XPS and AES characterization of hydrolysed γ‐mercaptopropyltrimethoxysilane deposited on Al,Zn and Al–43.4Zn–1.6Si alloy‐coated steel

In this paper Al, Zn and Al–43.4Zn–1.6Si (AlZn) alloy‐coated steel have been treated with the organofunctional silane γ‐mercaptopropyltrimethoxysilane (γ‐MPS). The influence of different metal substrates on the structure and composition of the silane films was investigated with XPS and AES. The films were obtained by dipping the substrates in the silane solution followed by a blow‐dry procedure in nitrogen gas. The results show that the surface concentration of the deposited silane is independent of the metal substrate and that the thickness of the silane film is non‐uniform. The AES measurements indicate that the silane film covers the entire substrate surface and XPS analysis of the silane‐treated substrate surfaces at different take‐off angles indicates that the γ‐MPS molecule is randomly orientated. Also, the results show that the silane is well hydrolysed under the solution conditions used. Finally, in the zinc‐containing silane‐metal systems, i.e. the silane‐treated AlZn and Zn substrates, the results indicate that the γ‐MPS molecules can bond to the substrate surfaces via the thiol group of the molecule. Copyright © 2004 John Wiley & Sons, Ltd.     

Thermally reversible light scattering films based on the melting/crystallization of organic crystals dispersed in an epoxy matrix

Films that can be reversibly switched from opaque to transparent states by varying temperature (TRLS films), have potential applications in thermal sensors, optical devices, recording media, etc. A dispersion of organic crystals in a thermoset may be used for these purposes provided that at temperatures higher than the melting point there is a matching of refractive indices of both phases. A model system consisting on a dispersion of diphenyl (DP) crystals in an epoxy matrix based on diglycidyl ether of bisphenol A and m-xylylenediamine, was analyzed as a possible TRLS film encapsulated between transparent covers to avoid sublimation of DP. To obtain a uniform dispersion of DP-rich domains in the epoxy matrix by polymerization-induced phase separation, it was necessary to add 5 wt% of polystyrene (PS) to the initial formulation. Phase separation induced by polymerization at 80 °C led to a dispersion of PS/DP domains in the epoxy matrix due to the low compatibility of PS with the epoxy and its high compatibility with DP. Crystallization and melting processes were confined to the interior of dispersed domains leading to an excellent reproducibility of the optical properties of TRLS films in the course of successive heating-cooling cycles.     

Sol-Gel Processing of PbZrO3 Thin Films

PbZrO₃ (PZ) thin films have been prepared by 2-methoxyethanol route from lead oxide or lead acetate and zirconium n-butoxide. The use of lead oxide as lead source and the seeding layer of TiO₂ on Pt/TiO₂/SiO₂/Si substrate facilitate the formation of the perovskite phase.     

Pore size distributions in low‐k dielectric thin films from X‐ray porosimetry

X‐ray reflectivity has been used to determine the mass uptake of probe molecules in porous thin films supported on thick silicon wafers. The adsorption occurs by capillary condensation when the films are exposed to probe vapor at controlled partial vapor pressures. The probe solvent partial pressure was varied by mixing saturated air and dry air at constant temperature or by changing sample temperature at a constant vapor concentration. Pore size distribution in the films can be calculated from the probe uptake with typical porosimetric approaches such as the application of the Kelvin equation to convert partial pressure into pore size. For illustration, the pore size distribution of three different nanoporous thin films, the primary candidate of ultra‐low‐k interlevel dielectrics in the next generation of integrated circuit chips, was determined with this technique. These samples represent different generations of low‐k dielectrics developed by industry. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2170–2177, 2002     

Irreversible and reversible phase transitions of alkyl monolayers. Gas chromatographic evidence of polar solvent influence on the adsorbing properties of the layer

Summary Further to Gilpin's observations in liquid chromatography of the irreversible transformation of alkyl grafts, following the replacement of an organic mobile phase by an aqueous one, we describe some gas chromatographic experiments which lead to similar (log V_s, I/T) plots, as a consequence of the same solvent release process.We use paraffin films on siliceous supports or hydroxylated liquid substrates or C₂₂-alkyl bonded silica. These experiments demonstrate that this irreversible transition and the melting-like reversible transition are completely different phenomena. They confirm the existence of at least three kinds of monomeric alkyl films.     

Magnetism of metal cyanide networks assembled at interfaces

Studies of metal cyanide thin films prepared directly at interfaces are reviewed. The systems range from monolayers, single-layer analogs of Prussian blue-like networks, to bulk powders prepared as thin films. Monolayer networks are prepared at the air/water interface and transferred to solid supports using Langmuir-Blodgett film methods. Films of bulk materials are prepared directly on solid surfaces using a templated sequential deposition procedure. The magnetic properties of the films have been explored, and in some cases, these monolayers and surface films give rise to new behavior that is only possible because of the fabrication method or thin film architecture. The methods of synthesis can generate oriented samples, even when the materials are poorly crystalline. Furthermore, the interface-assembled networks are inherently anisotropic, leading to phenomena not present in the solid-state analogs, such as anisotropic photomagnetism in a thin film of Rb_jCo_k[Fe(CN)₆]_l·nH₂O.     

Influence of target surface degradation on the properties of r.f. magnetron‐sputtered calcium phosphate coatings

This paper reports a detailed study of how repeated r.f. magnetron sputtering from a hydroxyapatite (HA) powder target affects the nature and reproducibility of a sequential series of thin‐film coatings deposited onto Ti6Al4V substrates. An evaluation of the effective lifespan of the HA sputter targets and the reproducibility of the calcium phosphate (CaP) coatings produced from them has been made from Fourier transform infrared spectroscopy, XPS and, as appropriate, atomic force microscopy and SEM/energy dispersive x‐ray analyses. The annulus region of the target surface, from which sputtering under r.f. magnetron conditions normally occurs, showed severe surface degradation after only one deposition run, as indicated by significant PO₄^3? and OH^? depletion. This deterioration continued after each subsequent deposition cycle but to a much lesser extent than that observed in the initial sputtering period. The layers produced from all of the sputter runs contained the expected Ca²⁺ and PO₄^3? species characteristic of a CaP system but were OH^? deficient in the as‐deposited state. However, the chemical and morphological properties of the coatings did not change significantly until after the third consecutive sputter cycle. Hence, these data indicate that, even though a significant level of degradation of the HA target occurs at the outset of the sputtering procedure, the general plasma conditions employed here have a dominant influence on the coating properties until a critical degradation condition is met. As such, the compacted HA powder targets of interest can have a life‐cycle greater than single usage without detriment to the chemistry and morphology of the coatings produced from them. Copyright © 2003 John Wiley & Sons, Ltd.     

A technique for coating capillary columns with a very thick film of cross-linked stationary phase

A method for preparation of capillary columns and traps with a very thick film (up to 100 μm) of stationary phase is described. The principle of this method is based on an immediate fixation of a film of prepolymer, formed during dynamic coating. Thus, the development of film irregularities, such as are caused by Rayleigh instability is avoided. Fixation of the film is conveniently accomplished by heat-accelerated crosslinking as was demonstrated in this work, where a commercially available silicone prepolymer (Sylgard 184, Dow Corning) was employed. The low phase ratio columns which thus can be prepared are interesting both in chromatography with dense mobile phases and as enrichment devices. Examples of the latter application are shown, where trace organic components from air and water were concentrated.     

氧化钨薄膜微型电化学器件的研究

本文论述了WO_3薄膜氢离子敏器件的结构、原理、制备技术和测试分析。利用WO_3薄膜在H+溶液中由绝缘转化为导电特性,成功地研制成氢离子敏器件。这是一种简易而经济的微型pH敏器件技术。     

COMPENSATION EFFECT OF POLYIMIDE THIN FILMS ON NORMALLY WHITE TWISTED NEMATIC LIQUID CRYSTAL DISPLAYS

The disadvantages of Normally White Twisted Nematic Liquid Crystal Display (NW-TN-LCD) were discussed. The reason that the negative birefringent polyimide thin filmswere used to compensate NW-TN-LCD to decrease off-axis leakage, improve contrast ratiosand enlarge viewing angles was explained in this paper. A certain polyimide thin film wastaken as an example to show compensation effect on NW-TN-LCD.