一个高峰是由于夜晚溶解在露水中的氨气随露水蒸发而再次挥发,第二个高峰受地温和光照影响所致。追肥后氨挥发速率迅速升高,但挥发高峰期持续时间较短,集中于前四天,整个监测期内氨挥发损失约25.3%。TDLAS-bLS法与通气法相比,测定结果有一定差异。