Synthesis and photonic band gap characterization of high quality photonic crystal heterostructures

High quality photonic crystal heterostructures with a thin titania planar defect layer between its two constitutional photonic crystals were fabricated and their structural and optical properties were analyzed. The results suggest that the thin planar defect layer is beneficial to separate the two constitutional photonic crystals from each other and to reduce the roughness of the interface. The quality of the resulting photonic crystal heterostructures is improved largely and the main features of the photonic band gaps of the two constitutional photonic crystals are inherited. The predominant optical quality of these heterostructures (e.g. deep double photonic band gaps and steep photonic band edges) may afford new flexibility and functionality for engineered photonic behavior in practical devices such as late-model light-operated switches.     

Complex-number asymmetry parameters of the optical Fano effect in ring resonators

We studied the sharp asymmetric Fano line shape in fiber ring resonator systems and provided an explicit expression for asymmetry parameters using the physical parameters of the system. The fiber ring system was controllable and reconfigurable, allowing us to produce a variety of Fano line shapes in different configurations. Experimentally observed asymmetric spectral structures were fully reproduced using the complex-number asymmetry parameters, validating the approximations used to reduce the analytical expression for the line shape to the phenomenological Fano formula. The results may be useful in the design of on-chip application systems.     

A simple technique for evaluation of transmission coefficient at the splice with angular offset and transverse offset for first higher mode propagation in graded index fibers

We present simple and accurate analytical expressions for transmission coefficient at the splice with angular offset and transverse offset in case of first higher mode propagation in graded index fibers. We employ the simple series expression for first higher order modal field for graded index fiber. The evaluation of the concerned parameters based on our formalism requires very little computations. Here, we show that our estimations match excellently well with the exact results in case of step and parabolic index fibers. Further, splice being highly tolerant for longitudinal separation, our analysis is judiciously restricted to the case of transverse and angular mismatches only. The analysis should find application in dual mode graded index fiber in all optical technology.     

含超导材料Thue-Morse序列一维光子晶体传输特性研究

超导光子晶体是一类重要的带隙可调谐的光子晶体.利用传输矩阵法研究了含超导材料的Thue -Morse序列准周期结构—维光子晶体在可见光波段的传输特性.数值结果表明在正入射时,光子带隙宽度和位置基本不随序列项数的增加而改变;准周期超导光子晶体的传输特性可以通过改变传统电介质材料的结构参数和环境温度等来进行调节.     

Influence of deposition temperature on the crystallinity of Al-doped ZnO thin films at glass substrates prepared by RF magnetron sputtering method

Al-doped ZnO (AZO) transparent conducting films were successfully prepared on glass substrates by RF magnetron sputtering method under different substrate temperatures. The microstructural, electrical and optical properties of AZO films were investigated in a wide temperature range from room temperature up to 350 °C by X-ray Diffraction (XRD), Field-Emission Scanning Electron Microscopy (FESEM), High-Resolution Transmission Electron Microscopy (HRTEM), Hall measurement, and UV–visible meter. The nature of AZO films is polycrystalline thin films with hexagonal wurtzite structure and a preferred orientation along c-axis. The crystallinity and surface morphologies of the films are strongly dependent on the growth temperature, which in turn exerts a great effect on microstructural, electrical and optical properties of the AZO films. The atomic arrangement of AZO film having an wurtzite structure was indeed identified by the HRTEM as well as the Selected Area Electron Diffraction (SAED). The defect density of AZO film was investigated by HRTEM. The film deposited at 100 °C exhibited the relatively well crystallinity and the lowest resistivity of 3.6 × 10⁻⁴ Ω cm. The average transmission of AZO films in the visible range is all over 85%. More importantly, the low-resistance and high-transmittance AZO film was also prepared at a low temperature of 100 °C.     

Simple expressions of the reflection and transmission coefficients of fundamental Lamb waves by a rectangular notch

The scattering of Lamb waves by a two-dimensional rectangular notch is investigated for rapid inspection of defects in a structure. To derive the reflection and transmission coefficients of the scattered waves in a simple way, the scattering caused by the notch is analyzed through the composition of individual scattering processes. Linear equations corresponding to the reflection and transmission coefficients are constructed along with scattering graphs. For an illustration of the efficacy of the presented method, the scattering of fundamental symmetric and anti-symmetric modes are inspected according to the depth and width of a notch in a plate. Validity of these expressions is demonstrated by the comparison of the theoretical analysis results with those from the finite element analysis.     

Tunable Fano resonances in the ballistic transmission and tunneling lifetime in a biased bilayer graphene nanostructure

Dynamics of the Dirac fermions, in particular the transmission coefficient and the resonant tunneling lifetime are studied across a bilayer graphene electrostatic double barrier structure modulated by an in plane homogeneous electric field. Asymmetric Fano type resonances are noted for the first time in the transmission spectrum of the bilayer graphene nanostructures and are found to be highly sensitive to the direction of incidence of the charge carriers and the applied homogeneous electric field. The effect of the external field on the extended and the evanescent modes is also analysed. Resonant tunneling lifetime is found to be highly anisotropic in nature. The chiral carriers are either accelerated or decelerated by the electric field depending on the energy of the quasi-bound states, the angle of incidence and the magnitude of the applied field. Effects of the external field on the localization of the chiral carriers are also discussed.     

Spectral analysis of eigenparameter dependent boundary value transmission problems

In this paper, the singular second order differential operators are considered defined on the multi-interval. Some boundary and transmission conditions are imposed on the maximal domain functions with the spectral parameter. After constructing the differential operators associated with the boundary value transmission problems on the suitable Hilbert spaces, it is proved that these operators are the maximal dissipative operators. Finally constructing the model operators which are established with the help of the scattering functions, it is proved that all root vectors of the maximal dissipative operators are complete in the Hilbert spaces.     

NIST transmission density instrument

The Optical Technology Division of NIST has developed a new instrument for measuring ISO standard visual diffuse transmission densities using the diffuse influx mode. This instrument is used to calibrate both X-ray and photographic film step tablet Standard Reference Materials. The design, characterization, and operation of the instrument are detailed. The instrument was fully characterized both to verify compliance with the applicable international standards and to determine the combined uncertainty in transmission density associated with the calibrations. Results from comparisons with other laboratories are also presented.     

特异材料吸收体的透射线模型与场分析:理想的电磁波浓缩器(英文)

Arising from the proposed Transmission Line(TL) model for ERR and wire structure, a TL model for a metamaterial absorber is proposed. The S-parameters obtained by this TL model demonstrate the same shapes as the simulation. An investigation of the TL model and average absorption power densities shows that the metamaterial absorber does not simply convert the electromagnetic wave into thermal energy, but concentrate the electromagnetic wave into a small space where it is finally absorbed. This suggests that ...