聚甲基丙烯酸甲酯单分子膜的原子力学显微镜研究

报道了利用原子力显微镜（ＡＦＭ）技术对聚甲基丙烯酸甲酯（ＰＭＭＡ）单分子膜进行分子结构水平的观察研究．由ＡＰＭ图像中得到的ＰＭＭＡ单体所占面积与用π－Ａ曲线中换算出液面上ＰＭＭＡＬａｕｇｍｕｉｒ膜中单体的面积符合得很好．从ＡＦＭ图像中可见ＰＭＭＡＬＢ膜中ＰＭＭＡ的线型碳链是与档板（ｂａｒｒｉｅｒ）平行的紧密排列，与ＬＢ提膜方向相垂直．并由此对ＰＭＭＡＬＢ膜的形成过程进行分析．此外，还观察到了在Ｓｉ基底上ＰＭＭＡ直链的卷绕伸直排列形态，初步分析了其形成原因．     

2－氰基－4－硝基苯胺的薄层色谱紫外光度分析

本文应用薄层色谱紫外光度法，测定了产品中的主要成分２－氰基－４－硝基苯胺和杂质，得到了满意的分析结果。与经典化学法比较，这种方法具有简单、快速、精确的特点。回收率９９％～１０１％，相对标准偏差０．７％～１．１％，２－氰基－４－硝基苯胺含量在０～１３５μｇ／２５ｍＬ范围内遵守比耳定律。     

Photolithographic Patterning and Doping of Silica Xerogel Films

This study shows that conventional photolithography can be applied for patterning native or organic dye-doped silica films (0.5 m thick) obtained via a base-catalyzed sol-gel process. Photoresist was spin-coated onto high optical quality xerogel films, soft-baked, exposed to UV irradiation through a photomask, and developed with a commercial photoresist developing solution. Etching away of the photoresist-unprotected areas of the silica films was carried out with a dilute HF solution, while the remaining unexposed photoresist was removed with acetone. Interdigitated array patterns with features as small as 0.5 mm show a smooth surface and extremely sharp interfaces. Densification of the films at 550°C for 2 h decreases the film thickness by 11%, increases the refractive index from 1.420 to 1.456, and allows for well-defined patterning down to length scales of 10 m. Since the densification conditions are incompatible with organic dopants, it is demonstrated that sol-gel films can be doped after pattering (post-doping) by adsorption of cationic dyes from solution. Scanning electron microscopy reveals that the microstructure of patterned sol-gel films is similar to that of bulk monoliths, indicating that the photolithographic procedure is not harmful to the film quality. All patterned films demonstrate highly regular light diffraction patterns.     

STRUCTRE AND PROPERTIES OF COMPOSITE Ni/HARD CARBON FILMS PREPARED BY PLASMA DEPOSITION

IntroductionHardcarbonfilmsprcparcdb}'vari0usplasmaprocesscsareofc0nsidcrablcinterestbccauscofthcirunusualmcchanical-opticalandelcctricalpropertiesll~3l.Rccently,ithasReceive(IJl111c5,l9`)5;,.`,1iis()tI1ie)\tioII,1'ceil'edJtl1)'l4,l995*'I11isprojectiss[1pportcdh}tl1cNatiol1a1Nat[lntlScicl1ccI`()ul1dati()l1ofCl1il1aal1dtl1eI,aboraton'ofSolidI,ubricati()l1,l.al1/l10ulnstitutcofCl1cn1icalPh\'sics,111cChincscAcadcl11\'ofScicnccs.benfoundthattheinc0rporati0nofmetaIintocarbonfilmscangrcatl}'…     

Photoelectrochemical behavior of coupled SnO2|CdSe nanocrystalline semiconductor films

A photoelectrochemical cell with a coupled SnO₂|CdSe nanocrystalline semiconductor electrode has been prepared by sequential deposition of SnO₂ and CdSe films onto an optically transparent electrode (OTE), and its photoelectrochemical behavior has been studied. The results show that the coupling of CdSe with SnO₂ leads to an improvement in the performance of OTE|SnO₂|CdSe over OTE|CdSe cells in terms of increased incident photon-to-current conversion efficiency, increased stability and smaller reversal of current. The favorable positioning of the energy bands of SnO₂ and CdSe is responsible for the above observations. Various photoelectrochemical parameters of the OTE|SnO₂|CdSe cell obtained for an incident light power of 0.31 mW cm⁻² at 470nm, are as follows: I_sc ≈ 25–30 μA cm⁻², V_oc ≈ 0.5–0.6 V, ƒƒ = 0.47 and a power conversion efficiency of about 2.25%.     

The Reactivity of Cr‐Te Superlattice Reactants and of Co‐deposited Cr‐Te Films: Studies with in‐situ X‐ray Diffractometry

The reactivity of a Cr‐Te multilayer film consisting of 326 Cr/Te double‐layers with about 88(3) at% Te was investigated with in‐situ X‐ray diffraction. The occurrence of a superstructure reflection caused by the multilayer system is observed. During the annealing procedure between 80 and 90 °C the layer‐by‐layer arrangement is destroyed and elemental Te crystallizes. After 6 h isothermal annealing at 140 °C CrTe₃ starts to crystallize. The amount and the crystal size of CrTe₃ increase with raising temperature and Te is consumed during the growth process. At 220 °C the formation of crystalline Cr₂Te₃ is observed and between 220 and 260 °C CrTe₃ is completely decomposed into Cr₂Te₃. The two Cr tellurides grow as highly textured materials. The size of CrTe₃ crystals is significantly larger than that of Cr₂Te₃. For a co‐deposited Cr‐Te film with composition 77(3) at% Te the tri‐telluride and elemental Te crystallize simultaneously. The texture of CrTe₃ is less pronounced and different reflections of the tri‐telluride occur besides the (h00)‐reflections. Up to 160 °C a pronounced increase of the crystallite size is observed and the crystals are significantly larger than those obtained with the multifilm sample. At 130 °C the crystallization kinetics seem to be controlled by nucleation.     

Classification of white wine aromas with an electronic nose

This paper reports the use of a tin dioxide multisensor array based electronic nose for recognition of 29 typical aromas in white wine. Headspace technique has been used to extract aroma of the wine. Multivariate analysis, including principal component analysis (PCA) as well as probabilistic neural networks (PNNs), has been used to identify the main aroma added to the wine. The results showed that in spite of the strong influence of ethanol and other majority compounds of wine, the system could discriminate correctly the aromatic compounds added to the wine with a minimum accuracy of 97.2%.     

Sulfide Gels and Films: Products of Non-Oxide Gelation

The preparation of concentrated sols and transparent stiff gels of II-VI semiconductors nanocrystals is reported. A two-step process for the production of cadmium sulfide is reported. Sol stabilization and gelation control are achieved through successive passivation and depassivation of the surface of the nanocrystals which are complexed with thiols. The mechanisms driving the aggregation and the gelation are explained on the basis of NMR and SAXS experiments. Thin films as well as monoliths can be produced. The general principles of the method presented are not restricted to chalcogenide systems and thus enlarge the domain of application of the inorganic sol-gel process.     

二维光学薄膜的气敏反射光谱特性

研究二维光学薄膜ＳｎＯ２：ＴｉＯ２在乙醇、丙酮、氨蒸汽中的气敏反射光谱，发现它与厚膜（膜厚２０μｍ）的气敏反射光谱有明显的差异，它的反射光强在气体浓度较低时随气体浓度增加而增强，气体浓度较高时则现象相反，并且它的反射峰会发生位移。利用不同气体的反射峰的气敏特性，可制成有气体选择性的气敏光纤传感器。     

Electric conductivity in a fibrous porous medium with thin but polarized double layers

The electric conduction in the fibrous medium constructed by a homogeneous array of parallel, identical, charged, circular cylinders having an arbitrary zeta potential filled with the solution of a symmetrically charged electrolyte is analytically examined. The thickness of the electric double layers surrounding the dielectric cylinders is assumed to be small relative to the radius of each cylinder and to the gap width between two neighboring cylinders, but the polarization of the mobile ions in the diffuse layers is allowed. The effect of interactions among individual cylinders is taken into explicit account by employing a unit cell model. The appropriate equations of conservation of electrochemical potential energies of ionic species are solved for each cell, in which a cylinder is envisaged to be surrounded by a coaxial cylindrical shell of the fluid solution. Analytical expressions for the effective electric conductivity are obtained in closed forms as functions of the porosity of the fiber matrix and other characteristics of the porous system. Comparisons of the results of the cell model with different conditions at the outer boundary of the cell are made. Under an otherwise identical condition, the electric conductivity in a porous medium composed of an array of parallel cylinders in the transverse direction is smaller than that of a suspension of spheres. The effect of interactions among the cylinders or spheres on the effective conductivity can be quite significant under appropriate conditions.